Canon EOS 5D Mk.4 Manual

399
B: Shooting Information Display
Histogram display
(Brightness)
Lens name
Focal lengthHistogram display
(RGB)
• Lens / Histogram information
• White balance information
•  Picture Style information 1
• Picture Style information 2
Frame-grab images from 4K movies saved as still photos (p.427) will not 
display certain shooting information screens. 

B: Shooting Information Display
400
• Color space / 
Noise reduction information
• Lens aberration 
correction information 1 •
Lens aberration 
correction information 2
Latitude
Elevation
Longitude
UTC (Coordinated Universal Time)
• GPS information •
IPTC information
If the GPS information is not recorded or the IPTC information is not 
appended to the image, the GPS information screen or IPTC information 
screen will not be displayed. 

401
B: Shooting Information Display
•: Shutter speed, aperture, and ISO speed are not displayed.
• < / >: Aperture and ISO speed are not displayed.
• < / >: Shutter speed and ISO speed are not displayed.
• < / > + ISO Auto: ISO speed is not displayed.
  Highlight Alert
When [ 33: Highlight alert ] is set to [Enable], overexposed, 
clipped highlights will blink. To obtain more detailed gradation in the 
blinking areas where you want t he gradation to be faithfully 
reproduced, set the exposure...

B: Shooting Information Display
402
 AF Point Display
When [ 33: AF point disp. ] is set to [Enable], the AF point that 
achieved focus will be displayed in red. If automatic AF point 
selection is set, multiple AF points may be displayed.
  Histogram
The brightness histogram shows the exposure level distribution and 
overall brightness. The RGB hist ogram is for checking the color 
saturation and gradation. The display can be switched with [ 33: 
Histogram disp ].
•[Brightness] DisplayThis histogram is...

403
Search for images quickly with the index display showing 4, 9, 36, or 
100 images on one screen.
1Press the  button.
  During image playback or when the 
camera is ready to shoot, press the 
 button.
X [6 u] will be displayed on the lower 
right of the screen.
2Switch to the index display.
 Turn the  dial counterclockwise.
X The 4-image index display will 
appear. The selected image is 
highlighted with an orange frame.
  Turning the < 6> dial further 
counterclockwise will switch the 
display from...

x Searching for Images Quickly
404
In the single-image display, you can turn the  dial to jump through 
the images forward or backward according to the jump method set.
1Select [Image jump w/ 6].
 Under the [ 32] tab, select [ Image 
jump w/ 6], then press < 0>.
2Select the jump method.
  Select the jump method, then press 
.
d:Display images one by one
e: Jump 10 images
f:Jump 100 images
g: Display by date
h: Display by folder
i:Display movies only
j:Display stills only
P: Display protected images...

405
x Searching for Images Quickly
3Browse by jumping.
 Press the < x> button to play back 
images.
  In the single-image display, turn the 
 dial.
X You can browse by the method that 
was set.
Playback position
Jump method
 
To search images by shooting date, select [ Date].
  To search images by folder, select [ Folder].
  If the card contains both movies and still photos, select [ Movies] or 
[ Stills ] to display one or the other.
  If the jump method is set to [ Protect] or [Rating ] but no images...

406
You can magnify a captured image by approx. 1.5x to 10x on the LCD monitor.
1Magnify the image.
 The image can be magnified as 
follows: 1. During image playback 
(single-image display), 2. During the 
image review after image capture, 
and 3. From the shooting-ready state.
  Press the < u> button.
X The magnified view will appear. The 
magnified area and [ 6u] will be 
displayed on the lower right of the 
screen.
  The image magnification increases 
as you turn the < 6> dial clockwise. 
You can...

407
u Magnifying Images
Under the [ 33] tab, when you select 
[ Magnificatn (apx) ], you can set the 
initial magnification  ratio and position for 
the magnified view.
  1x (no magnification)
The image is not magnified. The magnified view will start with the 
single-image display.
  2x, 4x, 8x, 10x (magnify from center)
The magnified view starts at the image center at the selected 
magnification.
  Actual size (from selected point)
The recorded image’s pixels will  be displayed at approx. 100%. The...

408
You can compare two images side by side on the LCD monitor. In the 
two-image display, you can use magnified view or jump display as well 
as protection, rating and erasure of images.
1Set the two-image display.
 During image playback, press the 
 button.
X The two-image index display will 
appear. The selected image is 
highlighted with an orange frame.
2Select the images to be 
compared.
  Pressing < 0> switches the orange 
frame between the two images.
 
Turn t he  dial to select an image....