Brother HL 7050N User Manual

4 - 4 OPTIONS
HL7050_US_UG_FM5.5
Duplex unit (DX-7000)
The Duplex unit is an optional device that allows you to print on both 
sides of a piece of paper.  When it is installed, you can select either 
duplex printing or simplex printing on the control panel or with a 
software command.  For more information about the control panel, 
see PAPER menu in Chapter 3.
To install the duplex unit, please see the Users Guide that we have 
supplied with the Duplex unit.  
Figure 4-2
Guidelines for printing on both...

OPTIONS 4 - 5
HL7050_US_UG_FM5.5
Paper orientation for printing on both sides of the paper
The printer prints the second page first.
If you print 10 pages onto 5 piece of paper, it will print page 2 then 
page 1 on the first piece of paper.
It will print page 4 then page 3 on the second piece of paper.
It will print page 6 then page 5 on the third piece of paper, and so on.
When doing duplex printing, the paper must be put into the paper tray 
in the following way:
■For the multi-purpose (MP) tray.
Put...

4 - 6 OPTIONS
HL7050_US_UG_FM5.5
Mailbox unit
The Mailbox unit is an optional device that can be installed on the 
HL-7050 laser printer to allow you to direct your printouts to any bin 
that you want.   
Figure 4-3
To install the Mailbox unit, please see the Users Guide that we have 
supplied with the Mailbox.  
Mailbox
This setting allows you to direct your printouts to any bin that you 
specify.
 

OPTIONS 4 - 7
HL7050_US_UG_FM5.5
Sorter
When you want to print a lot of copies of a document, you can print 
each copy and direct it to the bin that you want. You will not have to 
sort the copies after printing them.
Stacker
You can print large print jobs when no one is in the office. You can 
print 100 sheets of plain paper to each bin of the mailbox. When you 
remove bins 2, 4, 7 and 9, the total output increases to 1900 sheets 
(including the printer output tray). 
 

4 - 8 OPTIONS
HL7050_US_UG_FM5.5
Network option NC-4100h 
(For HL-7050 only)
Installing the Brother network board (NC-4100h) allows you to use 
the printer in the TCP/IP, IPX/SPX, AppleTalk, DLC/LLC, Banyan 
VINES, DEC LAT and NetBEUI. Many useful features, such as 
BRAdmin Professional for the administrator and Brother network 
printing software, are included on the CD-ROM supplied with the 
HL-7050 printer.
For setup, see the Network Users Guide.
Installing the Network board  
1Turn off the printer...

OPTIONS 4 - 9
HL7050_US_UG_FM5.5
3Loosen the three screws, and then remove the metal plate by 
lifting up slightly.  
Figure 4-5
4Unscrew the two screws, and then remove the Network cover 
plate. 
Figure 4-6
 

4 - 10 OPTIONS
HL7050_US_UG_FM5.5
5Put the network board connector firmly into the connector of the 
main controller board, and then secure it with the two screws.
Figure 4-7
6Secure the metal plate with the three screws.  
Figure 4-8
7Close the side cover. 
8Connect one end of the Ethernet Cable to the Network port of 
the printer. 
9Plug the printer back in, and then turn on the power switch.  
10For details about how to use the Network board, please see the 
Network Users Guide on the CD-ROM that we...

OPTIONS 4 - 11
HL7050_US_UG_FM5.5
CompactFlash card 
This printer has a slot for an optional CompactFlash card, which is a 
memory card. 
If you install an optional CompactFlash memory card, you can save 
macros, the print log and fonts on it. This card lets you select the 
Reprint functions through the network.  
You can install the following types of CompactFlash memory cards.

Type I
■16 MB  SDCFB-16-801
■32 MB  SDCFB-32-801
■64 MB  SDCFB-64-801
■96 MB  SDCFB-96-801
■128 MB  SDCFB-128-801
■192 MB...

4 - 12 OPTIONS
HL7050_US_UG_FM5.5
Installing the CompactFlash card 
Follow these steps to install or remove a card:  
1Turn off the printer power switch, and then unplug the printer.   
2Insert a CompactFlash card into the slot with the label facing to 
the left. 
Make sure you put it in properly.  
Figure 4-9
Before you remove the card, turn the power switch OFF, and 
then unplug the printer.  To remove the card, pull it out of the 
printer. 
 

OPTIONS 4 - 13
HL7050_US_UG_FM5.5
RAM expansion
The HL-7050 and HL-7050N printer have 32 MB of standard memory 
and two slots for optional memory expansion. You can expand the 
memory up to 288 MB by installing dual in-line memory modules 
(DIMMs). (The standard memory varies depending on the printer 
model and country.)
You can install the following DIMMs:    

■16 MB  Techworks 12456-0001
■32 MB Techworks 12457-0001
■64 MB  Techworks 12458-0001
■128 MB  Techworks 12459-0001

■16 MB  Buffalo Technology...