Canon 5dsr Manual

321
x Image Playback
3Exit the image playback.
Press the < x> button to exit the 
image playback and return to 
shooting-ready state.
With the shooting information screen displayed (p.320), you can tilt 
< 9 > up or down to change the shooting information displayed at the 
screen’s bottom as follows. For details, see pages 323-324.
In single-image display and two-image 
display (p.332), you can overlay the grid 
on the image playback.
With [33: Playback grid ], you can 
select [ 3x3 l], [6x4  m], or [...

322
Basic information display
B : Shooting Information Display
Sample Information for Still Photos
Shutter speed
Folder number - 
File number
Rating
Eye-Fi card transmission status
Playback number/
Total images 
recorded Protect images
Eye-Fi transfer completed
Battery level
Card
Image-recording 
quality/Edited 
images/Cropping
Highlight tone priority
ISO speed
Aperture
Exposure compensation 
amount
 If the image was taken by another camera, certain shooting information 
may not be displayed.
 It may...

323
B: Shooting Information Display
Shooting information display 
•Detailed information
* When you shoot in RAW+JPEG image quality, the RAW image file size will be 
displayed.
* Lines indicating the shooting area will be displayed for images taken with the  crop/aspect ratio set and with RAW or RAW+JPEG set for image quality.
* Lines indicating the shooting area will be displayed for images with cropping  information appended (p.411).
* During flash photography without  flash exposure compensation,...

B: Shooting Information Display
324
•Lens/Histogram information
• Lens aberration correction information
Histogram display 
(Brightness)
Lens name
Focal length
Histogram display 
(RGB)
• White balance information •Picture Style information 1
• Picture Style information 2 •
Color space / Noise 
reduction information
If you used GPS Receiver GP-E2 to record GPS information for the image, 
tilt < 9> up or down to view the “GPS information” screen. 

325
B: Shooting Information Display
• < > and < > modes: Shutter speed, aperture and ISO speed are not 
displayed.
• < > mode: Aperture and ISO speed are not displayed.
• < > mode: Shutter speed and ISO speed are not displayed.
• < > mode + Auto ISO: ISO speed is not displayed.
 Highlight Alert
When [33: Highlight alert ] is set to [Enable], overexposed, 
clipped highlights will blink. To obtain more image detail in the 
overexposed, blinking areas, set  the exposure compensation to a 
negative amount...

B: Shooting Information Display
326
Histogram
The brightness histogram shows the exposure level distribution and 
overall brightness. The RGB hist ogram is for checking the color 
saturation and gradation. The display can be switched with [ 33: 
Histogram disp. ].
[Brightness] Display This histogram is a graph showing the 
distribution of the image’s brightness level. The 
horizontal axis indicates the brightness level 
(darker on the left and brighter on the right), 
while the vertical axis indicates...

327
You can search for images quickly with the index display showing 4, 9, 
36, or 100 images on one screen.
1Press the  button.
During image playback or when the 
camera is ready to shoot, press the 
 button.
 [6 u] will be displayed on the lower 
right of the screen.
2Switch to the index display.
Turn the  dial counterclockwise.
 The 4-image index display will 
appear. The selected image is 
highlighted with an orange frame.
 Turning the < 6> dial further 
counterclockwise will switch the 
display...

x Searching for Images Quickly
328
In the single-image display, you can turn the  dial to jump through 
the images forward or backward according to the jump method set.
1Select [Image jump w/6].
Under the [3 2] tab, select [Image 
jump w/ 6], then press < 0>.
2Select the jump method.
 Select the jump method, then press 
.
d: Display images one by one
e: Jump 10 images
f: Jump 100 images
g: Display by date
h: Display by folder
i: Display movies only
j: Display stills only
P: Display protected images...

329
x Searching for Images Quickly
3Browse by jumping.
Press the < x> button to play back 
images.
 In the single-image display, turn the 
 dial.
 You can browse by the method that 
was set.
Playback position
Jump method

To search images by shooting date, select [ Date].
 To search images by folder, select [ Folder].
 If the card contains both movies and still photos, select [ Movies] or 
[ Stills ] to display one or the other.
 If no images match the [ Protect] or [Rating] setting, you cannot...

330
You can magnify a captured image by approx. 1.5x to 16x on the LCD monitor.
1Magnify the image.
The image can be magnified as 
follows: 1. During image playback 
(single-image display), 2. During the 
image review after image capture, 
and 3. From the shooting-ready state.
 Press the < u> button.
 The magnified view will appear. The 
magnified area and [ 6u] will be 
displayed on the lower right of the 
screen.
 The image magnification increases 
as you turn the < 6> dial clockwise. 
You can...