Canon 5dsr Manual

351
By connecting the camera to a TV set with an HDMI cable (sold 
separately), you can play the camera’s still photos and movies on the 
TV set. For the HDMI cable, HDMI Cable HTC-100 (sold separately) is 
recommended.
If the picture does not appear on the TV screen, set the [
53: Video 
system] correctly to [For NTSC] or [For PAL] (depending on the video 
system of your TV set). 
1Connect the HDMI cable to the 
camera.
 With the plug’s < dHDMI MINI> logo 
facing the front of the camera, insert it...

Viewing Images on a TV Set
352
If the TV set connected to the camera with an HDMI cable is compatible 
with HDMI CEC*, you can use the TV set’s remote control for playback 
operations.
* An HDMI-standard function enabling HDMI devices to control each other so that you can control them with one remote control unit.
1Set [Ctrl over HDMI] to [Enable].
Under the [ 33] tab, select [Ctrl over 
HDMI], then press < 0>.
 Select [ Enable], then press < 0>.
2Connect the camera to a TV set.
 Use an HDMI cable to...

353
Viewing Images on a TV Set
3Press the camera’s  button.
An image will appear on the TV 
screen and you can use the TV set’s 
remote control to play back images.
4Select an image.
 Point the remote control toward the 
TV set and press the  /  button to 
select an image.
5Press the remote control’s Enter 
button.
 The menu appears and you can 
perform the playback operations 
shown on the left.
 Press the remote control’s  /  
button to select the desired option, 
then press the Enter button....

354
The images recorded on one card can be copied to another card.
1Select [Image copy].
Under the [3 1] tab, select [Image 
copy ], then press < 0>.
2Select [Sel.Image].
 Check the copy source and target 
cards’ number, and remaining 
capacity.
 Select [ Sel.Image ], then press < 0>.
3Select the folder.
 Select the folder containing the image 
you want to copy, then press < 0>.
 Check the images displayed on the 
right to select the desired folder.
 The images in the selected folder will 
be...

355
a Copying Images
 4Select the images to be copied.
 Turn the < 5> dial to select an image 
to be copied, then press .
 The [X] icon will appear on the upper 
left of the screen.
 If you press the  button and turn 
the < 6> dial counterclockwise, you 
can select an image from a three-
image display. To return to the single-
image display, turn the < 6> dial 
clockwise.
 To select other images to be copied, 
repeat step 4.
5Press the  button.
After selecting all the images to be 
copied, press the...

a Copying Images
356
8Select [OK].
 Check the information of the source 
card and target card, then select 
[OK ].
 The copying will start and the 
progress will be displayed.
 When the copying is completed, the 
result will be displayed. Select [ OK] to 
return to the screen in step 2.
You can copy all the images in a folder or on a card at once. Under [x1: Image copy ], when you 
select [Sel.n ] or [All image ], you can 
copy all the images in the folder or on a 
card.
3  Copying All Images in a...

357
a Copying Images
 The file name of the copied image will be the same as the source 
image’s file name.
 If [Sel.Image ] is set, you cannot copy images in multiple folders at once. 
Select images in each folder to copy them folder by folder.
 If an image is being copied to a target folder/card which has an image 
with the same file number, the  following will be displayed: [Skip image 
and continue ] [Replace existing image ] [Cancel copy ]. Select the 
copying method, then press < 0>.
•[ Skip...

358
You can either select and erase unnecessary images one by one or 
erase them in one batch. Protected images (p.334) will not be erased.
Once an image is erased, it cannot be recovered. Make sure you 
no longer need the image before erasing it. To prevent important 
images from being erased accidentally, protect them. Erasing a 
RAW+JPEG image will erase both the RAW and JPEG images.
1Play back the image to be erased.
2Press the  button.
The Erase menu will appear.
3Erase the image.
 Select [...

359
L Erasing Images
By appending checkmarks < X> to the images to be erased, you can 
erase multiple images at once.
1Select [Erase images].
Under the [3 1] tab, select [Erase 
images], then press < 0>.
2Select [Select and erase images].
An image will be displayed.
 If you press the  button and turn 
the < 6> dial counterclockwise, you 
can select an image from a three-
image display. To return to the single-
image display, turn the < 6> dial 
clockwise.
3Select the images to be erased.
Turn the...

L Erasing Images
360
You can erase all the images in a folder or on a card at once. When 
[31: Erase images] is set to [ All images in folder] or [All images on 
card ], all the images in the folder or on the card will be erased.
3  Erasing All Images in a Folder or on a Card
To erase all images, including protected images, format the card (p.67).The images on the card selected for [Record/play] or [ Playback] under 
[ 5 1: Record func+card/folder sel. ] will be erased.