Canon I Sensys Lbp6230dw User Guide

2Configure the IPv6  DNS  settings.The [Use IPv6]  check  box must be selected to  configure the  settings.  
Setting IPv6  Addresses
[DNS  Settings]
[Primary DNS  Server Address]
Enter the  IP  address of the  DNS server. Addresses that  start with "ff"  (multicast addresses)  and  the  loopback address
(::1) cannot  be entered.
[Secondary DNS  Server Address]
When  there is  a secondary DNS server, enter its IP  address. Addresses that  start with "ff"  (multicast addresses)  and
the...

Restart the machine.
Turn  OFF  the  machine, wait  for  at least  10 seconds,  and  turn  it back ON.
LINKS
Setting IPv4  Address
Setting IPv6  Addresses
Viewing Network Settings
5
>Ý>Ü>Þ>Ì>Û>Ì>Þ>à>Ü
 

0JFC -025
Configuring WINS
Windows  Internet  Name Service (WINS) is  a name resolution service that  associates  a NetBIOS  name (a computer  or printer name in a
NetBIOS  network) with an  IP  address. To use WINS, a WINS server  must be specified.
To register  this machine with a WINS server, a NetBIOS  name and  workgroup name must be set. Configuring  NetBIOS
This function is  not  available in an  IPv6  environment.
Start  the Remote UI  and  log  on in System Manager Mode.  Starting the Remote UI...

[WINS  Resolution]
Select the  check  box to  use WINS for  name resolution.  When  not  using WINS, clear the  check  box.
[WINS  Server Address]
Enter the  IP  address (IPv4)  of the  WINS server.
If  the  IP  address of the  WINS server  is  obtained from a DHCP server, the  obtained IP  address overrides the  IP  address entered  in
the  [WINS Server  Address] text box.
[Scope ID]
If  the  network is  divided into several groups with scope  IDs  (identifiers for  groups of devices in the  network),...

0JFC -026
Configuring NetBIOS
To register  this machine with a WINS server, a NetBIOS  name and  workgroup name must be set.
Start  the Remote UI  and  log  on in System Manager Mode.  Starting the Remote UI
Click [Settings/Registration].
Click [Network Settings]  [TCP/IP  Settings].
Click [Edit] in [NetBIOS Settings].
Enter  the required information.
[NetBIOS Name]
Enter up  to  15 alphanumeric  characters  for  the  NetBIOS  name of the  machine.
[Workgroup Name]
Enter up  to  15 alphanumeric...

NetBIOS  or workgroup names  that  start with an  asterisk  (*)  cannot  be registered with a WINS server.
Click [OK].
Restart the machine.
Turn  OFF  the  machine, wait  for  at least  10 seconds,  and  turn  it back ON.
LINKS
Configuring  WINS
6
7
>Ý>Ü>â>Ì>Û>Ì>Þ>à>Ü
 

0JFC -027
Configuring SNTP
Simple Network Time Protocol (SNTP)  enables you to  adjust the  system clock by using a time  server  on  the
network. When  you use SNTP,  the  system checks the  timer server  periodically, so that  the  system clock is  always
accurate. The time  is  based on  Coordinated  Universal Time (UTC),  so specify  the  time  zone setting before
configuring SNTP (
Timer  Settings).
The SNTP of the  machine supports both  NTP (version 3)  and  SNTP (versions  3  and  4)  servers....

[Use SNTP]
Select the  check  box to  use SNTP for  synchronization.  Clear the  check  box if  you do not  want to  use this function.
[NTP Server Name]
Enter the  IP  address of the  NTP or SNTP server. If  a DNS server  is  available on  the  network, you can enter "."  (FQDN)  of up  to  255 alphanumeric  characters  instead (example:  "ntp.example.com").
[Polling  Interval]
Enter an  interval  from 1  to  48 hours to  specify  how often to  poll  the  time  server.
Click [OK]....

>Ý>Ü>å>Ì>Û>Ì>Þ>à>Ü
 

0JFC -028
Monitoring and Controlling the Machine with SNMP
Simple Network Management Protocol (SNMP)  is  a protocol for  monitoring and  controlling communication devices in a network by using a
Management Information Base  (MIB)  database. The machine supports SNMPv1 and  security-enhanced SNMPv3.  They allow you to  check
the  status of the  machine from a computer  when you print documents or use the  Remote  UI. You  can enable  either SNMPv1 or SNMPv3,
or both  at the  same time. Specify the...