Canon 5dsr Manual

331
u Magnifying Images
Under the [3 3] tab, when you select 
[Magnificatn (apx) ], you can set the 
starting magnification and initial position 
for the magnified view.
 1x (no magnification)
The image is not magnified. The magnified view will start with the 
single-image display.
 2x, 4x, 8x, 16x (magnify from center)
The magnified view starts at the image center at the selected 
magnification.
 Actual size (from selected point)
The recorded image’s pixels will  be displayed at approx. 100%. The...

332
You can compare two images side by side on the LCD monitor. In the 
two-image display, you can use magnified view or jump display as well 
as protection, rating and erasure of images.
1Set the two-image display.
During image playback, press the 
 button.
 The two-image index display will 
appear. The currently-selected image 
will be highlighted with an orange 
frame.
2Select the images to be 
compared.
 Pressing < 0> switches the orange 
frame between the two images.

Turn the  dial to select an...

333
You can rotate the displayed image to the desired orientation.
1Select [Rotate image].
Under the [3 1] tab, select [Rotate 
image ], then press < 0>.
2Select an image.
 Turn the < 5> dial to select the 
image to be rotated.
 You can also select an image in the 
index display (p.327).
3Rotate the image.
Each time you press , the 
image will rotate clockwise as follows: 
90°  9 270° 9  0°.
 To rotate another image, repeat steps 
2 and 3.
b Rotating the Image
 If you set [ 51: Auto rotate]  to...

334
You can protect important images from being accidentally erased by the camera’s erase function.
1Select [Protect images].
Under the [3 1] tab, select [Protect 
images], then press < 0>.
2Select [Select images].
An image will be displayed.
3Select an image.
 Turn the < 5> dial to select the 
image to be protected.
 You can also select an image or 
movie on the index display (p.327).
4Protect the image.
Press < 0> to protect the selected 
image. The < K> icon will appear at 
the top of the...

335
K Protecting Images
You can protect all the images in a folder or on a card at once.
When you select [All images in folder] 
or [All images on card ] in [31: 
Protect images], all the images in the 
folder or on the card will be protected.
To cancel the image protection, select 
[Unprotect all images in folder ] or 
[Unprotect all images on card ].
3 Protecting All Images in a Folder or on a Card
If you format the card (p.67) , the protected images will also be erased.
Movies can also be protected....

K Protecting Images
336
During image playback, you can use the < c> button to protect an 
image.
1Select [ m btn function].
Under the [5 3] tab, select [ m 
button function ], then press .
2Select [Protect].
3Select an image.
 Press the < x> button to play back 
images.
 Turn the < 5> dial to select the 
image to be protected.
 You can also select an image or 
movie on the index display (p.327).
4Protect the image.
When you press the  button, 
the image will be protected and the 
< K > icon will...

337
You can rate images (still photos and movies) with one of the five rating marks: l/m /n/o/p. This function is called rating.
1Select an image.
During image playback, turn the 
 dial to select an image or movie 
to be rated.
 You can also select an image or 
movie on the index display (p.327).
2Rate the image.
Each time you press the  
button, the rating mark will change: 
l /m /n/o/p/None.
 To rate another image, repeat steps 1 
and 2.
Setting Ratings
Rating Images with the < c> Button
If [53:...

Setting Ratings
338
1Select [Rating].
Under the [3 2] tab, select [Rating], 
then press < 0>.
2Select an image.
 Turn the < 5> dial to select an image 
or movie to be rated.
 If you press the  button and turn 
the < 6> dial counterclockwise, you 
can select an image from a three-
image display. To return to the single-
image display, turn the < 6> dial 
clockwise.
3Rate the image.
 Press < 0> and a blue highlight 
frame will appear as shown in the 
screenshot.
 Turn the < 5> dial to select a rating,...

339
Setting Ratings
A total of up to 999 images of a given rating can be displayed. If there are 
more than 999 images with a given rating, [ ###] will be displayed.
Taking Advantage of Ratings
With [ 32: Image jump w/ 6], you can display only images having the 
specified rating.
 With [3 2: Slide show ], you can play back only images with a specific 
rating.
 With Digital Photo Professional (EOS software, p.521), you can select 
only the image with  a specific rating (still photos only).
 With...

340
During playback, you can press the  button to set the following: 
[J : Protect images ], [b : Rotate image], [9 : Rating], [R: RAW 
image processing] (RAW images only), [ S: Resize] (JPEG image 
only), [ N: Cropping] (JPEG images only), [ : Highlight alert], 
[ : AF point display ], and [e : Image jump w/ 6].
For movies, only the functions in bold above  can be set.
1Press the  button.
During image playback, press the 
 button.
 The Quick Control options will 
appear.
2Select an item and set it.
...