Canon Eos Rebel T5 1200 Instruction Manual

							241
Preparing to Print
6Play back the image.
 Press the  button.
X The image will appear, with the < w> 
icon on the upper left of the screen to 
indicate that the camera is connected 
to a printer.
wPictBridge
  Before using the printer, make sure it has a PictBridge connection port.
  Movies cannot be printed.
  The camera cannot be used with printers conforming only to CP Direct or 
Bubble Jet Direct.
  Do not use any interface cable other than the one provided.
  If there is a long beeping sound in step 5, it indicates a problem with the 
printer. Resolve the problem displayed in the error message (p.248).
 You can also print RAW images taken with this camera.
  If you use a battery pack to power the camera, make sure it is fully 
charged. With a fully-charged battery pack, you can print for approx. 2 hr. 
40 min.
  Before disconnecting the cable, first turn off the camera and printer. Hold 
the plug (not the cord) to pull out the cable.
  For direct printing, using AC Adapter Kit ACK-E10 (sold separately) to 
power the camera is recommended.
COPY  
						

							242
The screen display and setting options will differ depending on the 
printer. Some settings may not be available. For details, refer to the 
printer’s instruction manual.
1Select the image to be printed.
 Check that the < w> icon is 
displayed on the upper left of the LCD 
monitor.
  Press the < Y> < Z> keys to select 
the image to be printed.
2Press .
X The print setting screen will appear.
3Select [Paper settings].
  Select [ Paper settings ], then press 
< 0 >.
X The paper settings screen will 
appear.
w  Printing
Printer-connected icon
Print setting screen
* Depending on the printer, certain settings such as the date and file 
number imprinting and cropping may not be selectable.
Sets printing effects (p.244).
Sets date or file number imprinting to on or off.
Sets quantity to be printed.
Sets print area (p.247).
Sets paper size, type, and layout.
Returns to the screen in step 1.
Starts printing.
The paper size, type, and layout you have set are displayed.
COPY  
						

							243
w Printing
 Select the size of the paper loaded in 
the printer, then press < 0>.
X The paper type screen will appear.
  Select the type of the paper loaded in 
the printer, then press < 0>.
X The page layout screen will appear.
  Select the page layout, then press 
.
X The print setting screen will reappear.
*1:From the Exif data, the camera name, lens name, shooting mode, shutter speed, aperture, 
exposure compensation amount, ISO speed, white balance, etc., will be imprinted.
*2: After ordering the prints with “Digital Print Order Format (DPOF)” (p.249), 
printing by following “Direct Printing of Print-Ordered Images” (p.252) is 
recommended.
Q Setting th e Paper Size
Y Setting the Paper Type
U  Setting the Page Layout
Bordered The print will have white borders along the edges.
BorderlessThe print will have no borders. If your printer cannot print 
borderless prints, the print will have borders.
BorderedcThe shooting information*1 will be imprinted on the border on 9x13 
cm or larger prints.
xx-upOption to print 2, 4, 8, 9, 16, or 20 images on one sheet.
20-up c
35-up p20 or 35 images will be printed as thumbnails on A4 or Letter size paper*2.•[20-up c] will have the shooting information*1 imprinted.
DefaultThe page layout will vary depending on the printer model or its settings.
If the image’s aspect ratio is different from the printing paper’s aspect ratio, the image 
may be cropped significantly when you print it as a borderless print. If the image is 
cropped, it may look grainier on the paper due to the fewer number of pixels.
COPY  
						

							w Printing
244
4Set the printing effects (image 
optimization).
 Set them if necessary. If you do not 
need to set any printing effects, go to 
step 5.
 Contents displayed on the screen 
differ depending on the printer.
  Select the option, then press .
  Select the desired printing effect, then 
press < 0>.
  If the < e> icon is displayed brightly 
next to < z>, you can also adjust 
the printing effect (p.246).
* When you change the printing effects, changes are reflected in the image 
displayed on the upper left of the screen. Note that the printed image may 
look slightly different from the displayed image, which is only an 
approximation. This also applies to [Brightness] and [Adjust levels] on 
page 246.
Printing Effect Description
EOnThe image will be printed using the printer’s standard colors. 
The image’s Exif data is used to make automatic corrections.
EOffNo automatic correction will be applied.
EVividThe image will be printed with higher saturation to produce 
more vivid blues and greens.
ENRImage noise is reduced before printing.
0  B/WPrints in black-and-white with true blacks.
0 Cool tonePrints in black-and-white with cool, bluish blacks.
0 Warm tonePrints in black-and-white with warm, yellowish blacks.
zNaturalPrints the image in the actual colors and contrast. 
No automatic color adjustment is applied.
zNatural MThe printing characteristics ar e the same as the “Natural” 
setting. However, this setting enables finer printing 
adjustments than with “Natural”.
E DefaultThe printing will differ depending on the printer. For details, 
refer to the printer’s instruction manual.
COPY  
						

							245
w Printing
5Set the date and file number 
imprinting.
 Set them if necessary.
  Select <
I>, then press < 0>.
  Set the print settings as desired, then 
press < 0>.
6Set the number of copies.
  Set it if necessary.
  Select , then press .
  Set the number of copies, then press 
.
7Start printing.
  Select [ Print], then press < 0>.
  The [ Default ] setting for printing effects and other options are the 
printer’s own default settings as set by the printer’s manufacturer. Refer 
to the printer’s instruction manual to find out what the [ Default] settings 
are.
  Depending on the image’s file size and image-recording quality, it may 
take some time for the printi ng to start after you select [Print].
  If image tilt correction (p.247) is applie d, it may take longer to print the 
image.
  To stop the printing, press <
0> while [Stop ] is displayed, then select 
[ OK ].
  If you execute [ Clear all camera settings ] (p.190), all the settings will 
revert to their defaults.
COPY  
						

							w Printing
246
In step 4 on page 244, select the printing 
effect. When the < e> icon is displayed 
brightly next to < z>, you can press 
the < B> button. You can then adjust 
the printing effect. What can be adjusted 
or what is displayed will depend on the 
selection made in step 4.
  Brightness
The image brightness can be adjusted.
  Adjust levels
When you select [ Manual], you can change 
the histogram’s distribution and adjust the 
image’s brightness and contrast.
With the Adjust levels screen displayed, press 
the < B> button to change the position of 
the <
h>. Press the < Y>  keys to freely adjust the shadow level 
(0-127) or highlight level (128-255).
  kBrightener
Effective in backlit conditions that can make the subject’s face look 
dark. When [ On] is set, the face will be brightened for printing.
  Red-eye corr.
Effective in flash images where t he subject has red eye. When [On] 
is set, the red eye will be corrected for printing.
e  Adjustment of Printing Effects
  The [kBrightener ] and [Red-eye corr. ] effects will not be reflected on 
the screen.
  When [ Detail set. ] is selected, you can adjust the [ Contrast], 
[ Saturation ], [Color tone ], and [Color balance ]. To adjust the [Color 
balance ], use the <
S> cross keys. B is for blue, A for amber, M for 
magenta, and G for green. The image’s color balance will be corrected 
towards the selected color.
  If you select [ Clear all], all the printing effect settings will be reverted to 
their defaults.
COPY  
						

							247
w Printing
You can crop the image and print only an 
enlarged version of the cropped portion, 
as if the image had been recomposed.
Set the cropping right before printing. 
If you change the print settings after 
setting the cropping, you may have to set 
the cropping again before printing.
1 On the print setting screen, select [Cropping].
2 Set the cropping frame size, position, and aspect ratio.
 The image area within the cropping  frame will be printed. The 
cropping frame’s aspect ratio can be changed with [
Paper settings].
Changing the Cropping Frame Size When you press the < u> or  button, the size of the 
cropping frame will change. The smaller the cropping frame, the 
larger the image magnification will be for printing.
Moving the Cropping Frame
Press the  cross keys to move the frame over the image vertically or 
horizontally. Move the cropping frame until it covers the desired image area.
Rotating the Frame Pressing the < B> button will toggle the cropping frame 
between the vertical and horizontal  orientations. This enables you 
to create a vertically oriented print from a horizontal image.
Image Tilt Correction By turning the < 6> dial, you can adjust the image tilt angle up to 
±10 degrees in 0.5-degree increments. When you adjust the 
image tilt, the < O> icon on the screen will turn blue.
3 Press  to exit the cropping.
XThe print setting screen will reappear.
  You can check the cropped image area on the upper left of the 
print setting screen.
Cropping the Image
Tilt correction
COPY  
						

							w Printing
248
 Depending on the printer, the cropped image area may not be printed as 
you specified.
  The smaller you make the cropping fr ame, the grainier the picture will 
look in the print.
  While cropping the image, look at the camera’s LCD monitor. If you look 
at the image on a TV screen, the cropping frame may not be displayed 
accurately.
Handling Printer ErrorsIf you resolve a printer error (no ink, no paper, etc.) and select [Continue] to 
resume printing but it does not resume, operate the buttons on the printer to 
resume printing. For details on resuming the printing, refer to the printer’s 
instruction manual.
Error MessagesIf a problem occurs during printing, an error message will appear on the 
camera’s LCD monitor. Press  to stop printing. After fixing the problem, 
resume printing. For details on how to fix a printing problem, refer to the 
printer’s instruction manual.
Paper Error Check whether the paper is properly loaded in the printer.
Ink Error Check the printer’s ink level and the waste ink tank.
Hardware Error Check for any printer problems other than paper and ink problems.
File Error The selected image cannot be printed via PictBridge. Images taken with a 
different camera or images edited with a computer may not be printable.
COPY  
						

							249
You can set the print type, date imprinting, and file number imprinting. 
The print settings will be applied to all print-ordered images. (They 
cannot be set individually for each image.)
1Select [Print order].
 Under the [x 1] tab, select [Print 
order ], then press < 0>.
2Select [Set up].
  Select [ Set up], then press < 0>.
3Set the option as desired.
  Set the [ Print type ], [Date ], and [ File 
No. ].
  Select the option to be set, then press 
. Select the desired setting, then 
press < 0>.
W  Digital Print Order Format (DPOF)
Setting the Printing Options
[Print type ][ Date][ File No.]
COPY  
						

							W Digital Print Order Format (DPOF)
250
4Exit the setting.
  Press the < 7> button.
X The print order screen will reappear.
  Next, select [Sel.Image], [ Byn ], or 
[All image ] to order the images to be 
printed.
Print type
KStandard Prints one image on one sheet.
LIndexMultiple thumbnail images are printed on  one sheet.
K
LBothPrints both the standard and index prints.
Date On
[On ] imprints the recorded date on the print.
Off
File numberOn[On ] imprints the file number on the print.
Off
  Even if [Date ] and [File No. ] are set to [ On], the date or file number may 
not be imprinted depending on the print type setting and printer model.
  With [Index ] prints, the [ Date] and [ File No. ] cannot both be set to [ On] 
at the same time.
  When printing with DPOF, use the card whose print order specifications 
have been set. It will not work if you just extract images from the card 
and try to print them.
  Certain DPOF-compatible printers and  photofinishers may not be able to 
print the images as you specified. Refer to the printer’s instruction 
manual before printing, or check with your photofinisher about 
compatibility when ordering prints.
  Do not insert into the camera a card whose print order was set by a 
different camera and then try to specify a print order. The print order may 
be overwritten. Also, depending on the image type, the print order may 
not be possible.
RAW images and movies cannot be print ordered. You can print RAW 
images with PictBridge (p.240).
COPY