Canon Eos Rebel T4i 650d Instruction Manual
Here you can view all the pages of manual Canon Eos Rebel T4i 650d Instruction Manual. The Canon manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 291
291 Customizing theCamera You can customize various ca mera functions to suit your picture-taking preferen ces with Custom Functions. Custom Functions can be set an d used only in Creative Zone modes. Creative Zone COPY
Page 292
292 1Select [Custom Functions (C.Fn)]. Under the [ 54] tab, select [Custom Functions (C.Fn)], then press < 0>. 2Select the Custom Function number. Press the < U> key to select the Custom Function number, then press < 0 >. 3Change the setting as desired. Press the < V> key to select the setting (number), then press < 0>. Repeat steps 2 and 3 if you want to set another Custom Functions. At the bottom of the screen, the current Custom Function settings are indicated below the respective...
Page 293
293 3 Setting Custom Functions N * [5: ISO speed ] is settable only for ma nual exposure shooting. Custom Functions C.Fn I: ExposureA LV Shooting k Movie Shooting 1Exposure level incrementsp.294kk 2ISO expansionkIn a C.Fn II: Image 3Highlight tone priorityp.295kk C.Fn III: Autofocus/Drive 4AF-assist beam firingp.296k (With f *) 5 Mirror lockup * If you use an EX-series Sp eedlite (sold separately) equipped with an LED light, the LED light will turn on for AF-assist even in the c, o , and d...
Page 294
294 Custom Functions are organized into four groups based on the function type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Autofocus/Drive, C.Fn IV: Operation/Others. 3 Custom Function Settings N C.Fn I: Exposure C.Fn-1 Exposure level increments 0: 1/3-stop 1: 1/2-stop Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, flash exposure comp ensation, etc. This is effective when you prefer to control the exposure in less fine increments than 1/3- stop increments....
Page 295
295 3 Custom Function Settings N C.Fn II: Image C.Fn-3 Highlight tone priority 0: Disable 1: Enable Improves the highlight detail. The dynamic range is expanded from the standard 18% gray to br ight highlights. The gradation between the grays and highlights becomes smoother. With setting 1, the Auto Lighting Opti mizer (p.123) is automatically set to [ Disable ] and the setting cannot be changed. With setting 1, noise (g rainy image, banding, etc.) may become slightly more pronounced th an with...
Page 296
3 Custom Function Settings N 296 C.Fn III: Autofocus/Drive C.Fn-4 AF-assist beam firing The settings to specify whether or not the AF-assist beam is emitted by the camera’s built-in flash or by an ex ternal, EOS-dedicated Speedlite can be set. 0: Enable If necessary, the AF-assist beam will be emitted by the built-in flash or external Speedlite. 1: Disable The AF-assist beam is not emitted. 2: Enable external flash only If an external Speedlite is attached, it will emit the AF-assist beam when...
Page 297
297 3 Custom Function Settings N C.Fn IV: Operation/Others C.Fn-6 Shutter/AE lock button 0: AF/AE lock 1: AE lock/AF This is convenient when you want to focus and meter separately. Press the button to auto focus, and press the shutter button halfway to apply AE lock.2: AF/AF lock, no AE lock In the AI Servo AF operation, you can press the < A> button to stop the AF operation momentarily. This prevent s the AF from being thrown off by any obstacle passing between the came ra and subject. The exposure...
Page 298
3 Custom Function Settings N 298 C.Fn-7 Assign SET button You can assign a frequently-used function to < 0>. Press < 0> when the camera is ready to shoot. 0: Normal (disabled) 1: Image quality Press to display the image-recording quality setting screen on the LCD monitor. Select the desired image-recording quality, then press .2: Flash exposure compensation When you press < 0>, the flash exposure compensation setting screen will appear. Set the flash expos ure compensation, then press < 0>. 3: LCD...
Page 299
299 Under the My Menu tab, you can register up to six menu options and Custom Functions whose settings you change frequently. 1Select [My Menu settings]. Under the [ 9] tab, select [ My Menu settings ], then press < 0>. 2Select [Register to My Menu]. Select [Register to My Menu ], then press < 0>. 3Register the desired items. Select an item to register, then press . On the confirmation dialog, select [OK ] and press < 0> to register the item. You can register up to six items. To return...