Canon Eos Rebel T4i 650d Instruction Manual

301
Reference
This chapter provides reference information for camera 
features, system accessories, etc.
Certification LogoUnder the [ 54] tab, if you select [ Certification Logo Display ] 
and press < 0>, some of the logos of th e camera’s certifications 
will appear. Other certificatio n logos can be found in this 
Instruction Manual, on the came ra body, and on the camera’s 
package.
COPY  

302
With AC Adapter Kit ACK-E8 (sold separately), you can connect the 
camera to a household power outle t and not worry about the remaining 
battery level.
1Connect the power cord.
 Connect the power cord as shown in 
the illustration.
  After using the camera, unplug the 
power plug from the power outlet.
2Connect the DC Coupler.
 Connect the cord’s plug to the DC 
Coupler.
3Insert the DC Coupler.
 Open the cover and insert the DC 
Coupler until it locks in place.
4Push in the DC cord.
 Open the DC...

303
This remote controller enables you to take pictures wirelessly up to 
approx. 5 meters/16.4 feet from th e camera. You can either shoot 
immediately or use a 2-sec. delay.
  Set the self-timer to < Q> (p.103).
  Point the remote controller toward the camera’s remote control 
sensor and press the transmit button.
X The camera will autofocus.
X When focus is achieved, the self -timer lamp will light up and the 
picture will be taken.
Remote Control Shooting
Remote Controller RC-6 (Sold Separately)...

Remote Control Shooting
304
Remote Switch RS-60E3 (sold separately) comes with an approx. 
60 cm/2.0 ft cord. When connected to the camera’s remote control 
terminal, it can be pressed halfway and completely, just like the shutter 
button.
When you use the self-timer, bulb, or Remote Switch and do not look 
through the viewfinder, stray light entering the viewfinder can cause the 
image to look dark. To prevent this, use the eyepiece cover (p.27) 
attached to the camera strap.
During Live View shooting...

305
Basically operates like a built-in flash for easy operation.
When an EX-series Speedlite (sold separately) is attached to the 
camera, almost all the autoflash control is done by the camera. In other 
words, it is like a high-output flash  attached externally in place of the 
built-in flash.
For detailed instructions, refe r to the EX-series Speedlite’s 
instruction manual.  This camera is a Type-A camera that can use all 
the features of EX-series Speedlites.
External Speedlites
EOS-dedicated,...

External Speedlites
306
 With an EZ/E/EG/ML/TL-series Speedlite set in TTL or A-TTL 
autoflash mode, the flash can be  fired at full output only. 
Set the camera’s shooting mode to < a> (manual exposure) or 
< f > (aperture-priority AE) and adjust the aperture setting before 
shooting.
  When using a Speedlite that has manual flash mode, shoot in the 
manual flash mode.
Sync Speed
The camera can synchronize with co mpact, non-Canon flash units at 
1/200 sec. or slower shutter s peeds. Use a sync speed...

307
With a commercially-available Eye-Fi card already set up, you can 
automatically transfer captured images to a personal computer or 
upload them to an online service via a wireless LAN.
The image transfer is a function of the Eye-Fi card. For instructions on\
 
how to set up and use the Eye-Fi card or to troubleshoot any image 
transfer problems, refer to the Eye-Fi card’s instruction manual or 
contact the card’s manufacturer.
The camera is not guaranteed to  support Eye-Fi card functions...

Using Eye-Fi Cards
308
5Check the [Access point SSID:].
 Check that an access point is 
displayed for [ Access point SSID: ].
  You can also check the Eye-Fi card’s 
MAC address and firmware version.
  Press the < M> button three times 
to exit the menu.
6Take the picture.
X The picture is transferred and the 
 icon switches from gray (not 
connected) to one of the icons below.
  For transferred images,  O is 
displayed in the shooting information 
display (p.266).
H(Gray)  Not connected : No connection...

309
Using Eye-Fi Cards
Cautions for Using Eye-Fi Cards If “J ” is displayed, an error occu rred while retrieving the card 
information. Turn the camera’s  power switch off and on again.
  Even if [Eye-Fi trans. ] is set to [Disable], it may still transmit a signal. In 
hospitals, airports, and other places  where wireless transmissions are 
prohibited, remove the Eye-Fi card from the camera.
  If the image transfer  does not function, chec k the Eye-Fi card and 
personal computer settings. For deta ils,...

310
o: Set automatically   k: User selectable    :  Not selectable/Disabled
*1: The  z icon indicates still photo shooti ng in the movie shooting mode.
*2:  1 +73  or 1  cannot be selected.
*3: Settable only fo r manual exposures.
*4: Set automatically in Basic Zone modes.
*5: Settable only in  Creative Zone modes.
Function Availability Table According to Shooting Mode
Mode DialBasic ZoneCreative ZoneMovie
A7C23456FGdsfakz*1
All image quality 
settings selectablekkkkkkkkk*2k*2kkkkk
ISO...