Canon Camera Eos 5d Mark Iii User Manual

							261
1Play back the image.
 Press the < x> button to display 
images.
2Select a movie.
  Turn the < 5> dial to select the 
movie to be played.
  With the single-image display, the 
 icon displayed on the 
upper left indicates a movie.
 
On the index display, the perforations on 
the left edge of th e image indicates a 
movie. 
As movies cannot be played on 
the index display, press < 0 > to 
switch to the single-image display.
3On the single-image display, 
press < 0>.
XThe movie playback panel will appear 
on the bottom.
4Play back the movie.
  Turn the < 5> dial to select [ 7] 
(Play), then press < 0>.
X The movie will start playing.
  You can pause the movie playback by 
pressing .
 
During movie playback, you can adjust the 
sound volume by turning the  dial.
  For more details on the playback 
procedure, see the next page.
k  Playing Movies
Speaker
Before listening to a mo vie through headphones, tone down the volume to 
prevent hurting your ears.
COPY  
						

							262
k Playing Movies
FunctionPlayback Description
2 ExitReturns to the sing le-image display.
7 PlayPressing < 0> toggles between play and stop.
8 Slow motionAdjust the slow motion  speed by turning the  dial. 
The slow-motion speed is in dicated on the upper right.
5 First frameDisplays the movie’s first frame.
3  Previous frameEach time you press < 0>, the previous frame is 
displayed. If you hold down < 0>, it will rewind the movie.
6 Next frameEach time you press < 0>, the movie will play frame-by-
frame. If you hold down < 0>, it will fast forward the 
movie.
4  Last frameDisplays the movie’s last frame.
X  EditDisplays the editing screen (p.263).
Playback position
mm’ ss”Playback time (minutes:seconds with [ Movie play count: 
Rec time ] set)
hh:mm:ss:ffTime code (hours:minutes:seconds:frames with [ Movie 
play count: Time code ] set)
Vo l u m eYou can adjust the built-in sp eaker’s (p.261) volume by 
turning the < 6> dial.
 With a fully-charged Batt ery Pack LP-E6, the cont inuous playback time 
at 23°C/73°F will be as fo llows: approx. 3 hr. 30 min.
  By connecting commercially-availabl e headphones equipped with a 3.5 
mm stereo mini plug to the camera’s  headphone terminal (p.19), you can 
listen to the movie’s sound (p.235).
  If you connect the camera to a TV set  (p.268, 271) to play back a movie, 
adjust the sound volume with the TV set. (Turning the < 6> dial will not 
adjust the sound volume.)
  If you took a still photo while you shot the movie, the movie image 
displayed will look stil l for approx. 1 sec..
COPY  
						

							263
You can edit out the first and last scenes of a movie in 1-sec. 
increments.
1On the movie playback screen, 
select [X].
X The movie editing panel will be 
displayed at the bottom of the screen.
2Specify the part to be edited out.
  Select either [ U] (Cut beginning) or 
[V ] (Cut end), then press < 0>.
  Tilt < 9> to the left or right to see the 
previous or next frames. Holding it 
down will fast forward the frames. 
Turn the < 5> dial for frame-by-
frame playback.
  After deciding which part to edit out, 
press < 0>. The portion highlighted 
in blue on the top of the screen is 
what will remain.
3Check the edited movie.
  Select [7 ] and press < 0> to play 
back the portion highlighted in blue.
  To change the editing, go back to step 
2.
  To cancel the editing, select [ 2] and 
press < 0>.
X Editing the Movie’s First and Last Scenes
COPY  
						

							264
X Editing the Movie’s First and Last Scenes
4Save the movie.
  Select [W ], then press < 0>.
X The save screen will appear.
  To save it as a new movie, select 
[New file ]. To save it and overwrite 
the original movie file, select 
[Overwrite ]. Then press < 0>.
  On the confirmation screen, select 
[OK ], then press < 0> to save the 
edited movie and return to the movie 
playback screen.
  Since the editing is perform ed in 1-sec. increments (position indicated by 
[ X ]), the exact position where the movie  is edited may differ slightly from 
the position you specified.
  If the card does not have  enough free space, [New file] will not be 
available.
COPY  
						

							265
You can play back the images on the card as an automatic slide show.
1Select [Slide show].
 Under the [ 32] tab, select [Slide 
show ], then press < 0>.
2Select the images to be played.
  Turn the < 5> dial to select the 
desired option, then press < 0>.
[All images/Movies/Stills]
  Turn the < 5> dial to select one of 
the following: [ jAll images/
k Movies/z Stills]. Then press 
< 0 >.
[Date/Folder/Rating]
  Turn the < 5> dial to select one of 
the following: [ iDate/
nFolder/
9 Rating].
  When < zH> is highlighted, 
press the < B> button.
  Turn the < 5> dial to select the 
desired setting, then press < 0>.
3  Slide Show (Auto Playback)
Number of images to be played
[Date ][ Folder][ Rating]
COPY  
						

							266
3 Slide Show (Auto Playback)
3Set the play time and repeat 
option.
 Turn the < 5> dial to select [ Set up], 
then press < 0>.
  For still photos, set the [ Display time] 
and [Repeat ] options, then press the 
< M > button.
ItemPlayback Description
jAll imagesAll the still photos and movies  on the card will be played 
back.
i DateStill photos and movies taken on the selected shooting 
date will be played back.
nFolder Still photos and movies in the selected folder will be 
played back.
k
MoviesOnly the movies on the card will be played back.
zStillsOnly the still photos on  the card will be played back.
9Rating Only the still photos and movi
es with the selected rating 
will be played back.
[Display time] [Repeat]
COPY  
						

							267
3 Slide Show (Auto Playback)
4Start the slide show.
 Turn the < 5> dial to select [ Start], 
then press < 0>.
X After [ Loading image... ] is displayed, 
the slide show will start.
5Quit the slide show.
  To quit the slide show and return to 
the setting screen, press the < M> 
button.
  To pause the slide show, press < 0>. During pause, [ G] will be 
displayed on the upper left  of the image. Press  again to resume 
the slide show.
  During auto playback , you can press the  button to change the 
still photo display format (p.244).
  During movie playback, you can adjust  the sound volume by turning the 
 dial.
  During auto playback or  pause, you can turn the < 5> dial to view 
another image.
  During auto playback, auto  power off will not work.
  The display time may vary depending on the image.
  To view the slide show on a  TV set, see pages 268 and 271.
COPY  
						

							268
You can view the still photos and movies on a TV set.
HDMI Cable HTC-100 (sold separately) is required.
1Connect the HDMI cable to the 
camera.
 With the plug’s < dHDMI MINI > logo 
facing the front of the camera, insert it 
into the < D > terminal.
2Connect the HDMI cable to the TV 
set.
 Connect the HDMI cable to the TV’s 
HDMI IN port.
3Turn on the TV and switch the 
TV’s video input to select the 
connected port.
4Set the camera’s power switch to 
.
Viewing the Images on TV
Viewing on High-Definition (HD) TV Sets
 Adjust the movie’s sound volume wi th the TV set. The sound volume 
cannot be adjusted with the camera.
  Before connecting or disconnectin g the cable between the camera and 
television, turn off th e camera and TV set.
  Depending on the TV se t, part of the image displayed may be cut off.
COPY  
						

							269
Viewing the Images on TV
5Press the  button.
XThe image will appear on the TV 
screen. (Nothing will be displayed on 
the camera’s LCD monitor.)
  The images will automatically be 
displayed at the TV’s optimum 
resolution.
  By pressing the < B> button, you 
can change the display format.
  To play back movies, see page 261.
If the TV set connected to the camera  with an HDMI cable is compatible 
with HDMI CEC*, you can use the TV set’s remote control for playback 
operations.
* An HDMI-standard function enabling HDMI device s to control each other so that you can control them with one remote control unit.
1 Set [Ctrl over HDMI] to [Enable].
  Under the [ 33] tab, select [ Ctrl over 
HDMI ], then press < 0>.
  Select [Enable ], then press .
Using HDMI CEC TV Sets
The movie cannot be output at  the same time from both the  
and < q > terminals.
 Do not connect any ot her device’s output to the camera’s  
terminal. Doing so ma y cause a malfunction.
  Certain TVs may not be able to play  back the captured images. In such a 
case, use the provided AV ca ble to connect to the TV.
COPY  
						

							270
Viewing the Images on TV
2Connect the camera to a TV set.
 Use an HDMI cable to connect the 
camera to the TV.
X
The TV’s input will sw itch automatically to 
the HDMI port connected to the camera.
3Press the camera’s < x> button.
XAn image will appear on the TV 
screen and you can use the TV’s 
remote control to play back images.
4Select an image or movie.
  Point the remote control toward the 
TV set and press the /  button to 
select an image.
5Press the remote control’s Enter button.
XThe menu appears and  you can perform 
the playback operations shown on the left.
 Press the / button to select the 
desired option, then press the Enter 
button. For a slide show, press the remote 
control’s 
/ button to sele ct an option, 
then press the Enter button.
 If you select [Return] and press the Enter 
button, the menu will disappear and you can 
use the 
/ button to select an image.
Still photo playback menu
Movie playback menu
: Return
: 9-image index
: Play movie
: Slide show
: Disp. shooting info
: Rotate
During the two-image display (p.253), pl ayback with the TV’s remote control 
is not possible. To use the TV’s remote control for playback, first press the 
 button to return to th e single-image display.
 Some TV sets require yo u to first enable the HDMI CEC connection. For 
details, refer to the TV set’s instruction manual.
 
Certain TV sets, even those compatib le with HDMI CEC, may not operate 
properly. In such a case, set [3 3: Ctrl over HDMI] to [Disable], and use 
the camera to control  the playback operation.
COPY