Canon Eos Rebel T5 1200 Instruction Manual

281
3 Menu Settings
  Set-up 3  (Yellow)Page
9 My Menu  (Green)
Certification Logo 
DisplayDisplays some of the logos of the camera’s 
certifications267
Custom Functions 
(C.Fn)Customize camera functions as desired256
Copyright informationDisplay copyright information / Enter author’s 
name / Enter copyright details / Delete 
copyright information186
Clear settingsClear all camera settings / Clear all Custom 
Func. (C.Fn)190
Firmware versionFor updating the firmware-
My Menu settingsRegister...

3 Menu Settings
282
 Movie 1  (Red)Page
 Movie 2 (Red)
k Movie Shooting
Movie exposureAuto / Manual172
AF method
FlexiZone - Single / u Live mode / 
Quick mode172
AF with shutter button 
during movie shooting 
k
Disable / Enable172
k Shutter button / 
AE lock button
AF/AE lock / AE lock/AF /
AF/AF lock, no AE lock /
AE/AF, no AE lock173
k Highlight tone 
priority
Disable / Enable173
Movie recording size
1920x1080 ( 6/5 /4 ) /1280x720 ( 8/7 ) / 
640x480 (6 /5)164
Sound recording
Sound recording: Auto /...

283
3 Menu Settings
 Movie 3  (Red)Page
Exposure 
compensation1/3-stop increments, ±5 stops176
Auto Lighting 
Optimizer
Disable / Low / Standard / High176
Custom White Balance
Manual setting of white balance176
Picture Style
D Auto /  PStandard /
Q Portrait / R Landscape /
S Neutral / U Faithful /
V Monochrome / W User Def. 1-3
176
Menus for Movie Shooting Mode
 The [Z1], [Z2], and [Z3] tabs appear only in the movie shooting 
mode.
  The [ z2], [z 3], [ z 4], [ 53 ], and [ 9] tabs do not appear.
  The...

284
If a problem occurs with the camera, first refer to this Troubleshooting 
Guide. If this Troubleshooting Guide does not resolve the problem, 
contact your dealer or nearest Canon Service Center.
  Do not use any battery pack other than a genuine Canon Battery Pack 
LP-E10.
  If the battery charger has a problem, the protection circuit will stop the 
charging and the charge lamp will blink in orange. If this happens, 
unplug the charger’s power plug from the power outlet and detach the 
battery pack....

285
Troubleshooting Guide
 Use a fully-charged battery pack (p.30).
  The rechargeable battery pack performance will degrade over 
repeated use. Purchase a new one.
  The number of possible shots will decrease with any of the following 
operations:
• Pressing the shutter button halfway for a prolonged period.
• Activating the AF frequently without taking a picture.
• Using the lens’s Image Stabilizer.
• Using the LCD monitor frequently.
• Continuing Live View shooting or movie shooting for a prolonged...

Troubleshooting Guide
286
 Make sure the card is properly inserted (p.32).
  Slide the card’s write-protect switch to the write/erase position (p.32).
  If the card is full, replace the card or delete unnecessary images to 
make space (p.32, 227).
  If you try to focus in the One-Shot AF while the focus confirmation light 
 in the viewfinder blinks, a picture cannot be taken. Press the 
shutter button halfway again to refocus automatically, or focus 
manually (p.45, 97).
  If a card error message is...

287
Troubleshooting Guide
 Horizontal stripes (noise) or irregular exposures can be caused by 
fluorescent light, LED bulbs, or other light sources during viewfinder or 
Live View shooting. Also, the exposure or color tone may not come out 
properly. A slow shutter speed may solve the problem.
  During viewfinder shooting or Live View shooting, if you use a TS-E 
lens (except the TS-E17mm f/4L or TS-E24mm f/3.5L II) and shift or tilt 
the lens or use an Extension Tube, the standard exposure may not be...

Troubleshooting Guide
288
 Under [ 53: Custom Functions (C.Fn) ], if [6: Highlight tone priority ] 
is set to [ 1: Enable ], ISO 100 cannot be set. If [ 0: Disable] is set, ISO 
100 can be set (p.261). This also applies to movie shooting (p.173).
  Under [ 53: Custom Functions (C.Fn) ], if [6: Highlight tone priority ] 
is set to [ 1: Enable ], the [H] ISO speed (equivalent to ISO 12800) 
cannot be selected even when [ 2: ISO expansion] is set to [1: On]. If 
[ 6: Highlight tone priority ] is set to [0:...

289
Troubleshooting Guide
 In shooting modes (< A>   < 4> ) whose default 
settings are  (Auto flash), the built-in flash will rise automatically 
when necessary.
  If you shoot continuously with the built-in flash at short intervals, the 
flash may stop firing to protect the flash unit.
  If you use a flash unit other than an EX-series Speedlite, the flash will 
always be fired at full output (p.271).
  Under [ z1: Flash control ], if [Flash metering mode] for [ External 
flash C.Fn setting ] is set to...

Troubleshooting Guide
290
 The built-in flash’s pop-up mechanism moves slightly. This is normal 
and not a malfunction.
  If you use flash, the shutter will make two sounds each time you shoot 
(p.135).
  It indicates that the camera’s internal temperature is high. If the white 
 icon is displayed, the still photo’s image quality may deteriorate. 
If the red < E> icon is displayed, it indicates that the Live View or 
movie shooting will soon stop automatically (p.151, 177).
  If the card’s writing speed...