Brother Hl 3040cn User Manual

Driver and Software
71
2
Printer driver for Macintosh2
For Mac OS X 10.3.9 and 10.4.x 2
aDisconnect the USB cable between the Macintosh and your printer.
bRestart the Macintosh.
cLog on as an ‘Administrator’.
dRun the Printer Setup Utility (from the Go menu, choose Applications, Utilities), then choose the 
printer you want to remove and remove it by clicking the Delete button.
eRestart the Macintosh.
For Mac OS X 10.5.x
2
aDisconnect the USB cable between the Macintosh and your printer.
bRestart the...

Driver and Software
72
2
Software2
Software for networks 2
BRAdmin Light2
BRAdmin Light is a utility for initial setup of Brother network connected devices. This utility can search for 
Brother products on your network, view the status and configure basic network settings, such as IP address. 
The BRAdmin Light utility is available for Windows
® 2000/XP, Windows Vista® and Windows Server® 
2003/2008 and Mac OS X 10.3.9 (or greater) computers. For installing BRAdmin Light on Windows
®, please 
see the...

Driver and Software
73
2
BRPrint Auditor (for Windows®)2
The BRPrint Auditor software brings the monitoring power of Brother network management tools to locally 
connected machines. This utility allows a client computer to collect usage and status information from a 
machine connected via the USB interface. The BRPrint Auditor can then pass this information to another 
computer on the network running BRAdmin Professional 3 or Web BRAdmin 1.45 or greater. This allows the 
administrator to check items such...

Driver and Software
74
2
About emulation modes (HL-3070CW only)2
This printer has the following emulation modes. You can change the setting by using the control panel or Web 
Based Management (Web browser).

HP LaserJet Mode
The HP LaserJet mode (or HP mode) is the emulation mode in which this printer supports the PCL6 
language of the Hewlett-Packard LaserJet laser printer. Many applications support this type of laser 
printer. Using this mode will allow your printer to run at its best with those...

75
3
3
Control panel3
This printer has one back lit Liquid Crystal Display (LCD), seven buttons and two Light Emitting Diodes 
(LEDs) on the control panel. The LCD is a 16 character single line display.
 
The illustration is based on HL-3070CW.
Buttons 3
You can control the basic printer operations and change various printer settings with eight buttons (Go, 
Cancel, Secure Print, +, -, Back, OK).
Control Panel3
buttonOperations
GoClear error messages.
Pause and continue printing.
Switch to Reprint mode....

Control  Panel
76
3
Go3
You can pause printing by pressing Go. Pressing Go again restarts the print job. During a pause, the printer 
is offline.
Pressing Go allows you to choose the displayed option in the last menu level. After changing a setting, the 
printer returns to the Ready state. 
If Data remains in the printer memory, pressing Go will print that remaining data.
You can clear some error indications by pressing Go. Follow the control panel instructions or see 
Troubleshooting on page 142 to...

Control  Panel
77
3
Back3
Pressing Back when the printer is in the Ready state takes it offline, and the LCD will show the control panel 
menu.
Pressing Back allows you to return to the previous level from the current menu level.
Back also allows you to choose the previous digit while setting numbers.
When you choose a setting and it does not have an asterisk (OK was not pressed), Back allows you to return 
to the previous menu level with the original setting unchanged.
OK3
Pressing OK when the printer...

Control  Panel
78
3
Back light (HL-3070CW only )3
LCD messages3
The message on the LCD shows the current printer status during normal operation.
 
Ready         
The   mark indicates the wireless signal strength with four levels. (   means no signal,   means weak,   
means middle, and   means strong.) (HL-3070CW only)
When an error has occurred, the type of error is displayed on the LCD message at first as shown below.
 
Cover is open
Next, the second message which shows information for clearing the...

Control  Panel
79
3
Reprinting documents3
Reprinting the last job3
You can reprint the data from the last print job without sending it from the computer again.
Note
 Reprint function is not available when Secure Function Lock 2.0 (HL-3070CW only) is On. For more 
information about Secure Function Lock 2.0, see the Chapter 14 of the Network User’s Guide on the CD-
ROM we have supplied.
 If you want to cancel reprinting, press Cancel.
 If the printer does not have enough memory to spool the print job...

Control  Panel
80
3
Deleting the last job3
Choose Delete in step c on How to reprint the last job on page 79.
Canceling the reprint job3
If you want to cancel the current reprint job, press Cancel. Cancel also allows you to cancel a paused reprint 
job.
Printing Secure data3
Secure data3
Secure documents are protected by a password and only those people who know the password will be able 
to print the document. The printer will not print the document when you send it for printing. To print the 
document,...