Canon 5dsr Manual

401
3 Custom Functions N
Selecting [84: Clear all Custom Func. (C.Fn) ] will clear all the 
Custom Function settings.
8 3: OthersA  LV  
Shooting k Movie 
Shooting
Warnings  z in viewfinderp.409
Dial direction during Tv/Avp.410 kkMulti function lockkk
Custom Controlsp.411Depends on settingAdd cropping informationk
Default Erase optionp.412(During playback)
Retract lens on power offkk
8
4: Clear
Even if [ 84: Clear all Custom Func.(C.Fn) ] is executed, the settings for 
[ 8 3: Custom Controls ] will...

402
Under the [8] tab, you can customize 
various camera features to suit your 
picture-taking preferences. Any settings 
different from the default will be 
displayed in blue.
3  Custom Function Settings N
C.Fn1: Exposure
Exposure level increments
1/3: 1/3-stop
1/2: 1/2-stop
Sets 1/2-stop increments for the shutter speed, aperture, exposure 
compensation, AEB, flash exposure compensation, etc. This is 
effective when you prefer to control the exposure in less fine 
increments than 1/3-stop.
ISO speed...

403
3 Custom Function Settings N
Bracketing auto cancel
ON: EnableWhen you set the power switch to , the AEB and white balance 
bracketing settings will be canceled. AEB will also be canceled when 
the flash is ready to fire or if you switch to movie shooting.
OFF: Disable The AEB and white balance bracketing settings will not be 
canceled even if you set the power switch to < 2>. (If the flash 
is ready to fire or if you switch to movie shooting, AEB will be 
canceled temporarily, but the AEB range will...

3 Custom Function Settings N
404
Number of bracketed shots
The number of shots taken with AEB and white balance bracketing can 
be changed from the default, 3 shots, to 2, 5, or 7 shots.
When [Bracketing sequence: 0, -, + ] is set, the bracketed shots will 
be taken as shown in the table below.
3: 3 shots
2: 2 shots
5: 5 shots
7: 7 shots
(1-stop increments)
1st Shot 2nd 
Shot 3rd 
Shot 4th 
Shot 5th 
Shot 6th 
Shot 7th 
Shot
3: 3 shots Standard (0) -1 +1
2: 2 shots Standard (0) ±1
5: 5 shots Standard (0)...

405
3 Custom Function Settings N
Safety shift
OFF: Disable
Tv/Av: Shutter speed/Aperture
This takes effect in the shutter-priority AE ( s) and aperture-
priority AE ( f) modes. If the subject brightness changes and the 
standard exposure cannot be obtained within the autoexposure 
range, the camera will automatic ally change the manually-selected 
setting to obtain a standard exposure.
ISO: ISO speed This works in the Program AE ( d), shutter-priority AE ( s), and 
aperture-priority AE ( f) modes. If the...

3 Custom Function Settings N
406
Same exposure for new aperture
If the  mode (manual exposure shooting) is set and the ISO 
speed is set manually (other than Auto ISO or H (12800) is set), the 
maximum aperture’s f/number may change to a higher number 
(smaller aperture) if you do any of the following: 1. Change the lens, 2. 
Attach or detach an Extender, or 3.  Use a zoom lens whose maximum 
aperture f/number changes. If you then shoot at the exposure setting 
as is, the image will be underexposed by...

407
3 Custom Function Settings N
This function does not work with ma cro lenses whose actual aperture 
f/number changes when the magnification changes.
 This function does not work with movies.
 If [ISO speed ] is set and the exposure cannot be maintained within the 
range set with [ ISO speed range ], the ISO speed will be automatically 
switched within the specified range.
 If [Shutter speed ] is set and the exposure cannot be maintained within 
the range set with [ 82: Set shutter speed range ],...

3 Custom Function Settings N
408
C.Fn2: Exposure
Set shutter speed range
You can set the shutter speed range. In the < s>  modes, you 
can set the shutter speed manually within the shutter speed range that 
you have set. In the < d> < f
> modes, the shutter speed will be set 
automatically within the shutter speed range that you have set.
Highest speed You can set it from 1/8000 sec. to 15 sec.
Lowest speed You can set it from 30 sec. to 1/4000 sec.
Set aperture range
You can set the aperture range. In...

409
3 Custom Function Settings N
C.Fn3: Others
Warnings z in viewfinder
When any of the following functions are set, the < z> icon can be 
displayed in the viewfinder (p.31).
Select the function for which you want the warning icon to appear, and 
press < 0> to append a < X>. Then select [ OK] to register the setting.
When monochrome  V is set
If the Picture Style is set to [ Monochrome] (p.166), the warning 
icon will appear.
When WB is corrected If white balance correction is set (p.179), the warning...

3 Custom Function Settings N
410
Dial direction during Tv/Av
 : Normal
 : Reverse direction
Dial turning direction when setting the shutter speed and aperture 
can be reversed.
In the < a> shooting mode, the turning direction of the < 6> and 
< 5 > dials will be reversed. In other shooting modes, the turning 
direction of only the < 6> dial will be reversed. The < 5> dial’s 
turning direction in the < a> mode and the turning direction to set 
the exposure compensation in the < d>, < s>, and < f> mode...