Canon EOS 5D Mk.4 Manual

479
14
Customizing theCamera
You can make fine adjustments to various camera 
functions and change the functionality of buttons and 
dials to suit your picture-taking preferences with 
Custom Functions and Custom Controls. 
You can also save the camera’s current settings to the 
, < x>, and < y> modes.
Note that the features explained in this chapter can be 
set and work in the following shooting modes: < d>, 
< s >, < f >, , and < F>. 

480
3 Custom Functions N
81: ExposureA  LV  
Shooting k
 Movie 
Shooting
Exposure level incrementsp.482kk
ISO speed setting increments kIn 
a
Bracketing auto cancelp.483k
Bracketing sequencek
Number of bracketed shots p.484 k
Safety shiftp.485k
Same exposure for new aperturep.486k
82: Exposure
Set shutter speed rangep.488kk
Set aperture range kk
Shaded Custom Functions do not function during Live View (LV) shooting or 
movie shooting. (Settings are disabled.) 

481
3 Custom Functions N
Selecting [85: Clear all Custom Func. (C.Fn) ] will clear all the 
Custom Function settings.
8 3: Display/OperationA  LV  
Shooting k
 Movie 
Shooting
Warnings  z in viewfinderp.489
LV shooting area display
p.490 kDial direction during Tv/Avkk
Custom ControlsDepends on setting
8
4: Others
Add cropping information
p.491 k
Default Erase optionp.492(During playback)
Retract lens on power offkk
Add IPTC informationp.493k
85: Clear
Even if [ 85: Clear all Custom Func.(C.Fn) ] is...

482
Under the [8] tab, you can customize 
various camera features to suit your 
picture-taking pref erences. Any settings 
different from the default will be 
displayed in blue.
3  Custom Function Settings N
C.Fn1: Exposure
Exposure level incrementsC.Fn1
1/3: 1/3-stop
1/2: 1/2-stop
Sets 1/2-stop increments for the shutter speed, aperture, exposure 
compensation, AEB, flash exposure compensation, etc.
ISO speed setting incrementsC.Fn1
1/3: 1/3-stop
1/1: 1-stop
You can change the manual ISO speed setting...

483
3 Custom Function Settings N
Bracketing auto cancelC.Fn1
ON: Enable
When you set the power switch to < 2>, the AEB and white 
balance bracketing settings will be canceled. AEB settings will also 
be canceled when the flash is ready to  fire or if you switch to movie 
shooting.
OFF: Disable The AEB and white balance bracketing settings will not be 
canceled even if you set the power switch to < 2>. (If the flash 
is ready to fire or if you switch to movie shooting, AEB will be 
canceled temporarily,...

3 Custom Function Settings N
484
Number of bracketed shotsC.Fn1
The number of shots taken with AEB and white balance bracketing can 
be changed from the default 3 shots, to 2, 5, or 7 shots.
When [81: Bracketing sequence ] is set to [0, -, + ], the bracketed 
shots will be taken as shown in the table below.
3: 3 shots 5: 5 shots
2: 2 shots 7: 7 shots
(1-stop/step increments)
1st Shot 2nd Shot 3rd Shot 4th Shot 5th Shot 6th Shot 7th Shot
3: 3 shotsStandard (0)-1 +1
2: 2 shotsStandard (0)±1
5: 5...

485
3 Custom Function Settings N
Safety shiftC.Fn1
OFF: Disable
Tv/Av: Shutter speed/Aperture
Takes effect in the < s> shutter-priority AE and < f> aperture-
priority AE modes. If the s ubject brightness changes and the 
standard exposure cannot be obtained within the autoexposure 
range, the camera will automatic ally change the manually-selected 
setting to obtain the standard exposure.
ISO: ISO speed Works in the < d> Program AE, < s> shutter-priority AE, and 
< f > aperture-priority AE modes. If the...

3 Custom Function Settings N
486
Same exposure for new apertureC.Fn1
If the  mode (manual exposure shooting) is set and the ISO 
speed is set manually (except when set to ISO Auto), the open 
aperture value may change to a higher number (a smaller aperture) if 
you perform any of the following:  1. Change the lens, 2. Attach an 
extender, or 3. Use a zoom lens whose open aperture value (f/number) 
changes. If you then shoot while the maximum aperture is set, the 
image will be underexposed by the amount...

487
3 Custom Function Settings N
Tv: Shutter speed
If you perform 1, 2, or 3, a slower  shutter speed will automatically 
be set to compensate for the number of stops the maximum 
aperture has become slower. The same exposure that would be 
obtained without performing 1, 2, or 3 is thereby obtained. The 
shutter speed will change automatically within the range set with 
[ 8 2: Set shutter speed range ].
This function also works in the  reverse with the above options: When 
the maximum aperture f/number...

3 Custom Function Settings N
488
C.Fn2: Exposure
Set shutter speed rangeC.Fn2
You can set the shutter speed range. In the < s> and < a> modes, 
you can set the shutter speed manually within the range you have set. 
In the < d> and < f> modes, the shutter speed will be set 
automatically within the set shutter speed range (except for movie 
shooting). Then select [ OK] to register the setting.
Highest speed You can set it from 1/8000 sec. to 15 sec.
Lowest speed You can set it from 30 sec. to 1/4000...