Home > Canon > Cinema > Canon cinema EOS1D C User Manual

Canon cinema EOS1D C User Manual

Here you can view all the pages of manual Canon cinema EOS1D C User Manual. The Canon manuals for Cinema are available online for free. You can easily download all the documents as PDF.

Page 71

71
Checking Settings
Example of FTP transfer and wired LAN settings 

Page 72

72
Settings originally completed using the connection wizard can be 
changed as follows. You can also change IP security settings (IPsec) 
that cannot be set using the connection wizard, as well as other 
settings, such as when an image with the same file name as an existing 
file is sent to the FTP server (p.73).
1Select [Communication settings].
2Select [Network settings].
 Once [Communication func] is set 
to [Enable], you can select [Network 
settings].
3Select [Set up].
4Select [LAN settings]....

Page 73

73
Changing Settings
5Select the settings number.
 Select the settings number that 
identifies the LAN settings.
6Select [Change].
 After selecting [Change settings 
name], you can rename and change 
the settings.
7Select the item to change.
 Select the desired item from [LAN 
type], [TCP/IP], or [FTP server], and 
change the setting.
Configured in [TCP/IP]  [Security].
IPsec is a set of standards for encrypted communication over the 
Internet. It provides effective security for both wireless and wired...

Page 74

74
Changing Settings
Configured in [FTP server]  [Directory structure].
Selecting [Camera] automatically creates a folder structure matching 
that of the camera’s (such as A/DCIM/100EOS1D) in the server’s root 
folder for image storage. If you have created a subfolder in the root 
folder by changing the [Target folder] setting, a folder structure such as 
A/DCIM/100EOS1D is automatically created in that folder for image 
storage.
Selecting [Default] will use the root folder for image storage. If you...

Page 75

75
Changing Settings
Configured in [FTP server]  [Passive mode].
Enable this setting in network environments protected by a firewall. If an 
Error 41 occurs (“Cannot connect to FTP server”), setting passive mode 
to [Enable] may enable access to the FTP server.
To prevent accidental changes to LAN 
settings, set [Protect settings] to [On].
Passive Mode
Preventing Changes to Settings 

Page 76

76
Network settings can be saved on a memory card for use with other cameras.
1Select [Communication settings].
2Select [Network settings].
 Once [Communication func] is set 
to [Enable], you can select [Network 
settings].
3Select [Set up].
4Select [LAN settings].
Saving and Loading Settings
Saving Settings 

Page 77

77
Saving and Loading Settings
5Select the settings number.
 Select the settings number that 
identifies the LAN settings.
6Select [Change].
7Select [Save settings].
8Select [Save].
XThe settings are now saved as a file 
on the memory card.
 The settings are saved as a file 
(WFTNPF**.NIF) in the area of the 
memory card shown when the card is 
opened (in the root directory).
 The file name is determined 
automatically by the camera: 
WFTNPF, followed by a number (01 
to 99) and the extension NIF. You...

Page 78

78
Saving and Loading Settings
Load settings files stored on a memory card as follows.
Make sure the settings file is saved in the folder shown when the 
memory card is opened (that is, the root directory).
1Select [Load settings].
2Select the settings file.
XSelect a settings file that matches 
your network environment.
3Load the settings file.
XInformation from the settings file is 
loaded into the selected settings 
number.
Loading Settings 

Page 79

79
7
Synchronizing the
Camera Time
Set the master camera time on up to 10 slave cameras, 
as needed. Note that even after synchronization, there 
will be a slight margin of error between master and 
slave camera time of ±0.05 seconds, at most.
Slave camera
Master camera LAN cable
Master camera LAN cable Slave camera
Hub 

Page 80

80
Steps 1–5 are the same on master and slave cameras.
Connect the EOS-1D X cameras to each other with a LAN cable. When 
there are multiple slave cameras, connect them to a hub with LAN 
cables, and connect the hub to the master camera with a LAN cable.
1On the [53] tab, select 
[Communication settings].
2Select [Network settings].
  Once [ Communication func ] is set 
to [ Enable ], you can select [ Network 
settings ].
3Set [Communication mode] to 
[Disconnect].
 Once [ Communication mode ] is set...
Start reading Canon cinema EOS1D C User Manual

Related Manuals for Canon cinema EOS1D C User Manual

All Canon manuals