Canon cinema EOS1D C User Manual
Here you can view all the pages of manual Canon cinema EOS1D C User Manual. The Canon manuals for Cinema are available online for free. You can easily download all the documents as PDF.
Page 81
![Page 81
81
Synchronizing the Time
4Select [Sync time between
cameras].
XSelect [OK] on the next screen
displayed, shown below.
5Select [Wired].
After selecting [Wired], select [OK].
Steps up to this point are the same on
master and slave cameras.
6Set up the master camera.
After configuring the master camera
settings following steps 1–5, select
[Master].
XWhen the next screen is displayed,
the master camera is ready. Go to
step 7 to set up the slave cameras.](http://img.usermanuals.tech/thumb/14/1571/w300_cinema-eos1d-c-1478307421_d-80.png "Page 81
81
Synchronizing the Time
4Select [Sync time between
cameras].
XSelect [OK] on the next screen
displayed, shown below.
5Select [Wired].
After selecting [Wired], select [OK].
Steps up to this point are the same on
master and slave cameras.
6Set up the master camera.
After configuring the master camera
settings following steps 1–5, select
[Master].
XWhen the next screen is displayed,
the master camera is ready. Go to
step 7 to set up the slave cameras.")
81 Synchronizing the Time 4Select [Sync time between cameras]. XSelect [OK] on the next screen displayed, shown below. 5Select [Wired]. After selecting [Wired], select [OK]. Steps up to this point are the same on master and slave cameras. 6Set up the master camera. After configuring the master camera settings following steps 1–5, select [Master]. XWhen the next screen is displayed, the master camera is ready. Go to step 7 to set up the slave cameras.
Page 82
![Page 82
82
Synchronizing the Time
7Set up the slave cameras.
After configuring the slave camera
settings following steps 1–5 on the
preceding pages, select [Slave].
XSelect [OK] on the next screen
displayed, shown below.
To set the time on multiple slave
cameras, follow these steps on each
slave camera. The master camera
screen shown in step 8 indicates the
number of slave cameras.
8On the master camera, select
[OK].
Check the number of slave cameras,
and then select [OK].
XThe time on slave cameras...](http://img.usermanuals.tech/thumb/14/1571/w300_cinema-eos1d-c-1478307421_d-81.png "Page 82
82
Synchronizing the Time
7Set up the slave cameras.
After configuring the slave camera
settings following steps 1–5 on the
preceding pages, select [Slave].
XSelect [OK] on the next screen
displayed, shown below.
To set the time on multiple slave
cameras, follow these steps on each
slave camera. The master camera
screen shown in step 8 indicates the
number of slave cameras.
8On the master camera, select
[OK].
Check the number of slave cameras,
and then select [OK].
XThe time on slave cameras...")
82 Synchronizing the Time 7Set up the slave cameras. After configuring the slave camera settings following steps 1–5 on the preceding pages, select [Slave]. XSelect [OK] on the next screen displayed, shown below. To set the time on multiple slave cameras, follow these steps on each slave camera. The master camera screen shown in step 8 indicates the number of slave cameras. 8On the master camera, select [OK]. Check the number of slave cameras, and then select [OK]. XThe time on slave cameras...
Page 83
83 8 Troubleshooting
Page 84
![Page 84
84
If wired LAN errors are displayed on the camera LCD monitor, refer to
the examples of corrective actions in this chapter to eliminate the cause
of the error. In case of errors, the lamp on the camera blinks.
The error details can also be checked on the [53] tab under
[Communication settings] [Network settings]
[Error description].
If [Waiting to retry transfer…] is displayed
If image transfer via FTP fails after
shooting, the screen on the left is
displayed, and the camera’s
lamp blinks...](http://img.usermanuals.tech/thumb/14/1571/w300_cinema-eos1d-c-1478307421_d-83.png "Page 84
84
If wired LAN errors are displayed on the camera LCD monitor, refer to
the examples of corrective actions in this chapter to eliminate the cause
of the error. In case of errors, the lamp on the camera blinks.
The error details can also be checked on the [53] tab under
[Communication settings] [Network settings]
[Error description].
If [Waiting to retry transfer…] is displayed
If image transfer via FTP fails after
shooting, the screen on the left is
displayed, and the camera’s
lamp blinks...")
84 If wired LAN errors are displayed on the camera LCD monitor, refer to the examples of corrective actions in this chapter to eliminate the cause of the error. In case of errors, the lamp on the camera blinks. The error details can also be checked on the [53] tab under [Communication settings] [Network settings] [Error description]. If [Waiting to retry transfer…] is displayed If image transfer via FTP fails after shooting, the screen on the left is displayed, and the camera’s lamp blinks...
Page 85
![Page 85
85
Handling Error Messages
Is EOS Utility ready for pairing?
XCheck that EOS Utility is ready for pairing (p.44).
Is the target computer on?
XTurn on the target computer and wait for a while.
What to check on the camera
Is the camera’s network setting set to [Auto setting], or its IP
address setting set to [Auto assign]?
XIf you are not using a DHCP server, set the camera’s network setting
to [Manual setting] and IP address setting to [Manual setting] (p.17).
What to check on the DHCP server
Is...](http://img.usermanuals.tech/thumb/14/1571/w300_cinema-eos1d-c-1478307421_d-84.png "Page 85
85
Handling Error Messages
Is EOS Utility ready for pairing?
XCheck that EOS Utility is ready for pairing (p.44).
Is the target computer on?
XTurn on the target computer and wait for a while.
What to check on the camera
Is the camera’s network setting set to [Auto setting], or its IP
address setting set to [Auto assign]?
XIf you are not using a DHCP server, set the camera’s network setting
to [Manual setting] and IP address setting to [Manual setting] (p.17).
What to check on the DHCP server
Is...")
85 Handling Error Messages Is EOS Utility ready for pairing? XCheck that EOS Utility is ready for pairing (p.44). Is the target computer on? XTurn on the target computer and wait for a while. What to check on the camera Is the camera’s network setting set to [Auto setting], or its IP address setting set to [Auto assign]? XIf you are not using a DHCP server, set the camera’s network setting to [Manual setting] and IP address setting to [Manual setting] (p.17). What to check on the DHCP server Is...
Page 86
![Page 86
86
Handling Error Messages
Is the DHCP server functioning correctly?
XCheck the DHCP server settings to make sure it is functioning
correctly as a DHCP server.
XIf applicable, ask your network administrator to ensure that the DHCP
server can be used.
What to check on the camera
Is the camera’s network setting set to [Auto setting], or its IP
address setting set to [Auto assign]?
XIf you are not using a DNS server, set the camera’s DNS address
setting to [Disable] (p.17).
On the camera, does the...](http://img.usermanuals.tech/thumb/14/1571/w300_cinema-eos1d-c-1478307421_d-85.png "Page 86
86
Handling Error Messages
Is the DHCP server functioning correctly?
XCheck the DHCP server settings to make sure it is functioning
correctly as a DHCP server.
XIf applicable, ask your network administrator to ensure that the DHCP
server can be used.
What to check on the camera
Is the camera’s network setting set to [Auto setting], or its IP
address setting set to [Auto assign]?
XIf you are not using a DNS server, set the camera’s DNS address
setting to [Disable] (p.17).
On the camera, does the...")
86 Handling Error Messages Is the DHCP server functioning correctly? XCheck the DHCP server settings to make sure it is functioning correctly as a DHCP server. XIf applicable, ask your network administrator to ensure that the DHCP server can be used. What to check on the camera Is the camera’s network setting set to [Auto setting], or its IP address setting set to [Auto assign]? XIf you are not using a DNS server, set the camera’s DNS address setting to [Disable] (p.17). On the camera, does the...
Page 87
87 Handling Error Messages Is the DNS server functioning correctly? XCheck the DNS server settings to make sure the server is functioning correctly as a DNS server. XIf applicable, ask your network administrator to ensure that the DNS server can be used. What to check on the network as a whole Does your network include a router or similar device that serves as a gateway? XIf applicable, ask your network administrator for the network gateway address and enter it on the camera (p.17, 97). XMake sure...
Page 88
![Page 88
88
Handling Error Messages
What to check on the camera
The camera’s proxy server setting is [Enable]. Does the error
occur under this setting?
XIf you are not using a proxy server, set the camera’s proxy server
setting to [Disable] (p.23).
Do the camera’s [Address setting] and [Port No.] settings match
those of the proxy server?
XConfigure the camera’s proxy server address and port number to match
those of the proxy server (p.22).
In the camera’s [Proxy server] settings, have you only entered...](http://img.usermanuals.tech/thumb/14/1571/w300_cinema-eos1d-c-1478307421_d-87.png "Page 88
88
Handling Error Messages
What to check on the camera
The camera’s proxy server setting is [Enable]. Does the error
occur under this setting?
XIf you are not using a proxy server, set the camera’s proxy server
setting to [Disable] (p.23).
Do the camera’s [Address setting] and [Port No.] settings match
those of the proxy server?
XConfigure the camera’s proxy server address and port number to match
those of the proxy server (p.22).
In the camera’s [Proxy server] settings, have you only entered...")
88 Handling Error Messages What to check on the camera The camera’s proxy server setting is [Enable]. Does the error occur under this setting? XIf you are not using a proxy server, set the camera’s proxy server setting to [Disable] (p.23). Do the camera’s [Address setting] and [Port No.] settings match those of the proxy server? XConfigure the camera’s proxy server address and port number to match those of the proxy server (p.22). In the camera’s [Proxy server] settings, have you only entered...
Page 89
89 Handling Error Messages What to check on the network as a whole Does your network include a router or similar device that serves as a gateway? XIf applicable, ask your network administrator for the network gateway address and enter it on the camera. XMake sure the gateway address setting is correctly entered on all network devices, including the camera. Is another device on the camera network using the same IP address as the camera? XThis error occurs if the camera is connected to a network where...
Page 90
90 Handling Error Messages What to check on the DHCP server Is the DHCP server on? XTurn the DHCP server on. Are the DHCP server settings for IP addresses and the corresponding names correct? XOn the DHCP server, make sure IP addresses and the corresponding names are entered correctly. Is the DHCP server functioning correctly? XCheck the DHCP server settings to make sure it is functioning correctly as a DHCP server. XIf applicable, ask your network administrator to ensure that the DHCP server can...