Canon I Sensys Lbp6230dw User Guide

Enable or disable encrypted  communication via  SSL  and  IP  address packet  filtering.
Remote UI  Settings
Select whether  to  use SSL  encrypted  communication.  Enabling  SSL Encrypted Communication for the Remote  UI
Use  SSL Off
On
Key  and  Certificate Settings
Register key  pairs, or generate  them on  the  machine. You  can check  and  verify registered key  pairs. Configuring  Settings  for
Key  Pairs and  Digital Certificates
CA Certificate Settings
Register a CA certificate.  One  CA...

Use  FilterOff
On
Default  Policy Reject
Allow
IPv4 Address: Inbound Filter
Reject data received by the  machine from a computer  with a specified IPv4  address. Specifying IP Addresses  for Firewall
Rules
Use  Filter Off
On
Default  Policy Reject
Allow
IPv6 Address: Outbound Filter
Do not  allow the  machine to  send data to  a computer  with a specified IPv6  address. Specifying IP Addresses  for Firewall
Rules
Use  Filter Off
On
Default  Policy Reject
Allow
IPv6 Address: Inbound Filter
Reject data...

Make  settings related to  network functions.
TCP/IP Settings
Specify settings for  using the  machine in a TCP/IP  network, such as IP  address settings.
IPv4 Settings
Specify settings for  using the  machine in an  IPv4  network. Setting IPv4  AddressConfiguring  DNS
IP Address Settings Auto  AcquireSelect ProtocolOff
DHCP
BOOTP
RARP
Auto  IP On
Off
IP  Address
Subnet  Mask
Gateway Address
DNS  Settings Primary DNS Server  Address
Secondary DNS Server  Address
Host Name
Domain  Name
DNS Dynamic...

Register Manual AddressOffOn
Register Stateful  Address
OffOn
Register Stateless Address
OffOn
DNS Dynamic Update Interval:  0  to  24 to  48 (hours)
mDNS Settings Use  mDNSOff
On
Use  Same  mDNS  Name as IPv4Off
On
mDNS  Name
WINS  Settings
Specify settings for  Windows  Internet  Name Service (WINS), which provides a NetBIOS  name for  IP  address resolutions  in a mixed
network environment of NetBIOS  and  TCP/IP. Configuring  WINS
WINS Resolution Off
OnWINS Server  Address
Scope ID
LPD Print...

Respond to  DiscoveryOff
On
Scope Name
Port  Number Settings
Change  port numbers  for  protocols according to  your network environment. Changing Port Numbers
LPD 1  to  515
 to  65535
RAW 1  to  9100
 to  65535
HTTP 1  to  80
 to  65535
SNMP 1  to  161
 to  65535
WSD Multicast Discovery 1  to  3702
 to  65535
Multicast Discovery 1  to  427
 to  65535
MTU  Size Settings
Select the  maximum  size of packets  the  machine sends or receives.  Changing the Maximum Transmission  Unit
MTU Size 1300
1400
1500...

Dedicated Port  Settings
Enable or disable the  dedicated  port. The dedicated  port is  used when using the  Printer Status Window  to  make machine settings and
acquire information  about  the  machine.
Use  Dedicated Port Off
On
Waiting Time for Connection at Startup
Specify a wait  time  for  connecting to  a network. Select the  setting depending on  your network environment. Setting a Wait Time
for Connecting to a Network
Waiting  Time 0
 to  300 (seconds)
Ethernet Driver Settings
You  can specify...

Initializes  settings and  returns  the  machine to  the  factory default  state.
Initialize  Menu
Returns the  settings in the  [Preferences]  Menu  to  the  factory default  settings.  Initializing  Preferences  Settings
Initialize  System Management Settings
Returns the  settings in the  [System Management Settings] Menu  to  the  factory default  settings.  Initializing  System
Management  Settings
Initialize  Key  and  Certificate
Returns key  and  certificate settings to  the  factory default...

0JFC -032
Troubleshooting
When  a problem occurs, check  this chapter  to  find out  solutions  before contacting Canon.
Paper Jams
If  the  paper  jams, see  Clearing Paper Jamsto  remove  the  jammed paper.
A Message Appears
If  the  Printer Status Window  displays an  error  message,  see  When an Error  Message Appears .
Common Problems
If  you suspect that  the  machine is  malfunctioning,  see  the  following  sections before contacting Canon.
Common  Problems
Installation/Settings Problems...

0JFC -033
Clearing Paper Jams
If  paper  jams, the (Alarm)  indicator flashes,  and  the  message   and  paper  jam locations are  displayed in
the  Printer Status Window.  Clear the  jams in the  displayed order of jam locations using the  procedures described in the  section s referred
to  below. Before starting, carefully read  the  safety instructions in 
Important  Safety Instructions .

Paper Jams Inside  the Rear Cover

Paper Jams Inside  the Top Cover
When  removing the jammed paper,  do not turn...

Open the rear cover.
Gently pull out the paper.
Close  the rear cover.
Continue  to 
Paper  Jams Inside the Top Cover
If  the  jammed paper  cannot  be removed easily, do not  try to  pull it out  forcibly. Proceed to  the  next step.
Gently pull out the paper.
Output trayManual feed slot
Multi- purpose  trayFold  the  tray  cover, and  then  pull out  the  paper.  If  there is  paper  loaded  in the  multi -purpose tray, remove  it before
proceeding to  clear paper  jams.
Close  the auxiliary tray, and...