Brother MFC 9840CDW User Manual

Making copies
79
12
Copy options 
(temporary settings)
12
When you want to quickly change the copy 
settings temporarily for the next copy, use the 
temporary Copy keys. You can use different 
combinations.
 
The machine returns to its default settings 
after 60 seconds or if the Mode Timer returns 
the machine to Fax mode. (See Mode 
timeron page 22.)
Changing copy quality12
You can choose from a range of quality 
settings. The default setting is Auto.
„Auto
Auto is the recommended mode for 
ordinary...

Chapter 12
80
To enlarge or reduce the next copy follow the 
instructions below:
aMake sure you are in Copy mode  .
bLoad your document.
cUse the dial pad to enter the number of 
copies (up to 99).
dPress Enlarge/Reduce.
Press c.
eDo one of the following:
„Press a or b to choose the 
enlargement or reduction ratio you 
want.
PressOK.
„Press a or b to choose 
Custom(25-400%).
PressOK.
Use the dial pad to enter an 
enlargement or reduction ratio from 
25% to 400%. (For example, press 
53 to enter 53%.)...

Making copies
81
12
If you are copying from the ADF:12
Insert your document face up in the direction 
shown below:
„2 in 1 (P)
 
„2 in 1 (L)
 
„4 in 1 (P)
 
„4 in 1 (L)
 
If you are copying from the scanner 
glass:
12
Insert your document face down in the 
direction shown below:
„2 in 1 (P)
 
„2 in 1 (L)
 
„4 in 1 (P)
 
„4 in 1 (L)
 
Duplex (2-sided) copying12
If you want to use the “2 sided i 2 sided” or 
“2 sided i 1 sided” copy feature, load your 
document in the ADF.
If you get an Out of Memory...

Chapter 12
82
„2 sided i 1 sided
Portrait
 
Landscape
 
aMake sure you are in Copy mode  .
bLoad your document.
cUse the dial pad to enter the number of 
copies (up to 99).
dPress Duplex and a or b to select 
1sidedi2sided, 
2sidedi2sided or 
2sidedi1sided.
 
Duplex
a1sidedi2sided
2sidedi2sided
b2sidedi1sided
Selectabor OK
PressOK.
ePress Mono Start or Colour Start to 
scan the document.
Note
Duplex copy using a 2-sided legal size 
document is not available.
 
Advanced Duplex copy (short edge)12...

Making copies
83
12
ePress a or b to select 
2sidedi1sided or 
1sidedi2sided. 
PressOK.
 
Duplex Advanced
a2sidedi1sided
b1sidedi2sided
Selectabor OK
fPress Mono Start or Colour Start to 
scan the document.
Note
Duplex copy using a 2-sided legal size 
document is not available from the ADF.
 
Sorting copies using the ADF12
You can sort multiple copies. Pages will be 
stacked in the order 1 2 3, 1 2 3, 1 2 3, and so 
on.
aMake sure you are in Copy mode  .
bLoad your document in the ADF.
cUse the dial pad...

Chapter 12
84
To change the default setting follow the steps 
below:
aPress Menu, 3, 2. 
32.Brightness
-nnonn+
Selectdc&OK
bPress c to make a lighter copy or press 
d to make a darker copy.
PressOK.
cPress Stop/Exit.
Contrast12
Adjust the contrast to help an image look 
sharper and more vivid.
To temporarily change the contrast setting, 
follow the steps below:
aMake sure you are in Copy mode  .
bLoad your document.
cUse the dial pad to enter the number of 
copies (up to 99).
dPress Contrast/Quality....

Making copies
85
12
Tray selection12
You can change the tray use only for the next 
copy.
aMake sure you are in Copy mode  .
bLoad your document.
cUse the dial pad to enter the number of 
copies (up to 99).
dPress Tray Select.
ePress d or c to choose the MP>T1, 
T1>MP, #1(XXX)1 and MP(XXX)1.
PressOK.
fPress Mono Start or Colour Start.
1XXX is the paper size you set in Menu, 1, 3.
Note
• T2 or #2 appears only if the optional paper 
tray is installed.
• To change the default setting for Tray 
Select, see...

Chapter 12
86
 

Section IV
Direct printingIV
Printing photos from a digital camera88
Printing data from a USB flash memory drive92
 

88
13
 
Your Brother machine supports the 
PictBridge standard, allowing you to connect 
to and print photos directly from any 
PictBridge compatible digital camera.
If your camera is using the USB Mass 
Storage standard, you can also print photos 
from a digital camera without PictBridge. 
(See Connecting a camera as a storage 
deviceon page 90.)
Before using 
PictBridge
13
PictBridge requirements13
To avoid errors, remember the following 
points:
„The machine and the digital camera must 
be connected...