Canon I Sensys Lbp6230dw User Guide

When pulling  out  the sealing  tape
If  any sealing tape remains  inside the  toner cartridge,  print quality  may  deteriorate.Do not  pull the  sealing tape at an  angle.  If  the  sealing tape breaks, you may  not  be able  to  pull it out  completely.
If  the  sealing tape becomes stuck when pulling  it out, keep  pulling  until it is  completely removed.
Replace the toner  cartridge.
Close  the top cover.
6
7
>Ý>å>Ý>Ì>Û>Ì>Þ>à>Ü
 

0JFC -03R
Printing Setting Lists
You  can print setting lists from the  Printer Status Window.  This is  convenient  when you want to  print a list  of network settings or a list  of
power saving  and  other configuration settings for  the  machine. Setting lists are  formatted to  print on  A4  size paper.  Before starting, load
A4  size paper  in the  multi -purpose tray  or manual  feed  slot.  
Loading Paper in the Multi- Purpose TrayLoading Paper in the
Manual Feed Slot
Select the machine by...

You  can also  use the  machine's  (Paper) key  to  print and  view a list  of the  machine's  IPv4  settings,  MAC address,
wired/wireless LAN settings,  and  version information. 
Viewing Network Settings
>Ý>å>ß>Ì>Û>Ì>Þ>à>Ü
 

0JFC -03S
Viewing the Page Counter Value
You  can check  the  total number of pages that  the  machine has printed by viewing the  page counter in the  Printer Status Window.
Select the machine by clicking   in the system  tray.
Select [Options]  [Counter Information].
The total number of printed pages is  displayed.
1 
2
>Ý>å>à>Ì>Û>Ì>Þ>à>Ü
 

0JFC -03U
Initializing Settings
You  can restore the  machine's  settings to  the  factory default  settings.
Initializing  Preferences  Settings
Initializing  System Management  Settings
Initializing  Key  and  Certificate Settings
>Ý>å>á>Ì>Û>Ì>Þ>à>Ü
 

0JFC -03W
Initializing Preferences Settings
You  can initialize the  settings of the  Remote  UI [Preferences]  menu (Setting Menu List) to  return them to  the  factory default
settings.
Start  the Remote UI  and  log  on in System Manager Mode.  Starting the Remote UI
Click [Settings/Registration].
Click [Initialize Setting Information]  [Initialize Menu].
Select the settings  to initialize, and  then click [Initialize].
[Menu to Initialize]
Select the  settings to  initialize from the  drop-down list....

0JFC -03X
Initializing System Management Settings
You  can initialize the  settings in the  Remote  UI [System Management Settings] menu (Setting Menu List) to  return them to  the
factory default  settings.
To initialize [Key and  Certificate Settings] and  [CA Certificate Settings] in [Security Settings],  see  Initializing  Key  and
Certificate Settings .
Start  the Remote UI  and  log  on in System Manager Mode.  Starting the Remote UI
Click [Settings/Registration].
Click [Initialize Setting...

If you initialized  the network settings,  restart the machine.
Turn  OFF  the  machine, wait  for  at least  10 seconds,  and  turn  it back ON.
Initializing by Using the Reset Button
You  can also  use the  reset button on  the  rear of the  machine to  initialize the  system management  settings.  If  you turn  OFF  the
machine, and  then  turn  ON the  machine while pressing the  reset button () with an  object  such as a pen  tip or thin  pin, all of
the  settings in the  [System Management...

0JFC -03Y
Initializing Key and Certificate Settings
You  can restore the  settings of key  pairs (Key and  certificate settings)  and  CA certificates  to  the  factory default  settings.  Note that  any
key  pairs that  you have registered in the  machine and  any CA certificates  (except  the  preinstalled CA certificates)  will  be deleted  by the
initialization.
If  you perform  this initialization,  SSL  encrypted  communication requiring a key  pair  will  not  be possible.  To use SSL  encrypted...

LINKS
Configuring  Settings  for Key  Pairs and  Digital Certificates
>Þ>Ü>Ü>Ì>Û>Ì>Þ>à>Ü