Canon Eos Rebel T5 1200 Instruction Manual

241
Preparing to Print
6Play back the image.
 Press the  button.
X The image will appear, with the < w> 
icon on the upper left of the screen to 
indicate that the camera is connected 
to a printer.
wPictBridge
  Before using the printer, make sure it has a PictBridge connection port.
  Movies cannot be printed.
  The camera cannot be used with printers conforming only to CP Direct or 
Bubble Jet Direct.
  Do not use any interface cable other than the one provided.
  If there is a long beeping sound in...

242
The screen display and setting options will differ depending on the 
printer. Some settings may not be available. For details, refer to the 
printer’s instruction manual.
1Select the image to be printed.
 Check that the < w> icon is 
displayed on the upper left of the LCD 
monitor.
  Press the < Y> < Z> keys to select 
the image to be printed.
2Press .
X The print setting screen will appear.
3Select [Paper settings].
  Select [ Paper settings ], then press 
< 0 >.
X The paper settings screen will...

243
w Printing
 Select the size of the paper loaded in 
the printer, then press < 0>.
X The paper type screen will appear.
  Select the type of the paper loaded in 
the printer, then press < 0>.
X The page layout screen will appear.
  Select the page layout, then press 
.
X The print setting screen will reappear.
*1:From the Exif data, the camera name, lens name, shooting mode, shutter speed, aperture, 
exposure compensation amount, ISO speed, white balance, etc., will be imprinted.
*2: After ordering...

w Printing
244
4Set the printing effects (image 
optimization).
 Set them if necessary. If you do not 
need to set any printing effects, go to 
step 5.
 Contents displayed on the screen 
differ depending on the printer.
  Select the option, then press .
  Select the desired printing effect, then 
press < 0>.
  If the < e> icon is displayed brightly 
next to < z>, you can also adjust 
the printing effect (p.246).
* When you change the printing effects, changes are reflected in the image 
displayed on the...

245
w Printing
5Set the date and file number 
imprinting.
 Set them if necessary.
  Select <
I>, then press < 0>.
  Set the print settings as desired, then 
press < 0>.
6Set the number of copies.
  Set it if necessary.
  Select , then press .
  Set the number of copies, then press 
.
7Start printing.
  Select [ Print], then press < 0>.
  The [ Default ] setting for printing effects and other options are the 
printer’s own default settings as set by the printer’s manufacturer. Refer 
to the printer’s...

w Printing
246
In step 4 on page 244, select the printing 
effect. When the < e> icon is displayed 
brightly next to < z>, you can press 
the < B> button. You can then adjust 
the printing effect. What can be adjusted 
or what is displayed will depend on the 
selection made in step 4.
  Brightness
The image brightness can be adjusted.
  Adjust levels
When you select [ Manual], you can change 
the histogram’s distribution and adjust the 
image’s brightness and contrast.
With the Adjust levels screen...

247
w Printing
You can crop the image and print only an 
enlarged version of the cropped portion, 
as if the image had been recomposed.
Set the cropping right before printing. 
If you change the print settings after 
setting the cropping, you may have to set 
the cropping again before printing.
1 On the print setting screen, select [Cropping].
2 Set the cropping frame size, position, and aspect ratio.
 The image area within the cropping  frame will be printed. The 
cropping frame’s aspect ratio can be...

w Printing
248
 Depending on the printer, the cropped image area may not be printed as 
you specified.
  The smaller you make the cropping fr ame, the grainier the picture will 
look in the print.
  While cropping the image, look at the camera’s LCD monitor. If you look 
at the image on a TV screen, the cropping frame may not be displayed 
accurately.
Handling Printer ErrorsIf you resolve a printer error (no ink, no paper, etc.) and select [Continue] to 
resume printing but it does not resume, operate...

249
You can set the print type, date imprinting, and file number imprinting. 
The print settings will be applied to all print-ordered images. (They 
cannot be set individually for each image.)
1Select [Print order].
 Under the [x 1] tab, select [Print 
order ], then press < 0>.
2Select [Set up].
  Select [ Set up], then press < 0>.
3Set the option as desired.
  Set the [ Print type ], [Date ], and [ File 
No. ].
  Select the option to be set, then press 
. Select the desired setting, then 
press < 0>.
W...

W Digital Print Order Format (DPOF)
250
4Exit the setting.
  Press the < 7> button.
X The print order screen will reappear.
  Next, select [Sel.Image], [ Byn ], or 
[All image ] to order the images to be 
printed.
Print type
KStandard Prints one image on one sheet.
LIndexMultiple thumbnail images are printed on  one sheet.
K
LBothPrints both the standard and index prints.
Date On
[On ] imprints the recorded date on the print.
Off
File numberOn[On ] imprints the file number on the print.
Off
  Even if...