Canon Eos Rebel T4i 650d Instruction Manual
Here you can view all the pages of manual Canon Eos Rebel T4i 650d Instruction Manual. The Canon manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 211
211 Handy Features Shooting SettingsCamera Settings AF operationOne-Shot AFAuto power off30 sec.AF point selectionAutomatic selectionBeepEnableDrive mode u (Single shooting)Release shutter without cardEnableMetering modeq (Evaluative metering)ISO speedAUTO (Auto)Image review2 sec.ISO Auto Maximum 6400Histogram displayBrightnessExposure compensation/AEBCanceledImage jump with 6e (10 images)Auto rotateOn z DBuilt-in flash settings Normal firingLCD brightnessFlash exposure compensation0 (Zero)LCD auto...
Page 212
212 Handy Features Live View ShootingMovie Shooting Live View shootingEnableAF methodu+TrackingAF methodu+TrackingMovie Servo AFEnableContinuous AF EnableAF with shutter button during kONE SHOTTouch ShutterDisableGrid displayOffAspect ratio 3:2Grid display OffMetering timer16 sec.Metering timer16 sec.Movie recording size1920x1080Sound recordingAutoVideo snapshotDisable COPY
Page 213
213 Handy Features You can prevent the display-off sensor from turning off the shooting setting display on the LCD moni tor when your eye approaches the viewfinder. Under the [52] tab, select [LCD auto off], then press < 0>. Select [Disable], then press < 0>. You can change the backgr ound color of the shooting settings screen. Under the [ 53] tab, select [Screen color ], then press < 0>. Select the desired color, then press < 0>. When you exit the menu, the selected color will be displayed for...
Page 214
214 The built-in flash and external Speedlite settings can be set with the camera’s menu. You can use the camera’s menu to set the external Speedlite function settings only if an EX-series Speedlite compatible with this function is attached. The setting procedure is the same as when setting a camera menu function. Select [Flash control]. Under the [ z1] tab, select [ Flash control ], then press < 0>. X The flash control screen will appear. Normally, set this to [Enable ]. If [Disable] is set,...
Page 215
215 3 Setting the FlashN You can set the flash-sync speed for flash photography in the aperture-priority AE (f) mode. : Auto The flash sync speed is set automatically within a range of 1/200 sec. to 30 sec. to suit the sc ene’s brightness. High-speed sync is also possible. : 1/200-1/60 sec. auto Prevents a slow shutter speed from being set in low-light conditions. It is effective for preventing subject blur and camera shake. However, while the subject will be properly exposed with the flash,...
Page 216
216 3 Setting the Flash N You can set the functions in the tabl e below. The functions displayed under [External flash func. setting] will vary depending on the Speedlite model. Select [Built-in flash settings ] or [External flash func. setting ]. X The flash functions will be displayed. With [ Built-in flash settings ], the highlighted functions can be selected and set. [Built-in flash settings] and [Exter nal flash func. settings] Functions *For [FEB] (Flash exposure bracketing) and [ Zoom],...
Page 217
217 3 Setting the FlashN Shutter synchronization Normally, set this to [ 1st curtain] so that the flash fires immediately after the exposure starts. If [ 2nd curtain ] is set, the flash will fire right before the shutter closes. When this is combined with a slow shutter speed, you can create a trail of light such as from car headlights at night. With E-TTL II (auto flash exposure), two flas hes will be fired: Once when you press the shutter button complete ly, and once immediately before the...
Page 218
218 3 Setting the Flash N The Custom Functions displayed under [ External flash C.Fn setting] will vary depending on the Speedlite model. 1Display the Custom Function. With the camera ready to shoot with an external Speedlite, select [External flash C.Fn setting ], then press < 0>. 2Set the Custom Function. Press the < U> key to select the function number, then set the function. The procedure is the same as setting the camera’s Custom Functions (p.292). 1Select [Clear settings]. Under the [...
Page 219
219 Whenever you set the power switch to or < 2>, the Self Cleaning Sensor Unit operates to automatically shake off the dust on the front of the sensor. Normally, you need not pay attention to this operation. However, you can choose to perform sensor cleaning at any time, or disable it. 1Select [Sensor cleaning]. Under the [ 53] tab, select [Sensor cleaning], then press < 0>. 2Select [Clean nowf]. Select [Clean now f], then press < 0 >. Select [OK ] on the dialog screen, then press < 0>. X...
Page 220
220 Normally, the Self Cleaning Sensor Unit will eliminate most of the dust that may be visible on captured images . However, in case visible dust still remains, you can append the Du st Delete Data to the image for erasing the dust spots later. The Du st Delete Data is used by Digital Photo Professional (provided softwa re, p.350) to erase the dust spots automatically. Prepare a solid white object such as a sheet of paper. Set the lens focal length to 50 mm or longer. Set the lens focus mode...