Canon 5dsr Manual

341
Q Quick Control for Playback
To rotate an image, set [ 51: Auto rotate ] to [OnzD ]. If [ OnD] or [ Off] is 
set, the [ b Rotate image ] setting will be recorded to the image, but the 
camera will not rotate the image for display.
 Pressing the < Q> button during the index display will switch to the 
single-image display and the Quick Control screen will appear. Pressing 
the < Q> button again will return to the index display.
 For images taken with another camera, the options you can select may...

342
You can play back movies in the following three ways:By connecting the camera to a TV set 
with HDMI Cable HTC-100 (sold 
separately), you can play back the 
camera’s still photos and movies on the 
TV set.
You can play back movies on the 
camera’s LCD monitor. You can also edit 
out the movie’s first and last scenes, and 
play back the still photos and movies on 
the card in an automatic slide show.
k Enjoying Movies
Playback on a TV Set(p.351)
Playback on the Camera’s LCD Monitor(p.344-345)
 Since...

343
k Enjoying Movies
To play back or edit a movie, use pre-
installed or general-purpose software, 
compatible with the movie’s recording 
format.
Playback and Editing with a Computer
If you play back or edit a movie with commercially-available software, use 
software compatible with MOV-format movies. For details on commercially-
available software, contact the software manufacturer. 

344
1Play back the image.
Press the < x> button to display an 
image.
2Select a movie.
 Turn the < 5> dial to select the 
movie to be played.
 With the single-image display, the 
 icon displayed on the 
upper left indicates a movie.

In the index display, perforations at the 
left edge of a thumbnail indicate a 
movie. 
As movies cannot be played 
from the index display, press  
to switch to the single-image display.
3In the single-image display, press 
< 0>.
 The movie playback panel will appear...

345
k Playing Back Movies
Movie Playback Panel
OperationPlayback Description
7 PlayPressing  toggles between play and stop.
8 Slow motionAdjust the slow motion speed by turning the < 5> dial. 
The slow motion speed is indicated on the upper right of 
the screen.
5  First frameDisplays the movie’s first frame.
3  Previous frameEach time you press < 0>, the previous frame is 
displayed. If you hold down < 0>, it will rewind the movie.
6  Next frameEach time you press < 0>, the movie will play frame-by-...

346
You can edit out the first and last scenes of a movie in approx. 1-sec. increments. You can also edit time-lapse movies.
1On the movie playback screen, 
select [X].
 The movie editing panel will be 
displayed at the bottom of the screen.
2Specify the part to be edited out.
 Select either [ U] (Cut beginning) or 
[V ] (Cut end), then press < 0>.
 Tilt < 9> to the left or right to see the 
previous or next frames. Holding 
down the key will fast forward or fast 
rewind the frames. Turn the < 5> dial...

347
X Editing a Movie’s First and Last Scenes
4Save the edited movie.
 Select [ W], then press < 0>.
 The save screen will appear.
 To save it as a new movie, select 
[New file ]. To save it and overwrite 
the original movie file, select 
[Overwrite ], then press < 0>.
 On the confirmation dialog, select 
[OK ] to save the edited movie and 
return to the movie playback screen.
 Since the editing is performed in ap prox. 1-sec. increments (position 
indicated by [ ] on the top of the screen), the...

348
You can play back the images on the card as an automatic slide show.
1Select [Slide show].
Under the [3 2] tab, select [Slide 
show ], then press < 0>.
2Select the images to be played 
back.
 Select the desired option on the 
screen, then press .
All images/Movies/Stills/Protect
 Select one of the following: [ jAll 
images] [k Movies] [zStills ] 
[J Protect]. Then press < 0>.
Date/Folder/Rating
 Select one of the following: [ iDate ] 
[
nFolder ] [9Rating ].
 When < zH> is highlighted, 
press...

349
3 Slide Show (Auto Playback)
3Configure [Set up] as desired.
Select [ Set up], then press < 0>.
 Set the [Display time] and [ Repeat] 
settings for still photos.
 After completing the settings, press 
the < M > button.
ItemPlayback Description
jAll imagesAll the still photos and movies  on the card will be played 
back.
i DateStill photos and movies taken on the selected shooting date 
will be played back.
n FolderStill photos and movies in the selected folder will be played 
back.
kMoviesOnly the...

3 Slide Show (Auto Playback)
350
4Start the slide show.
Select [ Start], then press < 0>.
 After [ Loading image... ] is displayed, 
the slide show will start.
5Exit the slide show.
 To exit the slide show and return to 
the setting screen, press the < M> 
button.
 To pause the slide show, press < 0>. During pause, [ G] will be 
displayed on the upper left of the image. Press < 0> again to resume 
the slide show.
 During auto playback, you can press the < B> button to change the 
still photo display...