Brother HL 7050N User Manual

3 - 37 CONTROL PANEL
HL7050_US_UG_FM5.5
HP-GL Mode
The HP-GL mode is the emulation mode in which this printer 
supports the HP-GL language of the Hewlett-Packard plotter model 
HP-7475A.  Many graphics and CAD applications support this type 
of plotter.  Use this mode so your printer will work when printing from 
those types of applications. 
EPSON FX-850 and IBM Proprinter XL Mode
The EPSON FX-850 and IBM Proprinter XL modes are the emulation 
modes that this printer supports to meet the...

CONTROL PANEL 3 - 38
HL7050_US_UG_FM5.5
List of factory settings
The following table shows the factory settings. 
■The emulation mode affects the setting.  Effective modes 
are shown in brackets in the following table. 
■The following settings cannot be restored to the factory 
settings with the reset menu in the factory settings mode - 
interface mode, HRC setting, page protection, scalable 
font, lock panel, page counter and local language for 
display messages.
■The copy setting is always restored to...

3 - 39 CONTROL PANEL
HL7050_US_UG_FM5.5
SETUP 
(continued)TONER LOWCONTINUE
AUTO CONTINUE=OFF
LOCK PANEL=OFF
REPRINT=ON
PAGE PROTECTION=AUTO
EMULATION=AUTO(EPSON)
KEEP PCL=OFF
JAM RECOVERY=ON
RAMDISK SIZE=0MB
TIME STYLE=YY/MM/DD hh:mm
PRINT MENU MEDIA TYPE=PLAIN PAPER
PAPER=A4/LETTER
COPIES=1
ORIENTATION=PORTRAIT
PRINT POSITIONX OFFSET=0
Y OFFSET=0
AUTO FF TIME=5
FF SUPPRESS=OFF
HP LASERJET
FONT NO.=59
FONT PITCH=10.00/12.00
SYMBOLSET=PC8
AUTO LF=OFF
AUTO CR=OFF
AUTO WRAP=OFF
AUTO SKIP=ON
LEFT...

CONTROL PANEL 3 - 40
HL7050_US_UG_FM5.5
PRINT MENU 
(continued)EPSON FX-850FONT NO.=59
FONT PITCH=10.00/12.00
SYMBOLSET=US ASCIF
AUTO LF=OFF
AUTO MASK=OFF
LEFT MARGIN=####
RIGHT MARGIN=####
TOP MARGIN=####
BOTTOM MARGIN=####
LINES=####
IBM PROPRINTER FONT NO.=59
FONT PITCH=10.00/12.00
SYMBOLSET=PC8
AUTO LF=OFF
AUTO CR=OFF
LEFT MARGIN=####
RIGHT MARGIN=####
TOP MARGIN=####
BOTTOM MARGIN=####
LINES=####
HP-GLCHAR SET(STD)=####
CHAR SET(ALT)=####
PEN # SIZE
PEN # GRAY
BR-SCRIPTERROR PRINT=OFF
NETWORK...

3 - 41 CONTROL PANEL
HL7050_US_UG_FM5.5
NETWORK
(continued)TCP/IP
(continued)IP BOOT TRIES=3
IP METHOD=AUTO
NETWARENETWARE ENABLE=ON
NET FRAME=AUTO
APPLETALK=ON
NETBEUI=ON
DLC/LLC=ON
BANYAN=ON
LAT=ON
NETBIOS/IP=ON
APIPA=OFF
ENET=AUTO
INTERFACE SELECT=AUTO
AUTO IF TIME=5
INPUT BUFFER=LEVEL 3
PARALLELHIGH SPEED=ON
BI-DIR=ON
RS-232CFAX MODE=OFF
BAUD RATE=9600
CODE TYPE=8 BITS
PARITY=NONE
STOP BIT=1 BITS
X ON/X OFF=ON
DTR(ER)=ON
ROBUST XON=OFF
RING DELAY=0
REDUCTION=AUTO
RAM SIZE=1MB
RECEIVE=ON
INTERVAL=OFF...

CONTROL PANEL 3 - 42
HL7050_US_UG_FM5.5
For visually-impaired users
Braille symbols
The control panel buttons are marked with Braille characters for 
visually-impaired users as shown in the table.
*Braille indicates the first 2 or 3 letters of the English button name. 
For example, Job Cancel is shown as “can” and + (Plus) is shown 
as “plu” in Braille.
ButtonAbbreviationsBraille*
GoGo
Job CancelCan
ReprintRep
+Plu
-Min
SetSet
BackBac
 

3 - 43 CONTROL PANEL
HL7050_US_UG_FM5.5
Buzz indications
The control panel has a buzzer. The buzzer will sound when one of 
the control panel buttons is pressed, or the status of the printer 
changes. See the table for a description of the buzzer meaings.
You can change the settings of the buzzer by using the buttons on 
the control panel. 
To chagne the setting of the buzzer, press the + (plus) button until 
SETUP is displayed, then press the Set button. Press the + (plus) 
button until ERROR BUZZER,...

4 - 1 OPTIONS
4
HL7050_US_UG_FM5.5
4Options
Optional accessories and supplies
This printer has the following optional accessories. You can increase 
the capabilities of the printer with these items.
Options   
Lower tray unit(Three paper trays)Duplex unit Mailbox unit Network board 
(For HL-7050 only)
LT-7000 DX-7000 MX-7000 series NC-4100h
see 4-3 see 4-4 see 4-6 see 4-8
CompactFlash card DIMM memory HDD  Ir-DA interface
HD-EX IR-1000
see 4-11 see 4-13 see 4-17 see 4-21
Optional font package Optional...

4 - 2 OPTIONS
HL7050_US_UG_FM5.5
Small pad for lower tray unit and 
stabilizer (SB-4000)
When you have the following printer options, you must install the 
small pads or the optional stabilizer. 
1 Lower tray 2 Lower trays 3 Lower trays
Non-mailbox unit
--------------------
Mailbox unit 
(5 bins)
--------------------
Mailbox unit 
(10 bins)
--------------------
 

OPTIONS 4 - 3
HL7050_US_UG_FM5.5
Lower-tray unit (LT-7000)
The lower-tray unit (Trays 2/3/4) is an optional device that can hold 
extra paper. It can hold up to 500 sheets of paper (80 g/m2 or 20 lb) 
in each tray. When all three trays are installed, the printer can hold 
up to 2100 sheets of plain paper. If you want to buy an optional 
lower-tray unit, call the dealer you bought the printer from.  
Expands up to a total of 2100 sheets
Figure 4-1
To install the lower-tray unit, please see the Users Guide...