Brother HL 6050D User Manual
Have a look at the manual Brother HL 6050D User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 331 Brother manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
3 - 10 CONTROL PANEL LCD message Printer status messages The following table shows the printer status messages that are displayed during normal operation: Printer Status MessageMeaning IGNORE DATAPrinter is ignoring data processed using PS driver. JOB CANCELLINGCancelling the job. NOW INITIALIZINGThe printer is setting up. PAUSEThe printer has suspended its operations. Press the Go button to start the printer again. PRESS SET TO PRINTPress the Set button to start printing. PRINTINGPrinting. PROCESSINGBusy processing data. PROGRAMING-WAITAccessing CompactFlash ® card. RAM SIZE=XX MBThis printer has XX MB memory. READYReady to print. RESET TO FACTORY SETTINGSThe printer settings returns to the factory settings. RESET TO USER SETTINGSThe printer settings returns to the user settings. RESOLUTION ADAPTPrinting with reduced resolution. SELF TESTPerforming self-diagnostics. SLEEPIn Sleep state WARMING UPThe printer is warming up.
CONTROL PANEL 3 - 11 How to use the control panel When you use the Menu buttons (+, -, Set or Back), remember the following basic steps: ■If no control panel operations are performed for 30 seconds, the LCD automatically returns to READY. ■When you press the Set button to choose a setting, an asterisk appears at the end of the display for a short time. After that, the display returns to the previous menu level. ■After changing the status or a setting, pressing the Back button before you press the Set button will cause the display to return to the previous menu level with the original settings unchanged. ■There are two ways to input numbers. You can press + or - to scroll up or down one number at a time, or you can hold down + or - to scroll faster. The blinking number is the one that you can change.
3 - 12 CONTROL PANEL For example: If you feed paper from the MP tray as a priority, change the MP FIRST setting to ON as follows. The default setting is OFF. Turn this setting ON if you want to. Press any of the Menu buttons (+, -, Set or Back) to take the printer offline. Press the + or - button to move forward or backward through the menus until PAPER is displayed. Press the Set button to move to the next menu level. Press the + or - button. Press the Set button. Press the + button. Press Set button. An asterisk * briefly appears at the end of the display. The default setting is indicated by an * READY INFORMATION PAPER SOURCE MP FIRST =OFF * =ON =ON *
CONTROL PANEL 3 - 13 Control Panel LCD menu ■Standard paper tray: TRAY 1 ■Multi-purpose tray: MP TRAY ■Optional lower tray: TRAY 2 There are eight menus. For more information about the selections available in each menu, please see the pages listed below. ■INFORMATION See INFORMATION on page 3-14. ■PAPER See PAPER on page 3-15. ■QUALITY see QUALITY on page 3-15. ■SETUP See SETUP on page 3-16. ■PRINT MENU See PRINT MENU on page 3-17. ■NETWORK See NETWORK (only on a Network) on page 3-20. ■INTERFACE See INTERFACE on page 3-21. ■RESET MENU See RESET MENU on page 3-21. The control panel LCD names for the paper trays are as follows.
3 - 14 CONTROL PANEL INFORMATION Display ShowsDescription PRINT SETTINGSPrints the print settings page. PRINT TESTPrints the test page. PRINT DEMOPrints the demonstration sheet. PRINT FILE LISTPrints the list of data saved in the CompactFlash ® card or in the embedded memory when the CompactFlash® card has not been installed. PRINT FONTSPrints the font list and samples. VERSIONSubsetting Description SER.NO=#########Shows printer serial number. ROM VER=####Shows ROM version. ROM DATE=##/##/##Shows ROM date. NET VER=####Shows network version (only Network users). RAM SIZE=###MBShows the size of memory in this printer. MAINTENANCE PAGE COUNTER =######Shows the current total printed pages. DRUM COUNT =######Shows the pages printed with drum unit. REMAIN DRUM =######Shows the pages left to print with drum unit. REMAIN PF KIT MP =######Shows the pages left to print with PF kit MP. REMAIN PF KIT 1 =######Shows the pages left to print with PF kit 1. REMAIN PF KIT 2 =######Shows the pages left to print with PF kit 2. REMAIN FUSER =######Shows the pages left to print with fuser unit. REMAIN LASER =######Shows the pages left to print with laser unit.
CONTROL PANEL 3 - 15 PAPER Display ShowsDescription SOURCE=AUTO/MP/TRAY1/TRAY2 Selects which paper tray the paper will be fed from. PRIORITY=MP>T1>T2 T1>T2>MP T1>T2 MP FIRST=ON/OFF Selects whether to feed paper from the MP tray as a priority. MP SIZE=ANY/LETTER/LEGAL/A4... Selects the size of paper you loaded in the MP tray, for example, A4/Letter/Legal/... MANUAL FEED=OFF/ON Select whether or not you want to feed paper manually. TRAY1 SIZE=LETTER/LEGAL/A4... Selects the size of paper you loaded in the standard upper tray, for example, A4/Letter/Legal/... TRAY2 SIZE=LETTER/LEGAL/A4... Selects the size of paper you loaded in the optional lower tray, for example, A4/Letter/Legal/... DUPLEX=OFF/ON(LONG BIND)/ON(SHORT BIND) Select whether you want to automatically print on both sides of the paper. QUALITY Display ShowsDescription RESOLUTION=300/600/1200 You can select a print resolution of 300, 600 or 1200 dpi (dots per inch). HRC=MEDIUM/DARK/OFF/LIGHT HRC: High Resolution Control (HRC) offers improved print quality of letters, numbers and graphics that conventional laser printers cannot achieve, with a resolution of 300 or 600 dpi. TONER SAVE=OFF/ON DENSITY=-6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6 Increases or decreases the print density.
3 - 16 CONTROL PANEL SETUP Display ShowsDescription LANGUAGE= ENGLISH /FRANÇAIS /... PANEL CONTROLSubsetting Description LCD DENSITY =0/1/2 AUTO ONLINE =ON/OFF BUTTON REPEAT Sets the time for the display message to change when holding the + or - button at intervals of: 0.1, 0.2, 0.3, 0.4, 0.5, 1.0, 1.5 or 2.0 seconds. The factory setting is 0.1. MESSAGE SCROLL Sets the time in seconds that an LCD message will scroll across the display. From Level 1=0.2 to Level 10=2.0. The factory setting is Level 1. ERROR BUZZEROFF NORMAL There will be a set of five Buzzes when an error occurs. SPECIAL Buzzes five times consecutively until the error is cleared. PANEL BUZZEROFF Disables buzz function when you press the button. ON Enables buzz function when you press the button. BUZZER VOLUMELOW Makes the buzz lower. HIGH Makes the buzz higher. POWER SAVE TIME=1, 2, 3, 4, 5 ... 240 MIN AUTO CONTINUE=OFF/ON LOCK PANEL=OFF/ON Turns the lock panel settings ON or OFF. PASS NO.=### REPRINT=ON/OFF PAGE PROTECTIONPROTECT = AUTO AUTO, OFF, LETTER, A4,LEGAL EMULATION=AUTO (EPSON)/AUTO (IBM)/HP LASER JET/.... KEEP PCL=OFF/ON RAMDISK SIZE=0, 1, 2 ... MB RESTART PRINTER? DELETE STORAGEDeletes the data in CompactFlash ® card. Subsetting Description SECURE FILE Selects the user name, job name and password. PUBLIC FILE Selects the user name and job name. PROOF FILE Selects the user name and job name. DATA ID (CF) =#### MACRO ID (CF) =#### FONT ID (CF) =#### FORMAT (CF) OK? DATA ID (ROM) =#### MACRO ID (ROM) =#### FONT IT (ROM) =#### FORMAT (ROM) OK?
CONTROL PANEL 3 - 17 PRINT MENU Display ShowsDescription MEDIA TYPE=PLAIN PAPER, TRANSPARENCIES, THICK PAPER, THICKER PAPER, THIN PAPER, BOND PAPER, ENVELOPES, ENV.THIN, RECYCLED PAPER PAPERSets the paper size to LETTER, A4, LEGAL, FOLIO, EXECUTIVE, COM-10, MONARCH, C5, DL, DLL, B5, A5, A6, B6, JIS B5, A4 LONG, POST CARD, ORGANIZER J, ORGANIZER K, ORGANIZER L, ORGANIZER M COPIESYou can check the total number of printed pages. Shows the number of printed pages (1 to 999). ORIENTATIONThis printer can print pages in portrait or landscape orientation. PORTRAIT or LANDSCAPE PRINT POSITIONThis printer can be adjusted to align the page format. Subsetting Description X OFFSET=0=-500, -499 ... + 499, +500 Moves the print start position (at the top-left corner of pages) horizontally up to -500 (left) to +500 (right) dots in 300 dpi. Y OFFSET=0=-500, -499 ... + 499, +500 Moves the print start position (at the top-left corner of pages) vertically up to -500 (up) to +500 (down) dots in 300 dpi. AUTO FF TIME=OFF/1, 2, 3 ... 99 (sec) Allows you to print the remaining data without pressing the Go button. FF SUPPRESS=OFF/ON Turns the feed suppress (PAUSE) setting ON or OFF. HP LASERJETSubsetting Description FONT NO.=I000 ... #### FONT PITCH/POINT=##.## SYMBOL SETPC-8/... Sets the symbol set or the character set. TABLE PRINTPrints code table. AUTO LF=OFF/ON ON: CR → CR+LF, OFF: CR → CR AUTO CR=OFF/ON ON: LF LF+CR, FF+CR, or VT → VT+CR OFF: LF → LF, FF → FF, or VT → VT AUTO WRAP=OFF/ON Selects whether a line feed and carriage return will happen when the printer reaches the right margin. AUTO SKIP=ON/OFF Selects whether a line feed and carriage return will happen when the printer position reaches the bottom margin. LEFT MARGIN=## Sets the left margin at column 0 to 70 columns at 10 cpi.
3 - 18 CONTROL PANEL HP LASERJET (continued)Subsetting Description RIGHT MARGIN=## Sets the right margin at column 10 to 80 columns at 10 cpi. TOP MARGIN=#.## Sets the top margin at a distance from the top edge of the paper: 0, 0.33, 0.5, 1.0, 1.5 or 2.0. The factory setting is 0.5. BOTTOM MARGIN=#.## Sets the bottom margin at a distance from the bottom edge of the paper - 0, 0.33, 0.5, 1.0, 1.5 or 2.0. The factory setting is 0.33(None-HP), 0.5(HP). LINES=### Sets the number of lines on each page from 5 to 128 lines. EPSON FX-850 FONT NO.=I000 ... #### FONT PITCH/POINT=##.## CHARACTER SETPC-8/... Sets the symbol set or the character set. TABLE PRINTPrints code table. AUTO LF=OFF/ON ON: CR → CR+LF OFF: CR → CR AUTO MASK=OFF/ON LEFT MARGINSets the left margin at column 0 to 70 columns at 10 cpi. RIGHT MARGINSets the right margin at column 10 to 80 columns at 10 cpi. TOP MARGINSets the top margin at a distance from the top edge of the paper - 0, 0.33, 0.5, 1.0, 1.5 or 2.0. The factory setting is 0.33. BOTTOM MARGINSets the bottom margin at a distance from the bottom edge of the paper - 0, 0.33, 0.5, 1.0, 1.5 or 2.0. The factory setting is 0.33. LINESSets the number of lines on each page from 5 to 128 lines. PRINT MENU (Continued) Display ShowsDescription
CONTROL PANEL 3 - 19 IBM PROPRINTERSubsetting Description FONT NO.=I000 ... #### FONT PITCH=##.## CHARACTER SETPC-8/... Sets the symbol set or the character set. TABLE PRINTPrints code table. AUTO LF=OFF/ON ON: CR → CR+LF, OFF: CR → CR AUTO CR=OFF/ON AUTO MASK=OFF/ON LEFT MARGINSets the left margin at column 0 to 70 columns at 10 cpi. RIGHT MARGINSets the right margin at column 10 to 80 columns at 10 cpi. TOP MARGINSets the top margin at a distance from the top edge of the paper - 0, 0.33, 0.5, 1.0, 1.5 or 2.0. The factory setting is 0.33. BOTTOM MARGINSets the bottom margin at a distance from the bottom edge of the paper - 0, 0.33, 0.5, 1.0, 1.5 or 2.0. The factory setting is 0.33. LINESSets the number of lines on each page from 5 to 128 lines. BR-SCRIPT3 ERROR PRINT=OFF/ON CARBON MENU CARBON COPYOFF/ON/AUTO/PARALLEL COPIES=1 to 8 COPY 1 TRAY=AUTO/REMAINING, MP TRAY, TRAY1, TRAY2 COPY 1 MACRO=(ID number) COPY 2 TRAY . . . COPY 8 TRAY=AUTO/REMAINING, MP TRAY1, TRAY2 Appears when printing 2 pages or more. COPY 2 MACRO . . . COPY 8 MACRO=(ID number) Appears when printing 2 pages or more. PRINT MENU (Continued) Display ShowsDescription