Brother Hl 3040cn User Manual

Control  Panel
81
3
gPress OK or Go. 
Printing
h
 
Ready
Deleting secure data3
Choose the user name and the job you want to delete in steps a to d, and then choose Delete (instead of 
Print) in step e.
Canceling the secure data job (printing secure data)3
If you want to cancel the current secure print job, press Cancel. Cancel also allows you to cancel a paused 
secure print job.
 

Control  Panel
82
3
Using the control panel LCD menu3
When you use the Menu keys (+, -, OK or Back), remember the following basic steps:

If no control panel operations are performed for 30 seconds, the LCD automatically returns to Ready.

When you press OK to choose a setting, Accepted appears on the LCD. After that, the LCD returns to 
the previous menu level.

When you press Go to choose a setting, Accepted appears on the LCD. After that, the LCD returns to 
the Ready state.

After changing the status...

Control  Panel
83
3
Menu table3
There are nine menus. For more information about the selections available in each menu, see the tables 
below.
Note
The control panel LCD names for the paper trays are as follows.
 Standard paper tray: Tray1
 Manual feed slot: Manual Feed
 
Machine Info.
Submenu Menu Selections Options Descriptions
Print SettingsPrints the Printer Settings page.
Print NetSettingPrints only the Network Settings page.
Test PrintPrints the test page.
Demo PrintPrints the demonstration...

Control  Panel
84
3
Drum Count Black(K)Shows the current total pages printed for black drum 
unit.
Cyan(C)Shows the current total pages printed for cyan drum 
unit.
Magenta(M)Shows the current total pages printed for magenta 
drum unit.
Yellow(Y)Shows the current total pages printed for yellow 
drum unit.
Parts Life Drum Life Black(K)Shows the remaining life for the black drum unit.
Cyan(C)Shows the remaining life for the cyan drum unit.
Magenta(M)Shows the remaining life for the magenta drum unit....

Control  Panel
85
3
General Setup
Submenu Menu Selections Options Descriptions
Local LanguageEnglish*/Français... Changes the LCD language for your 
country.
Ecology Sleep Time 0/1/2/3/4/5*...MinSets the time to return to Power Save 
mode.
Toner SaveOff*/OnIncreases the page yield of the toner 
cartridge.
Panel Control Button Repeat0.1*/0.4/0.6/0.8/1.0/1.4
/1.8/2.0 SecSets the time for the LCD message to 
change when holding + or - at 
intervals.
Message ScrollLevel 1*/Level 
2.../Level 10Sets the time...

Control  Panel
86
3
Paper
(HL-3070CW only)Letter*/Legal/A4/ 
Executive/Com-10/DL/JI
SB5/B5/A5/A5 L/JIS B6/
B6/A6/Monarch/C5/A4 Lon
g/Folio/DL L/HagakiSets the size of paper.
Copies
(HL-3070CW only)1*/2.../999Sets the number of printed pages.
Orientation
(HL-3070CW only)Portrait*/LandscapeThis printer can print pages in portrait 
or landscape orientation.
Print Position X Offset -500/-499.../0*.../499/
500DotsMoves the print start position (at the 
top-left corner of pages) horizontally 
up to -500 (left)...

Control  Panel
87
3
HP LaserJet
(HL-3070CW only)Font No. I000.../I059*.../I071
Font Pitch 0.44/10*.../99.99
Font Point 4.00/12*.../999.75
Symbol SetPC-8*... Sets the symbol set or the character 
set.
Table PrintPrints code table. If Change 
Emulation appears on the LCD, 
choose Auto or HP LaserJet in 
Emulation of Print Menu.
(See page 85.)
Auto LFOff*/OnON: CR i CR+LF,OFF: CR i CR
Auto CROff*/OnON: LFiLF+CR, FFiFF+CR, or VT i 
VT+CR OFF: LF i LF, FF i FF, or VT 
i VT
Auto WRAPOff*/OnChooses whether a...

Control  Panel
88
3
1On conne ctio n to the  netwo rk, if the  machine s Boo t Metho d is Auto the  ma chine will atte mpt to a utomatically  set the IP a ddress and Subnet 
Ma sk from a  bo o t serv e r such a s DHCP or BOOTP. If a  boo t serve r canno t be found, an APIPA IP address will be allocated, such as 169. 254. 
[001-254]. [000-255]. If the Boot Method of the machine is set to Static you will need to manually enter an IP address from the machine s co ntrol 
panel.
Network for HL-3040CN users...

Control  Panel
89
3
Network for HL-3070CW users
Submenu 1 Submenu 2 Menu Selections Options Descriptions
Wired LAN TCP/IP Boot MethodAuto*/Static/RARP/BOOTP
/DHCPChoose the IP method that best 
suits your needs.
IP Address ###.###.###.###
(000.000.000.000)*
1
Enter the IP address.
Subnet Mask ###.###.###.###
(000.000.000.000)*
1
Enter the Subnet mask.
Gateway ###.###.###.###
(000.000.000.000)*Enter the Gateway address.
IP Boot Tries ##### (3*)
APIPAOn*/OffAutomatically allocates the IP 
address from the...

Control  Panel
90
3
1On conne ctio n to the  netwo rk, if the  machine s IP METHOD is AUTO the ma chine will a tte mpt to automa tica lly  set the IP a ddress and Subnet 
Ma sk from a  bo o t serv e r such a s DHCP or BOOTP. If a  boo t serve r canno t be found an APIPA IP address will be allocated, such as 
169.254.[001-254].[000-255]. If the IP METHOD of the ma chine is set to STATIC y ou will ne ed to  manua lly enter an IP address from the  
m a ch in e  s co nt ro l  pa ne l.
WLAN  
Status
(Appears...