Canon EOS 5D Mk.4 Manual

449
R Processing RAW Images with the Camera N
  Brightness adjustment
You can adjust the image brightness up to ±1 stop in 1/3-stop 
increments. The displayed image will reflect the setting’s effect.
   White balance  (p.192)
You can select the white balance. If you select [ Q] and press the 
< B > button, you can select [ Auto: Ambience priority ] or [Auto: 
White priority ]. If you select [ P] and press the < B> button, 
you can set the color temperature.  The displayed image will reflect 
the...

R Processing RAW Images with the Camera N
450
  Color space  (p.217)
You can select either sRGB or Adobe RGB. Since the camera’s LCD 
monitor is not compatible with Adobe RGB, the difference in the 
image will hardly be perceptible when either color space is set.
   Lens aberration correction
•  Peripheral illumination correction  (p.207)
A phenomenon that makes the image corners look darker due to 
the lens characteristic s can be corrected. If [ Enable] is set, the 
corrected image will be displayed....

451
R Processing RAW Images with the Camera N
• Chromatic aberration correction  (p.211)
Chromatic aberrations (color fri nging along the subject’s outline) 
due to the lens characteristics can be corrected. If [ Enable] is set, 
the corrected image will be displayed. If the effect is difficult to 
discern, magnify the image (p.448).
•  Diffraction correction  (p.212)
The diffraction by the lens aperture degrading the image 
sharpness can be corrected. If [ Enable] is set, the corrected 
image will be...

452
You can resize a JPEG image to make the pixel count lower and save it 
as a new image. Resizing an image is possible only with JPEG 3, 4 , 
a , and  b images.  JPEG c images, RAW images, and frame-grab 
images from 4K movies saved as still photos cannot be resized.
1Select [Resize].
  Under the [ 32] tab, select [ Resize], 
then press < 0>.
X An image is displayed.
2Select the images to be resized.
  Turn the < 5> dial to select the 
image you want to resize.
  If you press the < u> button and turn...

453
S Resizing JPEG Images
Resize Options by Original Image Quality
Sizes for resized images are shown below.
(Approx.)
Original Image QualityAvailable Resize Settings
4abc
3 kkkk
4
kkk
a
kk
b
k
Image Sizes
Image 
QualityFull-frame (3:2)4:3 (aspect ratio)
4 4464x2976 (13.3 megapixels) 3968x2976 (11.8 megapixels)
a 3360x2240 (7.5 megapixels) *2976x2240 (6.7 megapixels)
b 1920x1280 (2.5 megapixels) *1696x1280 (2.2 megapixels)
c 720x480 (350,000 pixels) 640x480 (310,000 pixels)
Image 
Quality16:9 (aspect...

454
You can crop a captured JPEG image and save it as another image. 
Cropping an image is possible only with JPEG 3, 4 , a , and  b 
images.  Images shot in JPEG  c or RAW, and frame-grab images 
from 4K movies saved as still photos cannot be cropped.
1Select [Cropping].
  Under the [ x2] tab, select 
[ Cropping ], then press < 0>.
X An image is displayed.
2Select an image.
  Turn the < 5> dial to select the 
image you want to crop.
  If you press the < u> button and turn 
the < 6> dial...

455
N Cropping JPEG Images
  Moving the Cropping Frame
Use < 9> to move the frame over the image vertically or 
horizontally. Move the cropping frame until it covers the desired 
image area.
  Switching the Cropping Frame Orientation
Pressing the < B> button will toggle the cropping frame between 
the vertical and horizontal orientatio ns. This enables you to crop the 
image shot in horizontal orientation to lo ok as if it was shot in vertical 
orientation.
4Check the image area to be 
cropped.
  Press...

456
MEMO 

457
12
Sensor Cleaning
The camera has a Self Cleaning Sensor Unit to 
automatically shake off dust adhered to the image 
sensor’s front layer (low-pass filter).
The Dust Delete Data can also be appended to the 
image so that the dust spots remaining can be deleted 
automatically by Digital Photo Professional (EOS 
software, p.598).
Smudges adhering to the front of the sensorBesides dust entering the camera from outside, in rare cases, 
lubricant from the camera’s internal parts may adhere to the front...

458
Whenever you set the power switch to  or < 2>, the Self 
Cleaning Sensor Unit is activated to  automatically shake off any dust on 
the front of the sensor. Normally, you need not pay attention to this 
operation. However, you can manuall y perform sensor cleaning or can 
disable this unit as follows.
1Select [Sensor cleaning].
 Under the [ 53] tab, select [ Sensor 
cleaning ], then press < 0>.
2Select [Clean now f].
 Select [ Clean now f], then press 
< 0 >.
  Select [ OK].
X The screen will...