Canon EOS 5D Mk.4 Manual

379
z2
When the Live View shooting/Movie 
shooting switch is set to < k>, the 
settings for [ z2: ISO speed settings ] 
will be switched to [ ISO speed], [Range 
for movies ], and [Range for  H].
 ISO Speed Settings
 ISO speed
In the < a> mode, you can set the ISO speed manually. You can 
also select ISO Auto. You can also use the < i> button for these 
settings.
  Range for movies
For Full HD movie shooting and High Frame Rate (HD) movie 
shooting, you can set the automatic and manual ISO speed setting...

3 Menu Function Settings
380
z4
When the Live View shooting/Movie 
shooting switch is set to < k>, the [ z4] 
and [ z5] tabs will be displayed as the 
menu options exclusive to movie 
shooting (the [ z2] and [ z3] tabs in 
< A > mode).
 Movie Servo AF
With this function enabled, the camera focuses on the subject 
continuously during movie shootin g. The default setting is [Enable].
When [Enable] is set:
  The camera focuses on the subject continuously even when you 
are not pressing the shutter button...

381
3 Menu Function Settings
Cautions When [Movie Servo AF] is Set to [Enable]
 Shooting Conditions that Make Focusing Difficult
• A fast-moving subject approaching or moving away from the camera.
• A subject moving at a close distance in front of the camera.
• With a higher f/number
• Also see “Shooting Conditions that Make Focusing Difficult” on page 
324.
  Since this drives the lens continuo usly, it will consume battery power and 
shorten the movie shooting time (p.359).
  With certain lenses, the...

3 Menu Function Settings
382
 AF method
You can select [ u+Tracking ], [FlexiZone - Multi ], or [FlexiZone - 
Single ]. See page 316 for the AF method.
  Grid display
With [ 3x3 l] or [ 6x4 m], you can display grid lines to help you 
level the camera vertically or horizontally. Also, with [ 3x3+diag n], 
the grid is displayed together  with diagonal lines to help you 
compose with better balance by a ligning the intersections over the 
subject.
Note that the grid is not displayed during movie shooting....

383
3 Menu Function Settings
 Movie Servo AF Speed N
You can set the Movie Servo AF’s AF 
speed and its operation conditions.
This function is settable when [
Movie 
Servo AF] is set to [Enable] and [AF 
method] is set to [FlexiZone - Single].Additionally, the function is enabled 
when using a lens supporting slow focus 
transition during movie shooting*.
When active :[Always on ] sets the AF adjustment speed to take effect 
at all times for movie shooting (before and during movie 
shooting). [ During...

3 Menu Function Settings
384
 Movie Servo AF tracking sensitivity N
You can change the Movie Servo AF’s 
tracking sensitivity to one of seven 
levels. This affects the responsiveness of 
AF tracking sensitivity when the subject 
strays from the AF points, such as during 
panning or when an obstacle cuts across 
the AF points.
This function is settable when [
Movie Servo AF] is set to [Enable] and [AF 
method] is set to [FlexiZone - Single].
Locked on: -3/-2/-1
This setting makes the camera less incl...

385
3 Menu Function Settings
z5
  Metering timer N
You can change how long the exposure setting is displayed (AE lock 
time).
  Time code
You can set the time code. For details, see page 365. 

3 Menu Function Settings
386
 V  button function
You can set the functions performed by 
pressing the shutter button halfway or 
completely during movie shooting.
If [ / k] or [ q/k ] is set, besides pressing the < 0> button, 
you can start or stop the movie shooting by pressing the shutter 
button completely or by using Remote Switch RS-80N3 or Timer 
Remote Controller TC-80N3 (each sold separately, p.279).
  Time-lapse movie
You can shoot time-lapse movi es. For details, see page 371.
SettingPressing...

387
3 Menu Function Settings
 HDMI display
This function enables you to select the 
display option while recording HDMI 
video output with an external recording 
device. The movie will be output in Full 
HD quality (1920x1080). The default 
setting is [a].
 When [ a] is set:
• When outputting a movie via HDMI, the camera’s LCD monitor 
will be off.
• The shooting information, AF points, etc., will be displayed on 
the HDMI video output. However, if you press the < B> 
button while watching the exter nal...

3 Menu Function Settings
388
To continue the HDMI output for longer than 30 min., select [ a] or 
[ a without info ], then set [52: Auto Power Off ] to [Disable ] (p.76).
How to prolong the HDMI output
 HDMI output in 4K quality is not possible. (Even if [ Movie rec. size] is set 
to  H , the movie will be output in Full HD quality.)
  HDMI output with no information will not display the card’s remaining 
capacity, battery level, internal temperature warning (p.391), or other 
warnings on the HDMI...