Canon Eos Rebel T5 1200 Instruction Manual

201
3 Manual Sensor Cleaning N
 While cleaning the sensor, never do any of the following. If the 
power is cut off, the shutter will close and the shutter curtains and 
image sensor may get damaged.
• Setting the power switch to < 2>.
• Opening the card slot/battery compartment cover.
  The surface of the image sensor is  extremely delicate. Clean the sensor 
with care.
  Use a plain blower without any brush  attached. A brush can scratch the 
sensor.
  Do not insert the blower tip inside the camera...

COPY  

203
8
Image Playback
This chapter explains functions related to viewing 
photos and movies, with more detail than in Chapter 2 
“Basic Shooting and Image Playback”. Here you will 
find explanations of how to play back and erase photos 
and movies with the camera and view them on a TV set.
Images shot and saved with another deviceThe camera may not be able to properly display images captured 
with a different camera, edited with a computer, or that have had their 
file names changed.
COPY  

204
Search for images quickly with the index display showing four or nine 
images on one screen.
1Play back the image.
 When you press the < x> button, the 
last image captured will be displayed.
2Switch to the index display.
  Press the < Hy> button.
X The 4-image index display will 
appear. The selected image is 
highlighted in an orange frame.
  Press the < Hy> button again to 
switch to the 9-image display.
  Pressing the < u> button will switch 
the display between nine images, four 
images and one...

205
x Searching for Images Quickly
In the single-image display, you can turn the  dial to jump through 
the images forward or backward according to the jump method set.
1Select [Image jump w/ 6].
 Under the [x 2] tab, select [Image 
jump w/ 6], then press < 0>.
2Select the jump method.
  Press the < S> cross keys to select 
the jump method, then press < 0>.
d : Display images one by one
e : Jump 10 images
f : Jump 100 images
g : Display by date
h : Display by folder
i: Display movies only
j: Display...

206
You can magnify a captured image by approx. 1.5x to 10x on the LCD monitor.
1Magnify the image.
 Press the < u> button during image 
playback.
X The image will be magnified.
  If you hold down the < u> button, the 
image will be magnified until it 
reaches the maximum magnification.
  Press the < Hy> button to reduce 
the magnification. If you hold down 
the button, the magnification will be 
reduced to the single-image display.
2Scroll around the image.
  Use the < S> cross keys to scroll 
around...

207
You can rotate the displayed image to the desired orientation.
1Select [Rotate image].
 Under the [x 1] tab, select [Rotate 
image], then press < 0>.
2Select an image.
  Press the < Y> < Z> keys to select 
the image to be rotated.
  You can also select an image in the 
index display (p.204).
3Rotate the image.
 Each time you press < 0>, the image 
will rotate clockwise as follows: 
90°  9 270°  9 0°.
  To rotate another image, repeat steps 
2 and 3.
  To exit and return to the menu, press 
the < M >...

208
You can rate images (still photos and movies) with one of five rating marks: l/m /n/o/p. This function is called rating.
1Select [Rating].
 Under the [x 2] tab, select [Rating ], 
then press < 0>.
2Select an image.
  Press the < Y> < Z> keys to select a 
still photo or movie to be rated.
  You can display three images by 
pressing the < Hy> button. To 
return to the single-image display, 
press the < u> button.
3Rate the image.
  Press the < W> < X> keys to select a 
rating.
X The total number of...

209
3 Setting Ratings
The total number of images with a given rating that can be displayed is up to 
999. If there are more than 999 images with a given rating, [ ###] will be 
displayed for that rating.
Taking Advantage of Ratings  With [x 2: Image jump w/ 6], you can display only images with a 
specific rating.
  With [x 2: Slide show ], you can play back only images with a specific 
rating.
  With Digital Photo Professional (EOS software, p.318), you can select 
only images with a specific  rating...

210
During single-image display, you can press the  button to set any 
of the following: [ : Protect images] , [b : Rotate image],  [9 : 
Rating] , [U: Creative filters], [ S: Resize (JPEG images only)],  [e : 
Image jump w/ 6].
For movies, only the functions in bold above can be set.
1Press the  button.
  During image playback, press the 
 button.
X The Quick Control options will 
appear.
2Select a function and set it.
  Press the < W> < X> keys to select a 
function.
X The name and current setting of...