Canon EOS 5D Mk.4 Manual

419
Q Quick Control for Playback
To rotate an image, set [ 51: Auto rotate ] to [OnzD ] (p.444). If [ 51: 
Auto rotate ] is set to [OnD] or [ Off], the [ b Rotate image ] setting will be 
recorded to the image, but the camera will not rotate the image for display.
  Pressing the < Q> button during the index display will switch to the 
single-image display, and the Quick Control screen will appear. Pressing 
the < Q> button again will return to the index display.
  For images taken with another camera,...

420
The three main ways to play back and enjoy movies are as follows:
By connecting the camera to a TV set 
with HDMI Cable HTC-100 (sold 
separately), you can play back the 
camera’s still photos and movies on the 
TV set.
You can play back movies on the 
camera’s LCD monitor.
You can also edit out the movie’s first 
and last scenes, select a desired frame 
from a 4K movie and save it as a still 
photo, and play back the still photos and 
movies on the card in an automatic slide 
show.
k  Enjoying...

421
k Enjoying Movies
The movie files recorded on the card can 
be transferred to a computer and played 
back or edited with pre-installed or 
general-purpose software compatible 
with the movie’s recording format.
Playback and Editing with a Computer
 To play back or edit a movie with commercially-available software, use 
software compatible with MOV-format and MP4-format movies. For 
details on commercially-available so ftware, contact the software 
manufacturer.
  MOV-format movies can also be pl...

422
1Play back the image.
 Press the < x> button to play back 
images.
2Select a movie.
  Turn the < 5> dial to select the 
movie to be played back.
  In the single-image display, the 
 icon displayed on the 
upper left indicates a movie.
  In the index display, perforations at 
the left edge of a thumbnail indicate a 
movie.  As movies cannot be played 
back from the index display, press 
< 0 > to switch to the single-image 
display.
3In the single-image display, press 
< 0 >.
XThe movie playback panel...

423
k Playing Back Movies
Movie Playback Panel
OperationPlayback Description
7 PlayPressing < 0> toggles between play and stop.
8 Slow motion
Adjusts the slow motion speed by turning the < 5> 
dial. The slow motion speed is indicated on the upper 
right of the screen.
5  First frameDisplays the movie’s first frame.
3  Previous frameDisplays the previous frame each time you press 
< 0 >. Holding down < 0> will rewind the movie.
6 Next framePlays the movie frame-by-frame each time you press 
< 0 >....

k Playing Back Movies
424 Ta p  [
7] at the center of the 
screen.
X The movie will start playing back.
  To display the movie playback panel, 
tap < s1 > on the upper left of the 
screen.
  To pause the movie while it is playing 
back, tap on the screen. The movie 
playback panel will also appear.
HD movies shot at a high frame ra te (119.9 fps or 100.0 fps) will be 
played back at 1/4-speed slow motion (29.97 fps or 25.00 fps). No 
sound will be played back because no  sound is recorded when shooting...

425
You can edit out the first and last scenes of a movie in approx. 1-sec. increments.
1On the movie playback screen, 
select [X].
X The movie editing panel will be 
displayed at the bottom of the screen.
2Specify the part to be edited out.
  Select either [ U] (Cut beginning) or 
[ V ] (Cut end), then press < 0>.
  Tilt < 9> to the left or right to see the 
previous or next frames. Holding 
down the key will fast forward or fast 
rewind the frames. Turn the < 5> dial 
for frame-by-frame playback....

X Editing a Movie’s First and Last Scenes
426
4Save the edited movie.
  Select [ W], then press < 0>.
X The save screen will appear.
  To save it as a new movie, select 
[New file ]. To save it and overwrite 
the original movie file, select 
[ Overwrite ], then press < 0>.
  On the confirmation dialog, select 
[OK ] to save the edited movie and 
return to the movie playback screen.
  Since the editing is performed in ap prox. 1-sec. increments (position 
indicated by [ ] on the top of the screen), the...

427
From a 4K movie, you can select any desired frame to save it as an 
approx. 8.8 megapixel (4096x2160) still photo (JPEG image). This 
function is called “Frame Grab (4K frame capture)”.
1Play back the image.
 Press the < 3> button to play back 
images.
2Select a 4K movie.
  Turn the < 5> dial and select a 4K 
quality movie.
  On the shooting information screen 
(p.401), the 4K movie is indicated 
with the [ H] icon.
  With the index display, press < 0> to 
switch to the single-image display.
3In the...

Grabbing a Frame from 4K Movies
428
6Save the frame.
 Select [ OK] to save the frame 
displayed on the screen as a still 
photo (JPEG image).
  Check the destination folder and 
image file number.
7Select the image to be displayed.
 Select [ View original movie ] or 
[ View extracted still image ].
X The selected image will be displayed.
  Frame grabbing is not possible with Full HD movies or 4K movies shot 
with a different camera.
  Frame grabbing is not possible if the camera is connected to a...