Brother Printers Intellifax 1570 Plain Paper Fax Owners Manual

							83
FAX/MFC Activity
You can print the following lists and reports:
1.ACT.REPORTActivity Report lists information
about the last 30 incoming and
outgoing faxes. TX means Transmit;
RX means Receive.
2.ALL DIALLists names and numbers stored in
One Touch and Speed Dial memory,
in numerical order.
3.TEL.INDEXALL DIAL list (above), alphabetically.
4.COVERPAGECheck cover page format.
5.CALL BACK MSGCheck Call Back Message format.
6.USER OPTIONSLists settings for USER OPTIONS,
TEL OPTIONS, SETUP SYSTEM,
SETUP MSG CTR and SETUP MC
PRO.
7.XMIT REPORTYou can print a Transmission
Verification Report after all faxes you
send.
8.MEMORY STATUSLists summary information and
amount of occupied memory.
9.CALLER IDLists Caller ID names/numbers, and
time and date of call.
10
CHAPTER TEN 
						

							84CHAPTER TEN
To print a report
1Press Function, 3.
2Enter the number of the report you want to print.  For example, press 3 to
print the TEL.INDEX.
3Press Start.
4Press Stop to exit.
Activity Report Interval
You can set the FAX/MFC to print activity reports at specific intervals (6, 12, 24
hours, 2, 4, or 7 days).  Even if you set the interval to OFF, you can print the report
at any time by following the steps in the previous section.
1Press Function, 7, 3.  The screen displays the current interval setting.
ACT.RPT.:OFF
2Press  or  to choose your setting.  If you choose 7 days, the screen
prompts you to choose a day at which to begin the 7-day countdown.
3When the screen displays the setting you want, press Set.
4Enter the time to begin printing, in 24-hour format.  (For example, enter
19:45 for 7:45 PM).
5Wait 2 seconds.
6Press Stop to exit.
Transmission Verification (Xmit) Report
You can use the Xmit Report as proof that you sent a fax.  This report lists the
name or fax number of the receiving party, the time and date of transmission,
and if the transmission was successful.
When the feature is OFF, the report is printed automatically only if there’s an error
during transmission.  If the report indicates NG, send the document again.  If the
report indicates you should check the readability of certain pages, resend those pages.
When the feature is ON, the report is printed with every fax you send.
1Press Function, 3, 7.
2Press  or  to select ON (or OFF).
3Press Set.
4Press Stop to exit.
See
FAX/MFC
Activity
p. 83 
						

							85
Standard Telephone and
FCC Notices
These notices are in effect on models
sold and used in the United States only.
This equipment is hearing aid compatible.
When programming emergency numbers and/or making test calls
to emergency numbers:

Remain on the line and briefly explain to the dispatcher the reason for the
call before hanging up.

Perform such activities in the off-peak hours, such as early morning or
late evening.
This equipment complies with Part 68 of FCC Rules. On the rear panel of this
equipment is a label that contains, among other information, the FCC Registra-
tion Number and Ringer Equivalence Number (REN) for this equipment. You
must, upon request, provide this information to your telephone company.
You may safely connect this equipment to the telephone line by means of a
standard modular jack, USOC RJ11C.
An FCC compliant telephone cord with a modular plug is provided with this
equipment. This equipment is designed to be connected to the telephone line or
premises wiring using a compatible modular jack that is Part 68 compliant. See
the Installation section of this manual for details.
11
CHAPTER ELEVEN 
						

							86CHAPTER ELEVEN
The REN is useful to determine the quantity of devices you may connect to your
telephone line and still have those devices ring when your telephone number is
called. In most, but not all areas, the sum of the RENs of all devices connected to
one line should not exceed five (5). To be certain of the number of devices you
may connect to your line, as determined by the REN, you should contact your
local telephone company to determine the maximum REN for your calling area.
If your fax damages the telephone network, the telephone company may discon-
tinue your service temporarily. If possible, they will notify you in advance. But if
advance notice is not practical, you will be notified as soon as possible. You will be
informed of your right to file a complaint with the FCC.
Your telephone company may make changes to its facilities, equipment, opera-
tions or procedures that could affect the proper functioning of your equipment. If
they do, you will be notified in advance to give you an opportunity to maintain
uninterrupted telephone service.
If you experience trouble with this FAX/MFC, please contact Brother Customer
Service for information on obtaining service or repair. The telephone company
may ask that you disconnect this equipment from the line until the problem has
been corrected or until you are sure that the equipment is not malfunctioning.
If you are not able to solve a problem with your FAX/MFC, contact Brother at
USA:1-800-284-4329 (voice)
1-908-575-8790 (fax)
From within Canada:1-800-853-6660 (voice)
1-514-685-4898 (fax)
From within Montreal:1-514-685-6464 (voice)
International Energy Star Compliance Statement
The purpose of the International Energy Star Program is to promote the develop-
ment and popularization of energy-efficient office equipment, which includes
computers, monitors, printers, facsimile receivers and copy machines world-wide.
As an International Energy Star partner, Brother Industries, Ltd. has determined
that this product meets the guidlines of the program. 
						

							87IMPORTANT INFORMATION
WARNING
For protection against the risk of electrical shock, always disconnect all cables
from the wall outlet before servicing, modifying or installing the equipment.
This equipment may not be used on coin service lines provided by the telephone
company or connected to party lines.
Federal Commission Compliance No-
tice (For USA Only)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the fax equipment and the receiver.

Connect the fax equipment on a separate circuit.

Consult with the dealer or an experienced radio/TV technician for help.
Industry Canada Compliance State-
ment (For Canada Only)
This Class  B digital apparatus meets all requirements of the Canadian Interfer-
ence-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement
sur la matériel brouilleur du Canada.
Brother cannot accept any financial or other responsibilities that may be the
result of your use of this information, including direct, special or consequential
damages. There are no warranties extended or granted by this document.
The serial number may be found on the label affixed to the back of the unit. For
your convenience, note the number below and retain this Owner’s Manual to 
						

							88CHAPTER ELEVEN
serve as a permanent record of your purchase, in the event of a theft or fire, or for
future reference.
MODEL NO. FAX 1570MC, MFC 1870MC, MFC 1970MC
(Circle your model number)
SERIAL NUMBER _____________________________
NAME OF DEALER ____________________________
DATE OF PURCHASE __________________________
Important Safety Instructions
1Read all of these instructions.
2Save them for later reference.
3Follow all warnings and instructions marked on the product.
4Unplug this product from the wall outlet before cleaning. Do not use liquid
or aerosol cleaners. Use a damp cloth for cleaning.
5Do not use this product near water.
6Do not place this product on an unstable cart, stand, or table. The product
may fall, causing serious damage to the product.
7Slots and openings in the cabinet and the back or bottom are provided for
ventilation; to ensure reliable operation of the product and to protect it from
overheating, these openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed, sofa, rug, or other
similar surface. This product should never be placed near or over a radiator
or heater. This product should never be placed in a built-in installation
unless proper ventilation is provided.
8This product should be operated from the type of power source indicated on
the label. If you are not sure of the type of power available, consult with your
dealer or local power company.
9This product is equipped with a 3-wire grounding type plug, a plug having a
third (grounding) pin. This plug will fit into only a grounding-type power
outlet. This is a safety feature. If you are unable to insert the plug into the
outlet, contact your electrician to replace your obsolete outlet. Do not defeat
the purpose of the grounding-type plug.
10Do not allow anything to rest on the power cord. Do not place this product
where people can walk on the cord. 
						

							89IMPORTANT INFORMATION
11If an extension cord is used with this product, make sure that the total
ampere ratings on the products plugged into the extension cord do not
exceed the extension cord ampere rating. Also, make sure that the total of all
products plugged into the wall outlet does not exceed 15 amperes (USA only).
12Do not place anything in front of the FAX/MFC that will block received faxes.
Do not place anything in the path of received faxes.
13Do not touch a document during printing.
14Never push objects of any kind into this product through cabinet slots, since
they may touch dangerous voltage points or short out parts resulting in a risk
of fire or electric shock. Never spill liquid of any kind on the product.
15Do not attempt to service this product yourself, as opening or removing
covers may expose you to dangerous voltage points and/or other risks, and
may void your warranty. Refer all servicing to a Brother Authorized Service
Center. A list of Brother Authorized Service Centers has been included for your
convenience, or you may contact the following Customer Service Numbers
for your nearest Brother Authorized Service Center:
USA:1-800-284-4329 (voice)
1-908-575-8790 (fax)
1-800-521-2846 (Fax-Back System)
From within Canada:1-800-853-6660 (voice)
1-514-685-4898 (fax)
1-800-681-9838 (Fax-Back System)
From within Montreal:1-514-685-6464 (voice)
16Unplug this product from the wall outlet and refer servicing to a Brother
Authorized Service Center under the following conditions:
AWhen the power cord is damaged or frayed.
BIf liquid has been spilled into the product.
CIf the product has been exposed to rain or water.
DIf the product does not operate normally when the operating instructions
are followed. Adjust only those controls that are covered by the operating
instructions. Improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician
to restore the product to normal operation.
EIf the product has been dropped or the cabinet has been damaged.
FIf the product exhibits a distinct change in performance, indicating a
need for service.
17To protect your product against power surges, we recommend the use of a
power protection device (Surge Protector). 
						

							90CHAPTER ELEVEN
Notice-Disclaimer of Warranties
BROTHER’S LICENSOR(S) MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING
THE SOFTWARE.  BROTHER’S LICENSOR(S) DOES NOT WARRANT, GUARANTEE
OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF
THE USE OF THE SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY,
RELIABILITY, CURRENTNESS OR OTHERWISE.  THE ENTIRE RISK AS TO THE
RESULTS AND PERFORMANCE OF THE SOFTWARE IS ASSUMED BY YOU.  THE
EXCLUSION OF IMPLIED WARRANTIES IS NOT PERMITTED BY SOME STATES.
THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.
IN NO EVENT WILL BROTHER’S LICENSOR(S), AND THEIR DIRECTORS,
OFFICERS, EMPLOYEES OR AGENTS (COLLECTIVELY BROTHER’S LICENSOR)
BE LIABLE TO YOU FOR ANY CONSEQUENTIAL, INCIDENTAL OR INDIRECT
DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, LOSS OF BUSINESS INFORMATION, AND THE LIKE) ARISING
OUT OF THE USE OR INABILITY TO USE THE SOFTWARE EVEN IF BROTHER’S
LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE
LIMITATIONS MAY NOT APPLY TO YOU.  IN ANY EVENT BROTHER’S
LICENSOR’S LIABILITY TO YOU FOR ACTUAL DAMAGES FROM ANY CAUSE
WHATSOEVER, AND REGARDLESS OF THE FORM OF THE ACTION (WHETHER
IN CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR
OTHERWISE), WILL BE LIMITED TO $50.
Trademarks
The brother logo is a registered trademark of Brother Industries, Ltd.
Brother is a registered trademark of Brother Industries, Ltd.
Visioneer PaperPort is a registered trademark of Visioneer, Inc.
Windows is a registered trademark of Microsoft in the U.S. and other conutries.
All other terms and brand and product names mentioned in this
manual are registered trademarks of their respective companies. 
						

							91IMPORTANT INFORMATION
Compilation and Publication Notice
Under the supervision of Brother Industries Ltd., this manual has been compiled
and published, covering the latest product descriptions and specifications.
The contents of this manual and the specifications of this product are subject to
change without notice.
Brother reserves the right to make changes without notice in the specifications
and materials contained herein and shall not be responsible for any damages
(including consequential) caused by reliance on the materials presented,
including but not limited to typographical and other errors relating to the
publication. 
						

							92CHAPTER ELEVEN