Canon Eos Rebel T5 1200 Instruction Manual

							211
Q Quick Control for Playback
To rotate an image, set [ 51: Auto rotate ] to [OnzD ]. If [ 51: Auto rotate ] 
is set to [ OnD] or [ Off], the [ b Rotate image ] setting will be recorded to 
the image, but the camera will not rotate the image for display.
  Pressing the < Q> button during the index display will switch to the 
single-image display and the Quick Control icons will appear. Pressing 
the < Q> button again will return to the index display.
  For images taken with another camera, the options you can select may 
be limited.
COPY  
						

							212
You can play back movies in the following three ways:An HDMI cable (sold separately) is 
necessary to connect the camera to a 
TV set. Also, an HDMI terminal on a 
TV set is required.
When the camera is connected to a TV 
set with an HDMI cable, you can play 
back movies and still photos on the TV 
set.
If you have a High-Definition TV set and 
connect your camera with an HDMI 
cable, you can watch Full High-Definition 
(Full HD: 1920x1080) and High-
Definition (HD: 1280x720) movies with 
higher image quality.
k  Enjoying Movies
Playback on a TV Set(p.222)
  The camera does not have an audio/video OUT terminal. Therefore, the 
camera cannot be connected to a TV set with an analog AV cable.
  Since hard disk recorders do not have an HDMI IN terminal, the camera 
cannot be connected to a hard disk recorder with an HDMI cable.
  Even if you connect the camera to a hard disk recorder with a USB 
cable, you cannot play or save movies and still photos.
  If the playback device is not compatible with MOV files, the movie cannot 
be played back.
COPY  
						

							213
k Enjoying Movies
You can play back movies on the 
camera’s LCD monitor. You can also edit 
out the movie’s first and last scenes, and 
play back the still photos and movies on 
the card in an automatic slide show.
The movie files recorded on the card can 
be transferred to a computer and played 
back with ImageBrowser EX (EOS 
software).
Playback on the Camera’s LCD Monitor(p.214-221)
Playback and Editing with a Computer(p.319)
A movie edited with a computer cannot be rewritten to the card and played 
back with the camera. However, video snapshot albums edited with EOS 
Video Snapshot Task (p.171) can be played on the camera.
 To have the movie play back smoothly on a computer, use a high-
performance computer. Regarding the computer hardware requirements 
for ImageBrowser EX, refer to the ImageBrowser EX User Guide (PDF).
  If you want to use commercially-availa ble software to play back or edit 
the movies, be sure it is compatib le with MOV files. For details on 
commercially-available software, contact the software manufacturer.
COPY  
						

							214
1Play back the image.
 Press the < x> button to display an 
image.
2Select a movie.
  Press the < Y> < Z> keys to select a 
movie.
  In the single-image display, the 
 icon displayed on the 
upper left of the screen indicates a 
movie. If the movie is a video 
snapshot, [ s] will be displayed.
  In the index display, perforations at 
the left edge of a thumbnail indicate a 
movie.  As movies cannot be played 
from the index display, press < 0> 
to switch to the single-image 
display.
3In the single-image display, press 
< 0>.
X The movie playback panel will appear 
at the bottom of the screen.
4Play back the movie.
  Select [ 7] (Play), then press < 0>.
X The movie will start playing.
  You can pause the movie playback by 
pressing < 0>.
  You can adjust the sound volume by 
turning the < 6> dial even during 
movie playback.
  For more details on the playback 
procedure, see the next page.
k  Playing Movies
Speaker
COPY  
						

							215
k Playing Movies
Movie Playback Panel
* When background music is set, the movie’s sound will not be played.
OperationPlayback Description
2 ExitReturns to the single-image display.
7 PlayPressing  toggles between play and stop.
8 Slow motionAdjust the slow motion speed by pressing the < Y> 
< Z > keys. The slow-motion speed is indicated at the 
upper right of the screen.
5  First frameDisplays the movie’s first frame.
3 Previous frameEach time you press , the previous frame is 
displayed. If you hold down , it will rewind the movie.
6 Next frameEach time you press , the movie will play frame-by-
frame. If you hold down , it will fast forward the movie.
4  Last frameDisplays the movie’s last frame.
X EditDisplays the editing screen (p.216).
 Background music*Plays back a movie with the selected background music 
(p.221).
Playback position
mm’ ss”Playback time (m inutes:seconds)
9 Vo l u m eYou can adjust the built-in speaker’s (p.214) volume by 
turning the  dial.
The camera may not be able to play back movies shot with another camera.
 With a fully-charged Battery Pack LP -E10, the continuous playback time 
at room temperature (23°C/73°F) will be as follows: Approx. 2 hr 20 min.
  During the single-image display, you can press the < B> button to 
change the display format (p.230).
  If you connect the camera to a TV set (p.222) to play back a movie, 
adjust the sound volume with the TV set. (Turning the < 6> dial will not 
change the sound volume.)
  If you took a still photo while you shot the movie, the still photo will be 
displayed for approx. 1 sec. during the movie playback.
COPY  
						

							216
You can edit out the first and last scenes of a movie in approx. 1-sec. increments.
1On the movie playback screen, 
select [X].
X The editing screen wi ll be displayed.
2Specify the part to be edited out.
 Select either [U] (Cut beginning) or 
[
V] (Cut end), then press < 0>.
  Press the < Y> < Z> keys to see 
another frame. Holding it down will 
fast forward the frames.
  After deciding which part to edit out, 
press < 0>. The portion highlighted 
in gray on the top of the screen is 
what will remain.
3Check the edited movie.
  Select [7] and press < 0> to play 
back the portion highlighted in gray.
  To change the editing, go back to step 
2.
  To cancel the editing, select [ 2], 
then press < 0>. Select [ OK] on the 
confirmation screen, then press 
< 0 >.
X Editing a Movie’s First and Last Scenes
COPY  
						

							217
X Editing a Movie’s First and Last Scenes
4Save the edited movie.
  Select [W], then press < 0>.
X The save screen will appear.
  To save it as a new movie, select 
[New file ]. To save it and overwrite 
the original movie file, select 
[Overwrite ], then press < 0>.
  On the confirmation screen, select 
[OK ], then press < 0> to save the 
edited movie and return to the movie 
playback screen.
  Since the editing is performed in ap prox. 1-sec. increments (position 
indicated by [ ] on the top of the screen), the actual position where the 
movie is edited may differ fr om the position you specified.
  If the card does not have enough free space, [ New file] will not be 
available.
  When the battery level is low, movie editing is not possible. Use a fully-
charged battery.
COPY  
						

							218
You can play back the images on the card as an automatic slide show.
1Select [Slide show].
 Under the [x 2] tab, select [Slide 
show ], then press < 0>.
2Select the images to be played.
  Press the < W> < X> keys to select 
the desired option, then press < 0>.
All images/Movies/Stills
  Press the < W> < X> keys to select 
one of the following: [
jAll images ], 
[
kMovies ], or [zStills ]. Then press 
< 0 >.
Date/Folder/Rating
  Press the < W> < X> keys to select 
one of the following: [iDate ], 
[
nFolder ], or [9 Rating].
  When < z
H> is highlighted, 
press the < B> button.
  Press the < W> < X> keys to select 
the option, then press < 0>.
3  Slide Show (Auto Playback)
Number of images to be played
[Date][ Folder][ Rating]
COPY  
						

							219
3 Slide Show (Auto Playback)
3Set [Set up] as desired.
 Press the < W> < X> keys to select 
[Set up ], then press < 0>.
  Set the [Display time], [ Repeat] 
(repeated playback), [ Transition 
effect ] (effect when changing 
images), and [Background music ] 
for the still photos.
  The background music selection 
procedure is explained on page 221.
  After selecting the settings, press the 
 button.
ItemPlayback Description
jAll imagesAll the still photos and movies  on the card will be played 
back.
i DateStill photos and movies taken on the selected shooting date 
will be played back.
n Folder Still photos and movies in the selected folder will be played 
back.
k
MoviesOnly the movies on the card will be played back.
zStillsOnly the still photos on  the card will be played back.
9 Rating Only the still photos and movi
es with the selected rating will 
be played back.
[Display time] [Repeat]
COPY  
						

							3 Slide Show (Auto Playback)
220
4Start the slide show.
 Press the < W> < X> keys to select 
[Start ], then press < 0>.
X After [ Loading image... ] is displayed, 
the slide show will start.
5Exit the slide show.
  To exit the slide show and return to 
the setting screen, press the < M> 
button.
[Transition effect][Background music ]
 To pause the slide show, press < 0>. During pause, [ G] will be displayed 
on the upper left of the image. Press < 0> again to resume the slide 
show.
  During auto playback, you can press the < B> button to change the 
still photo display format (p.80).
  During movie playback, you can adjust the sound volume by turning the 
 dial.
  During auto playback or pause, you can press the < Y> < Z> keys to 
view another image.
  During auto playback, auto power off will not work.
  The display time may vary depending on the image.
  To view the slide show on a TV set, see page 222.
COPY