Canon Eos Rebel T4i 650d Instruction Manual

271
U Creative Filters
5Save the image.
  Select [OK ] to save the image.
  Check the destination folder and 
image file number, then select [ OK].
  To apply a filter to another image, 
repeat steps 2 to 5.
  Press the  button to return to 
the menu.
  Grainy B/W
Makes the image grainy and black and white. By adjusting the 
contrast, you can change t he black-and-white effect.
  Soft focus
Gives the image a soft look. By adjusting the blur, you can change 
the degree of softness.
Creative Filter...

272
U Creative Filters
  Fish-eye effect
Gives the effect of a fish-eye l ens. The image will have a barrel-type 
distortion.
Depending on the level of this filt er effect, the area trimmed along 
the periphery of the ima ge changes. Also, since this filter effect will 
magnify the image center, the appar ent resolution at the center may 
degrade depending on the number of re corded pixels. Set the filter 
effect in step 4 while checking the resulting image.
  Art bold effect
Makes the photo look like an...

273
You can resize an image to make the pixel count lower and save it as a 
new image. Resizing an image is  possible only with JPEG 3/4 /a /b  
images. JPEG  c and RAW images cannot be resized.
1Select [Resize].
  Under the [ x1] tab, select [ Resize], 
then press < 0>.
X The images will be displayed.
2Select an image.
  Select the image you want to resize.
  By pressing the < Hy> button, you 
can switch to the index display and 
select an image.
3Select the desired image size.
  Press < 0> to display...

274
S Resize
Resize Options According to Original Image Size
The image size displayed in step 3 on the preceding page, such as 
[***M ****x**** ], has a 3:2 aspect ratio. The image size according to 
aspect ratios is shown in the table below.
The asterisked image-recording qualit y figures do not exactly match the 
aspect ratio. The image  will be cropped slightly.
Original Image 
SizeAvailable Resize Settings
4 abc
3 kkkk
4
kkk
a
kk
b
k
c
About Image Sizes
Image 
QualityAspect Ratio and Pixel Count...

275
Printing Images
 Printing  (p.276)
You can connect the camera directly to a printer and print 
out the images on the card. The  camera is compatible with 
“ w PictBridge” which is the standard for direct printing.
  Digital Print Order Format (DPOF)  (p.285)
DPOF (Digital Print Order Fo rmat) enables you to print 
images recorded on the card according to your printing 
instructions such as the image  selection, quantity to print, 
etc. You can print multiple images in one batch or give the 
print...

276
The direct printing procedure can be performed entirely with the 
camera while you look at the LCD monitor.
1Set the camera’s power switch to 
.
2Set up the printer.
 For details, see the printer’s 
instruction manual.
3Connect the camera to the 
printer.
 Use the interface cable provided with 
the camera.
  Connect the cable to the camera’s 
 terminal with the cable 
plug’s < D> icon facing the front of 
the camera.
  To connect to the printer, refer to the 
printer’s instruction manual.
4Turn on...

277
Preparing to Print
6Play back the image.
 Press the  button.
X The image will appear, and the < w> 
icon will appear on the upper left to 
indicate that the camera is connected 
to a printer.
wPictBridge
  Movies cannot be printed.
  The camera cannot be used  with printers compatible only with CP Direct 
or Bubble Jet Direct.
  Do not use any interface cable other than the  one provided.
  If there is a long beeping sound in st ep 5, it indicates a problem with the 
printer. Resolve the problem...

278
The screen display and setting options will differ depending on the 
printer.  Some settings may not be available. For details, refer to the 
printer’s instruction manual.
1Select the image to be printed.
 Check that the  icon is 
displayed on the upper left of the LCD 
monitor.
  Press the < U> key to select the 
image to be printed.
2Press .
X The print setting screen will appear.
3Select [Paper settings].
  Select [Paper settings ], then press 
< 0 >.
X The paper settings screen will 
appear.
w...

279
wPrinting
 Select the size of the paper loaded in 
the printer, then press < 0>.
X The paper type screen will appear.
  Select the type of the paper loaded in 
the printer, then press < 0>.
X The page layout screen will appear.
  Select the page layout, then press 
.
X The print settings screen will 
reappear.
*1:From the Exif data, the came ra name, lens name, shooting mode, shutter speed, aperture, 
exposure compensation  amount, ISO speed, whit e balance, etc., will be imprinted.
*2: After...

wPrinting
280
4Set the printing effects (image 
optimization).
 Set them if necessary. If you do not 
need to set any printing effects, go to 
step 5.
  What is displayed on the screen 
differs depending on the printer.
  Select the option, then press < 0>.
  Select the desired printing effect, then 
press < 0>.
  If the < e> icon is displayed brightly 
next to < z>, you can also adjust 
the printing effect (p.282).
* When you change the printing effects, changes are reflected in the image 
displayed on...