Canon Eos Rebel T4i 650d Instruction Manual

261
Viewing the Images on TV
1Connect the stereo AV cable AVC-
DC400ST (sold separately) to the 
camera.
 With the plug’s < Canon> logo facing 
the back of the camera, insert it into 
the < q
                   > terminal.
2Connect the AV cable to the TV 
set.
 Connect the AV cable to the TV’s 
video IN terminal and audio IN 
terminal.
3Turn on the TV and switch the 
TV’s video input to select the 
connected port.
4Set the camera’s power switch to 
.
5Press the < x> button.
XThe image will appear on the...

262
Protecting an image prevents it from being erased accidentally.
1Select [Protect images].
 Under the [ x1] tab, select [ Protect 
images ], then press < 0>.
X The protect setting screen will 
appear.
2Select [Select images].
  Select [Select images ], then press 
< 0 >.
X The images will be displayed.
3Protect the image.
  Press the < U> key to select the 
image to be protected, then press 
< 0 >.
X When an image is protected, the 
 icon will appear on the top of 
the screen.
  To cancel the image...

263
K Protecting Images
You can protect all the images in a  folder or on a card at one time.
When you select [ All images in folder ] 
or [ All images on card ] in [x1: Protect 
images ], all the images in the folder or 
on the card will be protected.
To cancel the image protection, select 
[Unprotect all images in folder ] or 
[Unprotect all images on card ].
3 Protecting All Images in  a Folder or on a Card
If you format the card (p.48), the protected images will also be erased.
 Movies can also be...

264
You can either select and erase images one by one or erase them in 
one batch. Protected images (p.262) will not be erased. Once an image is erased, it cannot be recovered. Make sure 
you no longer need the image before erasing it. To prevent 
important images from being erased accidentally, protect 
them. Erasing a 1 +73  image will erase both the RAW and 
JPEG images.
1Play back the image to be erased.
2Press the < L> button.
XThe Erase menu will appear at the 
bottom of the screen.
3Erase the...

265
L Erasing Images
2Select [Select and erase images].
  Select [Select and erase images ], 
then press < 0>.
X The images will be displayed.
  To display the three-image display, 
press the < Hy> button. To return to 
the single-image display, press the 
< u > button.
3Select the images to be erased.
  Press the < U> key to select the 
image to be erased, then press 
< 0 >.
X A checkmark < X> will be displayed 
on the upper left of the screen.
  To select other images to be erased, 
repeat step 3....

266
* With 1+73  images, the  1 file size is displayed.
* For still photos taken during movie shooting, < G> will be displayed.
* If a Creative filter or Resize has been applied to the image, the < 1+> icon will 
change to < u>.
* Photos taken with flash without any  flash exposure compensation are marked 
with the < > icon. Photos taken with fl ash exposure compensation are marked 
with the < y> icon.
B : Shooting Information Display
Sample Image Taken in a Creative Zone Mode
Flash exposure...

267
B: Shooting Information Display
* With images taken in a  Basic Zone mode, the inform ation displayed will differ 
depending on the  shooting mode.
* Photos taken in the < C> mode will show [ Background blur].
* If manual exposure was used, the sh utter speed, aperture, and ISO speed 
(when set manually) will be displayed.
* The < > icon will be disp layed for video snapshots.
Sample Image Taken in a Basic Zone Mode
Sample Movie
Ambience and 
ambience effects
Lighting or sceneShooting mode
Shooting...

268
B: Shooting Information Display
 About the Highlight Alert
When the shooting information is disp layed, any overexposed areas of the 
image will blink. To obtain more image  detail in the overexposed areas, set 
the exposure compensation to a neg ative amount and shoot again.
 About the HistogramThe brightness histogram shows the expo sure level distribution and overall 
brightness. The RGB histogr am is for checking the color saturation and 
gradation. The display  can be switched with 
[x2:...

269
Post-ProcessingImages
After shooting, you can apply Creative filters or resize 
the images (downsize the pixel count).
 The camera may not be  able to process images taken with 
another camera.
  Post-processing images as described in this chapter cannot be 
performed while the camera is  connected to a personal 
computer via the < C> terminal.
COPY  

270
You can apply the following Creative filters to an image and save it as a 
new image: Grainy B/W, Soft focus, Fish-eye effect, Art bold effect, 
Water painting effect, Toy camera effect, and Miniature effect.
1Select [Creative filters].
  Under the [x 1] tab, select [ Creative 
filters ], then press < 0>.
X The images will be displayed.
2Select an image.
  Select the image you want to apply a 
filter to.
  By pressing the < Hy> button, you 
can switch to the  index display and 
select an image....