Brother Printers Intellifax 2750 Plain Paper Laser Fax Owners Manual
Have a look at the manual Brother Printers Intellifax 2750 Plain Paper Laser Fax Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 331 Brother manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
129IMPORTANT INFORMATION Notice Ð Disclaimer of Warranties BROTHERÕS LICENSOR(S), AND THEIR DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS (COLLECTIVELY BROTHERÕS LICENSOR) MAKE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THE SOFTWARE. BROTHERÕS LICENSOR(S) DOES NOT WARRANT, GUARANTEE OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY, CURRENTNESS OR OTHERWISE. THE ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE SOFTWARE IS ASSUMED BY YOU. THE EXCLUSION OF IMPLIED WARRANTIES IS NOT PERMITTED BY SOME STATES. THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. IN NO EVENT WILL BROTHERÕS LICENSOR BE LIABLE TO YOU FOR ANY CONSEQUENTIAL, INCIDENTAL OR INDIRECT DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OR INABILITY TO USE THE SOFTWARE EVEN IF BROTHERÕS LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. IN ANY EVENT BROTHERÕS LICENSORÕS LIABILITY TO YOU FOR ACTUAL DAMAGES FROM ANY CAUSE WHATSOEVER, AND REGARDLESS OF THE FORM OF THE ACTION (WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE), WILL BE LIMITED TO $50. Compilation and Publication Notice Under the supervision of Brother Industries Ltd., this manual has been compiled and published, covering the latest product descriptions and specifications. The contents of this manual and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publication.
130CHAPTER FOURTEEN Trademarks The brother logo is a registered trademark of Brother Industries, Ltd. © Copyright 1998 Brother Industries, Ltd. All rights reserved. © Copyright 1998 Smith Micro Software, Inc. All rights reserved. © Copyright 1998 Visioneer, Inc. All rights reserved. Brother is a registered trademark of Brother Industries, Ltd. Visioneer PaperPort LE is a registered trademark of Visioneer, Inc. Windows, Microsoft and MS-DOS are registered trademarks of Microsoft in the U.S. and other countries. Excel and Word are trademarks of Microsoft Corp. TextBridge is a trademark of Xerox Imaging Systems, Inc. NetCentric and FaxStorm are registered trademarks of NetCentric Corporation. TrueType is a trademark of Apple Computer, Inc. Centronics is a trademark of Genicom Corporation. Epson is a registered trademark and FX-80 and FX-850 are trademarks of Seiko Epson Corporation. Hewlett Packard is a registered trademark and HP LaserJet II, IIP, and IID are trademarks of Hewlett-Packard Company. IBM, IBM PC, and Proprinter are registered trademarks of International Business Machines Corporation. Hammermill copyplus white is a registered trademark of International Paper. All other terms and brand and product names mentioned in this manual are registered trademarks of their respective companies.
15 CHAPTER FIFTEEN Fax Specifications CompatibilityITU-T Group 3 Coding SystemMH/MR/MMR Modem Speed14400 Ð 2400 bps (FAX 2750) 33600 Ð 2400 bps (FAX 3750) Document Input Width5.8 inches to 8.5 inches (148 mm to 216 mm) Document Input Length3.9 inches to 14.1 inches (100 mm to 360 mm) Scanning/Printing Width8.2 inches (208 mm) Paper SizeLetter/Legal/A4 Multi-purpose Sheet Feeder200 sheets (20 lbs) Printer TypeLaser Printer Gray Scale64 levels Polling TypesStandard or Sequential Contrast ControlAutomatic/Super Light/Super Dark (manual setting) ResolutionFAX 2750: ¥ Horizontal Standard, Fine, Superfine 203 dot/inch ¥ Vertical Standard 98 dot/inch Fine, Photo 196 dot/inch Superfine 391 dot/inch FAX 3750: ¥ Horizontal Standard, Fine, Superfine 200 dot/inch ¥ Vertical Standard 100 dot/inch Fine, Photo 200 dot/inch Superfine 400 dot/inch Specifications 131
132CHAPTER FIFTEEN One Touch dial24 stations Speed Dial100 stations Automatic Redial3 times at 5 minute intervals Speaker TypeMonitor Auto Answer0, 1, 2, 3 or 4 rings Communication SourcePublic switched telephone network Printer Specifications (Available with Software Option) Printer DriverWindows¨ 3.1, 3.11, Windows¨ 95, 98, and Windows NT¨ Workstation Version 4.0 drivers supporting Brother Native Compression mode and bi-directional capability Memory Capacity1 MB (FAX 2750) 2 MB (FAX 3750) Print MethodElectrophotography by semiconductor laser beam scanning Resolution600 dots/inch Print QualityNormal printing mode Economy printing mode (saves up to 50% of the normal toner usage) Print Speed6 pages/minute (when loading letter size or A4 paper from the multi-purpose sheet feeder) Print MediaToner cartridge: Life Expectancy: Up to 2,200 pages/new toner cartridges Up to 1,000 pages/starter toner cartridge (USA, Canada and some other areas only) (when printing letter size or A4 paper at 5% print coverage) Toner life expectancy will vary depending on the type of average print job.
133SPECIFICATIONS Electrical and Environment Temperature(Allowable) 50 - 90.5° F (10 - 32.5° C) (Storage) 38 - 104° F (3.3 - 40° C) Warm-UpMax. 1 minute at 73.4° F (23° C) First Print20 seconds (when loading Letter size paper for the multi-purpose sheet feeder) Power Source120V AC 50/60Hz (Canadian Version Only) Power ConsumptionOperating (Copying); 160 W or less (25° C) Sleep Mode: 8 W or less Stand by: 30 W or less (25° C) NoiseOperating: 50 dB A or less Stand by: 39 dB A or less HumidityOperating: 35 to 80% (without condensation) Storage: 20 to 80% (without condensation) Dimensions18.0 x 13.2 x 9.9 inches (456 x 334 x 250 mm) Weight18.7 lbs (8.5 kg) Drum Unit: Life Expectancy: Up to 20,000 pages at 20 pages per job Up to 8,000 pages at 1 page per job There are many factors that determine the actual drum life, such as a temperature, humidity, type of paper and toner that you use, the number of pages per print job, etc.
134CHAPTER FIFTEEN Parallel Interface Specifications (Available with Software Option) Interface Connector Printer Side: Amphenol FCN-685J036-L/X or equivalent A shielded cable should be used. Pin Assignment Pin No.Signal DirectionPin No.Signal Direction 1 DATA STROBE Input 190V(S.G.) - 2 DATA 1 Input 200V(S.G.) - 3 DTAT 2 Input 210V(S.G.) - 4 DATA 3 Input 220V(S.G.) - 5 DATA 4 Input 230V(S.G.) - 6 DATA 5 Input 240V(S.G.) - 7 DATA 6 Input 250V(S.G.) - 8 DATA 7 Input 260V(S.G.) - 9 DATA 8 Input 270V(S.G.) - 10 ACKNLGOutput 280V(S.G.) - 11 BUSYOutput 290V(S.G.) - 12 PE Output 300V(S.G.) - 13 SLCT Output 31 INPUT PRIME Input 14 AUTO FEED Input 32 FAULT Output 15 N.C. - 33 N.C. - 16 0V (S.G.) - 34 N.C. - 17 0V (S.G.) - 35 N.C. - 18 +5V - 36 SLCT IN Input
A APPENDIX A (Option) Multi-Function Link Pro Software 135 Setting Up the Fax Machine and Computer to Work Together Your fax machine and computer can work together only if you purchase the optional Multi-Function Link Pro Software. Multi-Function Link Pro turns your fax machine into a 5-in-1 multi-function center, by enabling you to use it as a printer and a scanner and to use it to fax from Windows ¨ applications in your computer. Multi-Function Link Pro does all this without taking over your Personal Computer. Multi-Function Link Pro (MFL Pro) operations run in the background of your PC memory, keeping your personal computer free for other tasks. You can order Multi-Function Link Pro directly from Brother. The item number is PCI-2CD. You can also purchase BrotherÕs bi-directional IEEE-1284 compliant parallel cable, which is designed to comply with the limit for a Class B digital device pursuant to Part 15 of the FCC rules. See ÒOrdering Accessories and SuppliesÓ (UG4558001), p. ii. If you prefer to use a standard shielded printer cable, contact Brother at 1-888-879-3232 (USA) or 1-800-668-2768 (from within Canada); Brother will send you a free filter core to attach to your printer cable. Before you install the optional Multi-Function Link Pro, you must read the README.WRI file in the root directory of the CD-ROM (or Floppy Disks) for important last-minute installation information and troubleshooting Tips.
136APPENDIX A Before You Install the Optional Multi-Function Link Pro Software Installation instructions will be included with PCI-2CD. However, it is important that you hook up your fax machine to your computer before you install the software. If You DonÕt Have a CD-ROM Drive All optional software is supplied on CD-ROM. If you need a Floppy Diskette version, you can order it from Brother. (Only Multi-Function Link Pro and Visioneer PaperPortª LE are available on Floppy Disks, item numbers PCI2D31 (for Windows ¨ 3.1 or 3.11) and PCI2D95 (for Windows¨ 95, 98). If you are using Windows NT¨ Workstation Version 4.0, the software is not available on Floppy Disks.) You must tell the Brother Representative the version of Windows ¨ you are using and your fax machine model number. At the same time, we recommend you order the shielded IEEE 1284 Bi-directional Cable (UG4558001). To order, call Brother at 1-888-879-3232 (USA) or 1-800-668-2768 (from within Canada). Computer Requirements The following are the minimum computer requirements you need to set up and operate the fax machine as a printer. Use only a shielded interface cable that is IEEE-1284 compliant, and that is less than 6.0 feet (1.8 meters) long. CPU 80486/66MHz or higher (Windows ¨ 3.1, 3.11 or 95, 98) Pentium 75 or Higher (Windows NT ¨ Workstation Version 4.0) RAM 8MB or greater for Windows ¨ 3.1 or 3.11 8MB or greater for Windows ¨ 95, 98 (16MB recommended) 16MB or greater for Windows NT ¨ Workstation Version 4.0 (32MB recommended) Hard Disk Drive 50MB Available Disk Space CD-ROM1 Operating System Windows ¨ 3.1, 3.11, 95, 98 or NT¨ Workstation Version 4.0, with your Windows ¨ version
137(OPTION) MULTI-FUNCTION LINK PRO SOFTWARE Connecting the Fax Machine to the Computer When you connect the fax machine to your computer, you must either use BrotherÕs bi-directional IEEE-1284 compliant parallel cable, (UG4558001) ÑORÑGet the free filter core from Brother and attach it to your standard, shielded printer cableÑORÑGet the free filter core from Brother and attach it to your standard printer cable. To order the free filter core, call 1-888-879-3232 (USA) or 1-800-668-2768 (from within Canada) and order item number FCYL2. 1Unplug the fax machine power cord from the electrical outlet before connecting the parallel interface cable. 2Make sure the computer is turned off and unplugged from the electrical power before you connect the interface cable. 3Connect the parallel interface cable to the parallel interface port of the fax machine and secure the wire clips. 4Connect the interface cable to the printer port of the computer and secure with the two screws. For the location of your computerÕs parallel printer port, see the UserÕs Guide for your computer. 5Before plugging in your computer and turn it on, plug in the electrical cord of the fax machine. See Setting Up the Fax Machine and Computer to Work Together p. 135
138APPENDIX A Installing Multi-Function Link Pro Software IMPORTANT To install the optional software using Windows NT¨ Workstation Version 4.0, you must be logged on as the Administrator. After Multi-Function Link Pro is installed, restart Windows NT ¨ a second time and again log in as the Administrator, so you can complete the Remote Setup application. After you have completed Remote Setup, log in using your normal User name. Overview of Basic Steps 1Insert the Brother CD-ROM into your CD-ROM drive. 2Enter the command for your version of Windows¨, if needed. 3Select the software option that suits your needs. 4Follow the installation instructions. See Installing the Brother Software p. 140