Brother Hl 3040cn User Manual

Control  Panel
91
3
Auto Regist. RegistrationAdjusts the print position of each 
color automatically. (See Auto 
Registration on page 97.)
Frequency Low/Medium*/High/OffSets the interval time you want to 
carry out the auto registration. (See 
Auto Registration on page 97.)
Manual Regist. Print ChartPrints the chart to manually check 
the registration of the colors. (See 
Manual Registration on page 98.)
Set Registration 1 Magenta/2 Cyan/
3 Yellow/4 Magenta/
5 Cyan/6 Yellow/
7 Magenta/8 Cyan/
9...

Control  Panel
92
3
Index PrintSimple*/DetailsSets the format of the index for direct 
print. If you choose Details, 
printing time will be longer. (See 
Printing data from a USB flash 
memory drive with direct print 
(HL-3070CW only) on page 27.)
PictBridge(HL-3070CW only)
Submenu Menu Selections Options Descriptions
Paper SizeLetter*/A4/B5/A5/B6/A6Sets the size of paper for PictBridge.
Orientation
Portrait*/Landscape

Portrait/Landscape*This printer can print pages in portrait 
or landscape orientation...

Control  Panel
93
3
Example of changing a menu setting3
Setting IP address
aPress any of the Menu buttons (+, -, OK or Back) to take the printer offline.
bPress + or - to choose Network. 
Select ab or OK
h
 
Network
c(HL-3070CW only) Press + or - to choose Wired LAN  or WLAN. 
Wired LAN
dPress OK. 
TCP/IP
ePress OK. 
Boot Method
fPress the - button. 
IP Address
gPress OK. The first part of the number will be blinking. 
169.254.000.192
hPress + or - to increase or decrease the number. Press OK to go to...

Control  Panel
94
3
Default settings3
The printer has three levels of default settings; the default settings have been set at its factory before 
shipment (see Menu table on page 83).

Network default settings

Factory reset

Settings reset
Note
 You cannot modify the preset default settings.
 Page counter can never be changed.
 
Network default settings3
If you want to reset only the print server back to its default settings (by resetting all network information such 
as the password and IP address),...

Control  Panel
95
3
Settings Reset3
This operation will reset all the machine settings back to the settings that were set at the factory:
aDisconnect the network cable from the printer; otherwise the network settings (such as IP address) will 
not be reset.
bPress + or - to choose Reset Menu. Press OK. 
Select ab or OK
h
 
Reset Menu
c Press + and Cancel at the same time. 
Reset Printer
d Press OK after the following message appears. 
Settings Reset
ePress OK again. 
Reset Printer?
fThe printer will...

Control  Panel
96
3
Calibration3
The output density for each color may vary depending on the environment the machine is in such as 
temperature and humidity. Calibration helps you to improve the color density.
Note
If you print using the Windows
® printer driver, you need to perform the calibration from the Windows® 
printer driver. See Color Calibration on page 43.
If you print using the Macintosh printer driver, you need to perform the calibration using the status monitor. 
See Status Monitor (For Mac...

Control  Panel
97
3
Auto Registration3
Registration3
You can adjust the print position of each color automatically.
aPress + or - to choose Color Correction. Press OK. 
Select ab or OK
h
 
Color Correction
bPress + or - to choose Auto Regist.. Press OK. 
Auto Regist.
cPress OK. 
Registration
dPress OK again. 
OK?
Frequency3
You can set how often the auto registration occurs.
aPress + or - to choose Color Correction. Press OK. 
Select ab or OK
h
 
Color Correction
bPress + or - to choose Auto Regist.....

Control  Panel
98
3
Manual Registration3
Print Chart3
You can print the color registration chart to manually check the registration of the colors.
aPress + or - to choose Color Correction. Press OK. 
Select ab or OK
h
 
Color Correction
bPress + or - to choose Manual Regist.. Press OK. 
Manual Regist.
cPress OK. 
Print Chart
Set Registration3
You can correct the color registration manually.
aPress + or - to choose Color Correction. Press OK. 
Select ab or OK
h
 
Color Correction
bPress + or - to choose...

99
4
4
SO-DIMM4
 
The printer has 32 MB (HL-3040CN) or 64 MB (HL-3070CW) of standard memory and one slot for optional 
memory expansion. You can expand the memory up to 544 MB (HL-3040CN) or 576 MB (HL-3070CW) by 
installing a Dual In-line Memory Module (SO-DIMM).
In general, the machine uses industry-standard SO-DIMM with the following specifications:

Type: 144 pin and 64 bit output

CAS latency: 2

Clock frequency: 100 MHz or more

Capacity: 64, 128, 256 or 512 MB

Height: 31.75 mm (1.25 in.)

SDRAM...

Option
100
4
Installing extra memory4
Note
Always turn off the printer power switch before installing or removing the SO-DIMM.
 
aTurn off the printer power switch, and then unplug the printer. Disconnect the interface cable from the 
printer.
bRemove the plastic (1) and then the metal (2) SO-DIMM covers. 
cUnpack the SO-DIMM and hold it by its edges.
CAUTION 
To prevent damage to the printer from static electricity, DO NOT touch the memory chips or the board 
surface.
 
2
1