Canon Eos Rebel T5 1200 Instruction Manual

191
Handy Features
Shooting SettingsRecording Images
AF operationOne-Shot AFImage quality73
AF point selectionAutomatic 
selectionPicture StyleAuto
Auto Lighting 
OptimizerStandard
Drive/self-timeru
 (Single shooting)Peripheral 
illumination 
correctionEnable/
Correction 
data retained
Metering mode q
 (Evaluative 
metering)
ISO speedAUTO (Auto)Color spacesRGB
ISO Auto Max.: 3200White balanceQ (Auto)
Exposure 
compensation/AEBCanceledCustom white 
balanceCanceled
Flash exposure 
compensation 0...

Handy Features
192
Camera SettingsLive View Shooting
Auto power off30 sec.Live View shootingEnable
BeepEnableAF methodFlexiZone - Single
Release shutter 
without cardEnableGrid display
Off
Aspect ratio3:2
Image review time2 sec.Metering timer8 sec.
Histogram display Brightness
Image jump with 6e (10 images)Movie Shooting
Auto rotateOn z DMovie exposureAuto
LCD brightnessAF methodFlexiZone - Single
LCD off/on buttonShutter buttonAF with shutter 
button during 
movie shootingDisableDate/Time/ZoneUnchanged...

193
Handy Features
The shooting settings display (p.52) can be turned on or off by pressing 
the shutter button halfway.Under the [52] tab, select [ LCD off/on 
btn ], then press < 0>. The available 
settings are described below. Select the 
desired setting, then press < 0>.
  [Shutter btn.]: When you press the shutter button halfway, the 
display will turn off. And when you let go of the 
shutter button, the display will turn on.
  [Shutter/DISP]: When you press the shutter button halfway, the 
display...

194
The built-in flash and external Speedlite settings can be set with the 
camera’s menu. You can use the camera’s menu to set the external 
Speedlite function settings only if an EX-series Speedlite compatible 
with this function is attached.
The setting procedure is the same as when setting a camera menu 
function.
Select [Flash control].
  Under the [z 1] tab, select [Flash 
control ], then press < 0>.
X The flash control screen will appear.
  Normally, set this to [Enable ].
  If [Disable] is set,...

195
3 Setting the Flash N
With [Built-in flash func. setting] and [External flash func. setting], you 
can set the functions in the table below. The functions displayed under 
[
External flash func. setting] will vary depending on the Speedlite model.
  Select [ Built-in flash func. setting ] 
or [External flash func. setting ].
X The flash functions will be displayed. 
The highlighted functions can be 
selected and set.
[Built-in flash func. setting] and [External flash func. setting] Functions
*...

3 Setting the Flash N
196
 Flash mode
When using an external Speedlite, y ou can select the flash mode to 
suit your desired flash shooting.
 [E-TTL II ] is the standard mode of 
EX-series Speedlites for automatic 
flash shooting.
  [Manual flash ] enables you to set the 
flash output yourself. This is for 
advanced users.
  Regarding other flash modes, refer to 
the instruction manual of an external 
Speedlite compatible with the 
functions.
  Shutter synchronization
Normally, set this to [ 1st curtain]...

197
3 Setting the Flash N
 Clear flash settings
On the [External flash func. setting ] screen, press the  
button to display the screen to clear the flash settings.  When you 
select [OK], the settings for the built-in flash and external 
Speedlite will be cleared.
The Custom Functions displayed under [ External flash C.Fn setting] 
will vary depending on the Speedlite model.
1Display the Custom Function.
  Select [ External flash C.Fn setting ], 
then press < 0>.
2Set the Custom Function.
  Press the <...

198
Dusts entering the camera can adhere to the image sensor and cause 
dust spots to be visible on the captured images. To erase these dust 
spots, you can append the Dust Delete Data to the images. The Dust 
Delete Data is used by Digital Photo Professional (EOS software, 
p.318) to erase the dust spots automatically.
 Prepare a solid white object such as a sheet of paper.
  Set the lens focal length to 50 mm or longer.
  Set the lens’s focus mode switch to < MF> and set the focus to 
infinity ( u). If...

199
3 Appending Dust Delete Data N
3Shoot a solid-white object.
 At a distance of 20 cm - 30 cm (0.7 ft. - 
1.0 ft.), fill the viewfinder with a 
patternless, solid-white object and take 
a picture.
XThe picture will be taken in aperture-
priority AE mode at an aperture of f/22.
 Since the image will not be saved, the 
data can still be obtained even if there 
is no card in the camera.
X When the picture is taken, the camera 
will start collecting the Dust Delete 
Data. When the Dust Delete Data is...

200
If dusts adhere to the image sensor and dust spots appear on the 
images, you can clean the image sensor yourself with a camera blower. 
Before cleaning the sensor, detach the lens from the camera.
The surface of the image sensor is extremely delicate. If the 
sensor needs to be cleaned directly, having it done by a Canon 
Service Center is recommended.
1Select [Clean manually].
  Under the [5 2] tab, select [ Clean 
manually ], then press < 0>.
2Select [OK].
  Select [ OK], then press < 0>.
X In a...