Canon I Sensys Lbp6230dw User Guide

0JFC -00R
Loading Paper in the Multi-Purpose Tray
Load  paper  used frequently in the  multi -purpose tray. If  you want to  print using paper  not  loaded  in the  multi -purpose tray, load the
paper  in the  manual  feed  slot.  Loading Paper in the Manual Feed Slot
Always  load paper  in portrait  orientation
Paper  cannot  be loaded  in landscape orientation. Be sure  to  load paper  in portrait orientation, as shown in the  illustration below.
Open the multi-purpose tray.
When replenishing paper...

Keep the paper stack within  the load  limit  guides.
Make  sure  that  the  paper  stack  does not  exceed the  load limit guides (
). Loading too much paper  can cause  paper  jams.
When  loading  envelopes or preprinted paper,  see  Loading Envelopesor Loading Preprinted Paper .
Align  the paper  guides against the edges of the paper.
Align the  paper  guides securely  against the  edges of the  paper.
Align  the paper guides  securely  against the paper
Paper  guides that  are  too loose or too tight...

After reloading paper  that  has run  out  during printing,  or resetting the  paper  after a paper  error  notification,  press the  
(Paper) key  to  restart printing.
Printing on the Back  Side of Printed Paper  (Manual 2-Sided Printing)
You  can print on  the  back side  of printed paper.  Flatten  any curls on  the  printed paper  and  insert it into the  multi -purpose tray
with the  side  to  print face up  (previously printed side  face down).
Load  only one sheet of paper  each time  you print....

0JFC -04Y
Loading Paper in the Manual Feed Slot
If  you want to  print using paper  not  loaded  in the  multi -purpose tray, load the  paper  in the  manual  feed  slot.  Load  paper  used
frequently in the  multi -purpose tray. Loading Paper in the Multi- Purpose Tray
Always  load paper  in portrait  orientation
Paper  cannot  be loaded  in landscape orientation. Be sure  to  load paper  in portrait orientation, as shown in the  illustration below.
Only one sheet  can be  loaded at a time
Load  only...

When  loading  envelopes or preprinted paper,  see  Loading Envelopesor Loading Preprinted Paper .
Align  the paper  guides against the edges of the paper.
Move  the  paper  guides inward and  align  them securely  against the  edges of the  paper.
Align  the paper guides  securely  to the width of the paper
Paper  guides that  are  too loose or too tight  can cause  misfeeds or paper  jams.
When  performing printing,  pull out  the  auxiliary tray  in advance  so that  the  output paper  does not  fall...

0JFC -00S
Loading Envelopes
Make  sure  to  flatten  any curls on  envelopes before loading  them. Also  pay attention to  the  orientation of envelopes and  which side  is
face up.
Before  Loading Envelopes
Loading Envelopes  in the Multi- Purpose Tray and  Manual Feed Slot
This section  explains how to  load envelopes in the  orientation you want, as well as preparations  that  you need to  complete before
loading  envelopes.  For a complete description of the  procedure for  loading  envelopes in the...

Load  the  envelopes Monarch,  No. 10 (COM10),  DL, or C5  in portrait orientation (with the  short edge toward  the  machine), with the  non-
glued side  (front  side)  face up.  You  cannot  print on  the  reverse side  of envelopes.
When  loading  in the  manual  feed  slot,  only one envelope can be loaded  at a time.
Load  the  envelopes so that  the  edge with the  flap  is  toward  the  left  side  as shown in the  illustration.
Multi- purpose  tray
Manual feed slot
Loading Envelopes  in the...

0JFC -00U
Loading Preprinted Paper
When  you use paper  that  has been preprinted with a logo or other information, pay attention to  the  orientation of the  paper  when
loading. Load  the  paper  in accordance with the  layout  and  printing method so that  the  document is  printed on  the  logo side  of paper  in
the  proper orientation.
Making 1 - Sided Printing Paper with a Logo
Making 2 - Sided Printing Paper with a Logo
This section  explains how to  load preprinted paper  with the  proper...

When  loading  paper  in the  manual  feed  slot,  only one sheet can be loaded  at a time.
Printing Paper with a Logo in Portrait Orientation
Printing Paper with a Logo in Landscape  Orientation
>ß>å>Ì>Û>Ì>Þ>à>Ü
 

0JFC -00W
Printing
You  can print documents made  with applications  on  your computer  by using the  printer driver. There  are  useful  settings in the  printer
driver, such as enlarging/reducing  and  poster  printing,  that  enable  you to  print your documents in various ways. Before you can use
these functions,  you need to  install the  printer driver  on  your computer  and  complete some  other preparations. For details, see  Printer
Driver  Installation  Guide.
Depending on  the  operating...