Canon Eos Rebel T4i 650d Instruction Manual
Here you can view all the pages of manual Canon Eos Rebel T4i 650d Instruction Manual. The Canon manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 231
![Page 231
231
Custom Wireless Flash Shooting
Multiple Speedlite slave units can be treated as one flash unit or
separated into slave groups whose flash ratio can be set.
The basic settings are shown below. By changing the [Firing group]
setting, you can shoot with various wir eless flash setups with multiple
Speedlites.
Basic settings:
Flash mode : E-TTL II
E-TTL II meter. : Evaluative
Wireless func. : 0
Channel : (Same as slave units)
[ 1 All] Using multiple slave Speedlites as one flash unit
This is...](http://img.usermanuals.tech/thumb/14/58889/w300_eos-rebel-t4i-650d-instruction-manual-230.png "Page 231
231
Custom Wireless Flash Shooting
Multiple Speedlite slave units can be treated as one flash unit or
separated into slave groups whose flash ratio can be set.
The basic settings are shown below. By changing the [Firing group]
setting, you can shoot with various wir eless flash setups with multiple
Speedlites.
Basic settings:
Flash mode : E-TTL II
E-TTL II meter. : Evaluative
Wireless func. : 0
Channel : (Same as slave units)
[ 1 All] Using multiple slave Speedlites as one flash unit
This is...")
231 Custom Wireless Flash Shooting Multiple Speedlite slave units can be treated as one flash unit or separated into slave groups whose flash ratio can be set. The basic settings are shown below. By changing the [Firing group] setting, you can shoot with various wir eless flash setups with multiple Speedlites. Basic settings: Flash mode : E-TTL II E-TTL II meter. : Evaluative Wireless func. : 0 Channel : (Same as slave units) [ 1 All] Using multiple slave Speedlites as one flash unit This is...
Page 232
![Page 232
232
Custom Wireless Flash Shooting
[1 (A:B)] Multiple slave units in multiple groups
Divide the slave units into groups A and
B and change the flash ratio to obtain
the desired lighting effect.
Refer to your Speedlite’s instruction
manual to set one slave unit’s slave ID
to A (Group A) and the other slave unit’s
ID to B (Group B) and position them as
shown in the illustration.
1Select [Wireless func.].
Follow step 2 on page 230 to select
[0 ], then press < 0>.
2Set [Firing group] to [1 (A:B)]....](http://img.usermanuals.tech/thumb/14/58889/w300_eos-rebel-t4i-650d-instruction-manual-231.png "Page 232
232
Custom Wireless Flash Shooting
[1 (A:B)] Multiple slave units in multiple groups
Divide the slave units into groups A and
B and change the flash ratio to obtain
the desired lighting effect.
Refer to your Speedlite’s instruction
manual to set one slave unit’s slave ID
to A (Group A) and the other slave unit’s
ID to B (Group B) and position them as
shown in the illustration.
1Select [Wireless func.].
Follow step 2 on page 230 to select
[0 ], then press < 0>.
2Set [Firing group] to [1 (A:B)]....")
232 Custom Wireless Flash Shooting [1 (A:B)] Multiple slave units in multiple groups Divide the slave units into groups A and B and change the flash ratio to obtain the desired lighting effect. Refer to your Speedlite’s instruction manual to set one slave unit’s slave ID to A (Group A) and the other slave unit’s ID to B (Group B) and position them as shown in the illustration. 1Select [Wireless func.]. Follow step 2 on page 230 to select [0 ], then press < 0>. 2Set [Firing group] to [1 (A:B)]....
Page 233
![Page 233
233
Custom Wireless Flash Shooting
The built-in flash can also be added to wireless flash shooting explained
on pages 231-232.
The basic settings are shown below. By changing the [ Firing group]
setting, you can shoot with various wireless flash setups of multiple
Speedlites complemented with the built-in flash.
1Basic settings:
Flash mode : E-TTL II
E-TTL II meter. : Evaluative
Wireless func. : [ 0+3 ]
Channel : (Same as slave units)
2Select [Firing group].
Select the firing group, then set the...](http://img.usermanuals.tech/thumb/14/58889/w300_eos-rebel-t4i-650d-instruction-manual-232.png "Page 233
233
Custom Wireless Flash Shooting
The built-in flash can also be added to wireless flash shooting explained
on pages 231-232.
The basic settings are shown below. By changing the [ Firing group]
setting, you can shoot with various wireless flash setups of multiple
Speedlites complemented with the built-in flash.
1Basic settings:
Flash mode : E-TTL II
E-TTL II meter. : Evaluative
Wireless func. : [ 0+3 ]
Channel : (Same as slave units)
2Select [Firing group].
Select the firing group, then set the...")
233 Custom Wireless Flash Shooting The built-in flash can also be added to wireless flash shooting explained on pages 231-232. The basic settings are shown below. By changing the [ Firing group] setting, you can shoot with various wireless flash setups of multiple Speedlites complemented with the built-in flash. 1Basic settings: Flash mode : E-TTL II E-TTL II meter. : Evaluative Wireless func. : [ 0+3 ] Channel : (Same as slave units) 2Select [Firing group]. Select the firing group, then set the...
Page 234
![Page 234
234
When [Flash mode] is set to [E-TTL II], flash exposure compensation
can be set. The flash exposure compensation settings (see below)
which can be set will differ depending on the [ Wireless func.] and
[Firing group ] settings.
[Flash exp. comp.]
The flash exposure compensation is
applied to the built-in flash and all
external Speedlites.
[2 exp. comp.]
The flash exposure compensation is
applied to the built-in flash.
[1 exp. comp.]
The flash exposure compensation is
applied to all...](http://img.usermanuals.tech/thumb/14/58889/w300_eos-rebel-t4i-650d-instruction-manual-233.png "Page 234
234
When [Flash mode] is set to [E-TTL II], flash exposure compensation
can be set. The flash exposure compensation settings (see below)
which can be set will differ depending on the [ Wireless func.] and
[Firing group ] settings.
[Flash exp. comp.]
The flash exposure compensation is
applied to the built-in flash and all
external Speedlites.
[2 exp. comp.]
The flash exposure compensation is
applied to the built-in flash.
[1 exp. comp.]
The flash exposure compensation is
applied to all...")
234 When [Flash mode] is set to [E-TTL II], flash exposure compensation can be set. The flash exposure compensation settings (see below) which can be set will differ depending on the [ Wireless func.] and [Firing group ] settings. [Flash exp. comp.] The flash exposure compensation is applied to the built-in flash and all external Speedlites. [2 exp. comp.] The flash exposure compensation is applied to the built-in flash. [1 exp. comp.] The flash exposure compensation is applied to all...
Page 235
![Page 235
235
Other Settings
When [Flash mode] is set to [Manual flash ], flash exposure
compensation can be set. The flash output settings ([ 1 flash output ],
[Group A output ], etc.) that can be set will differ depending on the
[Wireless func.] setting (see below).
[Wireless func.0 ]
[Firing group: 1All]: The manual
flash output setting will be applied to
all the external Speedlites.
[Firing group: 1 (A:B) ]: You can set
the flash output separately for slave
groups A and B.
[Wireless func.0 +3]...](http://img.usermanuals.tech/thumb/14/58889/w300_eos-rebel-t4i-650d-instruction-manual-234.png "Page 235
235
Other Settings
When [Flash mode] is set to [Manual flash ], flash exposure
compensation can be set. The flash output settings ([ 1 flash output ],
[Group A output ], etc.) that can be set will differ depending on the
[Wireless func.] setting (see below).
[Wireless func.0 ]
[Firing group: 1All]: The manual
flash output setting will be applied to
all the external Speedlites.
[Firing group: 1 (A:B) ]: You can set
the flash output separately for slave
groups A and B.
[Wireless func.0 +3]...")
235 Other Settings When [Flash mode] is set to [Manual flash ], flash exposure compensation can be set. The flash output settings ([ 1 flash output ], [Group A output ], etc.) that can be set will differ depending on the [Wireless func.] setting (see below). [Wireless func.0 ] [Firing group: 1All]: The manual flash output setting will be applied to all the external Speedlites. [Firing group: 1 (A:B) ]: You can set the flash output separately for slave groups A and B. [Wireless func.0 +3]...
Page 236
236 COPY
Page 237
237 Image Playback This chapter explains functions related to viewing photos and movies, with more detail than in Chapter 2 “Basic Shooting and Image Playback”. Here you will find explanations of how to play back and erase photos and movies with the camera and view them on a TV set. About images shot and saved with another deviceThe camera may not be able to properly display images captured with a different camera, edited wi th a computer, or had their file names changed. COPY
Page 238
238 Search for images quickly with the index display showing four or nine images on one screen. 1Play back the image. When you press the < x> button, the last image captured will be displayed. 2Switch to the index display. Press the < Hy> button. X The 4-image index display will appear. The currently-selected image will be highlighted in a blue frame. Press the < Hy> button again to switch to the 9-image index display. Pressing the < u> button will switch the display from 9 images to 4 images...
Page 239
![Page 239
239
x Searching for Images Quickly
With the single-image display, you can turn the dial to jump through the images forward or backward a ccording to the jump method set.
1Select [Image jump w/6].
Under the [ x2] tab, select [ Image
jump w/ 6], then press < 0>.
2Select the jump method.
Press the < S> key to select the
jump method, then press < 0>.
d :Display images one by one
e :Jump 10 images
f :Jump 100 images
g :Display by date
h :Display by folder
i :Display movies only
j :Display stills only
k...](http://img.usermanuals.tech/thumb/14/58889/w300_eos-rebel-t4i-650d-instruction-manual-238.png "Page 239
239
x Searching for Images Quickly
With the single-image display, you can turn the dial to jump through the images forward or backward a ccording to the jump method set.
1Select [Image jump w/6].
Under the [ x2] tab, select [ Image
jump w/ 6], then press < 0>.
2Select the jump method.
Press the < S> key to select the
jump method, then press < 0>.
d :Display images one by one
e :Jump 10 images
f :Jump 100 images
g :Display by date
h :Display by folder
i :Display movies only
j :Display stills only
k...")
239 x Searching for Images Quickly With the single-image display, you can turn the dial to jump through the images forward or backward a ccording to the jump method set. 1Select [Image jump w/6]. Under the [ x2] tab, select [ Image jump w/ 6], then press < 0>. 2Select the jump method. Press the < S> key to select the jump method, then press < 0>. d :Display images one by one e :Jump 10 images f :Jump 100 images g :Display by date h :Display by folder i :Display movies only j :Display stills only k...
Page 240
240 You can magnify a captured image by approx. 1.5x to 10x on the LCD monitor. 1Magnify the image. Press the < u> button during image playback. X The image will be magnified. If you hold down the < u> button, the image will be magnified until it reaches the maximum magnification. Press the < Hy> button to reduce the magnification. If you hold down the button, the magnification will be reduced to the single-image display. 2Scroll around the image. Use the < S> key to scroll around the...