Canon EOS 5D Mk.4 Manual

429
You can play back the images on the card as an automatic slide show.
1Select [Slide show].
 Under the [ 32] tab, select [ Slide 
show ], then press < 0>.
2Select the images to be played 
back.
  Select the desired option on the 
screen, then press < 0>.
All images/Movies/Stills/Protect
  Turn the < 5> dial to select one of 
the following: [ jAll images ] 
[ k Movies ] [z Stills ] [J Protect ]. 
Then press < 0>.
Date/Folder/Rating
  Turn the < 5> dial to select one of 
the following: [ iDate ] [...

3 Slide Show (Auto Playback)
430
3Set the playback as desired.
 Select [ Set up], then press < 0>.
  Set the [ Display time ] and [Repeat ] 
settings for still photos.
  After completing the settings, press 
the < M > button.
ItemPlayback Description
jAll imagesAll the still photos and movies  on the card will be played 
back.
i DateStill photos and movies taken on the selected shooting date 
will be played back.
n FolderStill photos and movies in the selected folder will be played 
back.
kMoviesOnly...

431
3 Slide Show (Auto Playback)
4Start the slide show.
 Select [ Start], then press < 0>.
X After [ Loading image... ] is displayed, 
the slide show will start.
5Exit the slide show.
  To exit the slide show and return to 
the setting screen, press the < M> 
button.
  To pause the slide show, press < 0>. During pause, [ G] will be 
displayed on the upper left of the image. Press < 0> again to resume 
the slide show.
  During the automatic playback of still images, you can press the < B> 
button to...

432
By connecting the camera to a TV set with an HDMI cable (sold separately), 
you can play back the camera’s still photos and movies on the TV set. For 
the HDMI cable, HDMI Cable HTC-100 (sold separately) is recommended.
If the picture does not appear on the TV screen, check if the [53: Video system] is correctly set to [For NTSC] or [For PAL] (depending on the 
video system of your TV set).
1Connect the HDMI cable to the 
camera.
 With the plug’s < dHDMI MINI > logo 
facing the front of the camera,...

433
Viewing Images on a TV Set
If the TV set connected to the camera with an HDMI cable is compatible 
with HDMI CEC*, you can use the TV set’s remote control for playback 
operations.
* An HDMI-standard function enabling HDMI devices to control each other so that you can control them with one remote control unit.
1 Select [Ctrl over HDMI].
  Under the [ 33] tab, select [ Ctrl over 
HDMI ], then press < 0>.
2Select [Enable].
3Connect the camera to a TV set.
  Use an HDMI cable to connect the 
camera to...

Viewing Images on a TV Set
434
4Press the camera’s  button.
XAn image will appear on the TV 
screen and you can use the TV set’s 
remote control for playback.
5Select an image.
  Point the remote control toward the 
TV set and press the  /  button to 
select an image.
6Press the remote control’s Enter 
button.
X The menu appears and you can 
perform the playback operations 
shown on the left.
  Press the remote control’s  /  
button to select the desired option, 
then press the Enter button. For a...

435
You can copy the images recorded on one card (save duplicates) to the 
other card.
1Select [Image copy].
  Under the [ 31] tab, select [ Image 
copy ], then press < 0>.
2Select [Sel.Image].
  Check the copy source card’s 
number, the target card’s number and 
its remaining capacity.
  Select [ Sel.Image ], then press < 0>.
a Copying Images
3  Copying a Single Image
Movie Files Exceeding 4 GB
 If you are copying images between cards and the copy target card is 
formatted in FAT32 (p.74), movie files...

a Copying Images
436
3Select the folder.
  Select the folder containing the image 
you want to copy, then press < 0>.
  Check the images displayed on the 
right to select the desired folder.
X The images in the selected folder will 
be displayed.
 4Select the images to be copied.
  Turn the < 5> dial to select an image 
to be copied, then press < 0>.
X The [ X] icon will appear on the upper 
left of the screen.
  If you press the < u> button and turn 
the < 6> dial counterclockwise, you 
can select an...

437
a Copying Images
7Select the target folder.
  Select the target folder to which you 
want to copy the images, then press 
.
  To create a new folder, select [ Create 
folder ].
8Select [OK].
 Check the information of the source 
card and target card, then select 
[OK ].
X The copying will start and the 
progress will be displayed.
  When the copying is completed, the 
result will be displayed. Select [ OK] to 
return to the screen in step 2.
You can copy all the images in a folder or on a card at...

a Copying Images
438
  If an image is being copied to a target folder/card which has an image 
with the same file number, the  following will be displayed: [Skip image 
and continue ] [Replace existing image ] [Cancel copy ]. Select the 
copying method, then press < 0>.
•[ Skip image and continue ]: Any images having the same file number 
will be skipped and not copied.
•[ Replace existing image ]: Any images having the same file number  
(including protected images) will be 
overwritten.
If an image...