Brother Hl 3040cn User Manual

							Driver and Software
61
2
Advanced tab
 

Color Mode
You can change the color mode as follows:
Normal
This is the Default color mode.
 Vivid
The color of all elements are adjusted to become a more vivid color.
 None

Enhance Black Printing
If a black graphic cannot be printed correctly, choose this setting.

Improve Gray Color
You can improve the image quality of shaded areas by ticking the Improve Gray Color check box.
 
						

							Driver and Software
62
2

Improve Print Output
This feature allows you to improve a print quality problem.
 Reduce Paper Curl
If you choose this setting, the paper curl may be reduced.
If you are printing only a few pages, you do not need to choose this setting. We recommend that you 
change the printer driver setting in Media Type to a thin setting.
Note
This operation make the temperature of the printer’s fusing process lower.
 
 Improve Toner Fixing
If you choose this setting, the toner fixing on paper may be improved. If this selection does not provide 
enough improvement, select Thicker paper in Media type settings.
Note
This operation make the temperature of the printer’s fusing process upper.
 

Sleep Time
When the printer does not receive data for a certain period of time, it enters sleep mode. In sleep mode, 
the printer acts as though it were turned off. When you choose Printer Default the timeout setting has 
been set to a specific time set at the factory, this can be altered in the driver or at the printer. If you want 
to change the sleep time, choose Manual and then enter the time in the text box on the driver. 
While the printer is in sleep mode, the LCD shows Sleep, but the printer can still receive data. Receiving 
a print file or document or pressing Go will automatically wake up the printer to start printing
 
						

							Driver and Software
63
2
Manual Duplex Printing2
Select Paper Handling.

For Mac OS X 10.3.9 and 10.4.x
Choose Odd numbered pages. Turn the paper over and reload it in the tray, and then choose 
Even numbered pages and print.
 

For Mac OS X 10.5.x
Choose Odd only and print. Turn the paper over and reload it in the tray, and then choose Even only and 
print.
 
 
						

							Driver and Software
64
2
Status Monitor (For Mac OS X 10.3.9 or greater users)2
This reports the printer status (any errors that may happen with the printer) when printing. If you would like to 
turn the status monitor on, follow these steps:

For Mac OS X 10.3.9 and 10.4.x
aRun the Printer Setup Utility (from the Go menu, choose Applications, Utilities), then choose the 
printer.
bClick the Utility, then the status monitor will start up.

For Mac OS X 10.5.x
aRun the System Preferences, select Print & Fax, then choose the printer.
bClick the Open Print Queue..., then click the Utility. The status monitor will start up.
 
						

							Driver and Software
65
2
Using the BR-Script3 printer driver
(Post Script
® 3™ language emulation for Macintosh) 
(HL-3070CW only )
2
Note
 To use the BR-Script3 printer driver on a Network, see the Network User’s Guide on the CD-ROM. 
 To use the BR-Script3 printer driver, you need to set the Emulation to BR-Script3 by using the control 
panel before connecting the interface cable. (See Print Menu on page 85.)
 
Installing the BR-Script3 printer driver 2
You need to install the BR-Script3 printer driver using the following instructions. 
Note
If you use a USB cable, only one printer driver per printer can be registered in the Printer Setup Utility. 
Before installing the BR-Script3 printer driver, delete from the Printer list any other Brother drivers that are 
for the same printer.
 

For Mac OS X 10.3.9 and 10.4.x
aTurn on your Macintosh.
bFrom the Go menu choose Applications.  
 
						

							Driver and Software
66
2
cOpen the Utilities folder.  
dDouble-click the Printer Setup Utility icon. 
eClick Add.  
For Mac OS X 10.3.9 users, go to f. 
For Mac OS X 10.4.x users, go to g. 
 
						

							Driver and Software
67
2
fChoose USB.  
gChoose the printer name and make sure that Brother is shown in Printer Model (Print Using). 
Select the printer name that shows BR-Script in the Model Name (Model), and then click Add.
For Mac OS X 10.3.9 users:
 
For Mac OS X 10.4.x users: 
 
						

							Driver and Software
68
2
hFrom the Printer Setup Utility menu, choose Quit Printer Setup Utility.

For Mac OS X 10.5.x
aFrom the Apple menu choose System Preferences. 
bClick Print&Fax.     
 
						

							Driver and Software
69
2
cClick + which is located below the Printers section. 
dChoose the Printer Name and choose Select a driver to use in Print Using, and then choose the 
Printer Name that shows BR-Script in model name, and then click Add.
 
eQuit System Preferences.
 
						

							Driver and Software
70
2
Uninstalling the printer driver2
You can uninstall the printer driver that you have installed with the following steps.
Note
 This is not available if you installed the printer driver from the Windows Add a printer function.
 After uninstalling, we recommend that you restart your computer to remove files that were in use during 
the uninstall.
 
Printer driver for Windows®, Windows Vista® and Windows Server® 2003/20082
For Windows® XP/XP Professional x64 Edition, Windows Vista® and Windows Server®2003/2008 
/Server
® 2003 x64 Edition2
aClick the Start button, point to All Programs1, Brother and then to your printer name.
bClick UnInstall.
cFollow the instructions on the screen.
1P rogram for Windows® 2000 use rs