Brother HL 2700CN User Manual

							3 - 14   CONTROL PANEL
HP LASERJET FONT NO.=I0000:#####
FONT PITCH=###.##
SYMBOL SETPC-8/...
Sets the symbol set or the character set.
TABLE PRINTPrint code table.
AUTO LF=OFF/ON
ON: CR→CR+LF, OFF: CR→CR
AUTO CR=OFF/ON
ON: LF→LF+CR, FF+CR, or VT→VT+CR
OFF: LF→LF, FF→FF, or VT→VT
AUTO WRAP=OFF/ON
Selects whether a line feed and carriage return 
will happen when the printer reaches the right 
margin.
AUTO SKIP=ON/OFF
Selects whether a line feed and carriage return 
will happen when the printer position reaches 
the bottom margin.
LEFT MARGIN=####
Sets the left margin at column 0 to 126 columns 
at 10 cpi.
RIGHT MARGIN=####
Sets the right margin at column 10 to 136 
columns at 10 cpi.
TOP MARGIN=####
Sets the top margin at a distance from the top 
edge of the paper: 0, 0.33, 0.5, 1.0, 1.5 or 2.0 
The factory setting is 0.5
BOTTOM MARGIN=####
Sets the bottom margin at a distance from the 
bottom edge of the paper: 0, 0.33, 0.5, 1.0, 1.5 
or 2.0
The factory setting is 0.33(None-HP), 0.5(HP)
LINES=####
Sets the number of lines on each page from 5 to 
128 lines.
PRINT MENU (Continued)
Display ShowsDescription
 
						

							CONTROL PANEL   3 - 15
EPSON FX-850 FONT NO.=I0000:#####
FONT PITCH=###.##
CHARACTER SETPC-8/...
Sets the symbol set or the character set.
TABLE PRINTPrint code table.
AUTO LF=OFF/ON
ON: CR→CR+LF
OFF: CR→CR
AUTO MASK=OFF/ON
LEFT MARGINSets the left margin at column 0 to 126 columns 
at 10 cpi.
RIGHT MARGINSets the right margin at column 10 to 136 
columns at 10 cpi.
TOP MARGINSets the top margin at a distance from the top 
edge of the paper: 0, 0.33, 0.5, 1.0, 1.5 or 2.0 
The factory setting is 0.33
BOTTOM MARGINSets the bottom margin at a distance from the 
bottom edge of the paper: 0, 0.33, 0.5, 1.0, 1.5 
or 2.0 The factory setting is 0.33
LINESSets the number of lines on each page from 5 to 
128 lines.
IBM PROPRINTER FONT NO.=I0000:#####
FONT PITCH=###.##
CHARACTER SETPC-8/...
Sets the symbol set or the character set.
TABLE PRINTPrints code table.
AUTO LF=OFF/ON
ON: CR→CR+LF,
OFF: CR→CR
AUTO CR=OFF/ON
AUTO MASK=OFF/ON
LEFT MARGINSets the left margin at column 0 to 126 columns 
at 10 cpi.
RIGHT MARGINSets the right margin at column 10 to 136 
columns at 10 cpi.
TOP MARGINSets the top margin at a distance from the top 
edge of the paper: 0, 0.33, 0.5, 1.0, 1.5 or 2.0 
The factory setting is 0.33
BOTTOM MARGINSets the bottom margin at a distance from the 
bottom edge of the paper: 0, 0.33, 0.5, 1.0, 1.5 
or 2.0
The factory setting is 0.33
LINESSets the number of lines on each page from 5 to 
128 lines.
PRINT MENU (Continued)
Display ShowsDescription
 
						

							3 - 16   CONTROL PANEL
HP-GL CHAR SET(STD)=####
CHAR SET(ALT)=####
PEN # SIZEPEN 1 to 6
(Set size and gray percentage for the selected 
pen.)
PEN # GRAYPEN 1 to 6
15, 30, 45, 75, 90 or 100 %
(# is the selected pen number)
BR-SCRIPT ERROR PRINT=OFF/ON
CAPT=OFF/ON
CAPT: Color Advanced Photoscale Technology 
offers photographic fine gray scale on graphics. 
NETWORK 
Display ShowsDescription
TCP/IPSubsetting Description
TCP/IP ENABLE=ON/OFF
IP ADDRESS=###.###.###.###
SUBNET MASK=###.###.###.###
GATEWAY=###.###.###.###
IP BOOT TRIES=#
IP METHOD=AUTO/STATIC/RARP/BOOTP/DHCP
APIPA=ON/OFF
NETWARE NETWARE ENABLE=ON/OFF
NET FRAME=AUTO/8023/ENET/8022/SNAP
APPLETALK=ON/OFF
NETBEUI=ON/OFF
DLC/LLC=ON/OFF
NETBIOS/IP=ON/OFF
ENET=AUTO/100B-FD/100B-HD/10B-FD/10B-HD
PRINT MENU (Continued)
Display ShowsDescription
 
						

							CONTROL PANEL   3 - 17
INTERFACE
Display ShowsDescription
SELECT=AUTO/USB/PARALLEL/NETWORK
AUTO IF TIME= 1:99 (sec)
You need to set the time-out period for the auto interface selection. 
INPUT BUFFER= Level1:15
Increases or decreases the input 
buffer capacity.RESTART PRINTER?
PARALLELWhen using the parallel interface
Subsetting Description
HIGH SPEED=ON/OFF
Turns high-speed parallel communications on or 
off.
BI-DIR=ON/OFF
Turns bi-directional parallel communications on 
or off.
USB2.0 HIGH SPEED=ON/OFF
Turns high-speed USB2.0 communications on 
or off.
RESET MENU
Display ShowsDescription
RESET PRINTERResets the printer and restores all printer settings (including command settings) to 
settings you have previously made with the control panel buttons.
FACTORY RESETResets the printer and restores all printer default settings (including command 
settings) to the factory settings. See List of factory settings on page 3-22.
PARTS LIFESubsetting Description
OPC BELTResets the OPC Belt parts life.
Appears when you need to replace the OPC 
belt.
FUSER UNITResets the Fusing Unit parts life.
Appears when you need to replace the Fusing 
unit.
120K KITResets the 120K Kit parts life.
Appears when you need to replace the 120K Kit.
PF KIT2Resets the PF kit2 parts life.
Appears when you need to replace the PF Kit2.
 
						

							3 - 18   CONTROL PANEL
REPRINT
Display ShowsDescription
COPIES = 1 Appears when the printer has reprint data but no PROOF, PUBLIC or SECURE 
data in the memory.
LAST JOB COPIES = 1
Appears when the printer has reprint data and PROOF, PUBLIC or SECURE data 
in the memory.
PROOF FILE XXX (User name), XXX (Job name), COPIES = 1
Appears when the printer has PROOF data in the memory.
PUBLIC FILE XXX (User name), XXX (Job name), COPIES = 1
Appears when the printer has PUBLIC data in the memory.
SECURE FILE XXX (User name), XXX (Job name), XXX (Pass word), COPIES = 1
Appears when the printer has SECURE data in the memory.
 
						

							CONTROL PANEL   3 - 19
Set date and time
Press the + or - button until the SETUP menu appears (and to 
display each setting shown below).
Press the Set button, and then press the + or - button 
until DATE & TIME appears.
Press the Set button, and then press the + or - button until YEAR 
appears.
a) Press the Set button.
b) Press the + button until the correct year appears.
c) Press the Set button.
d) After a short time, the display changes.
e) Press the Set button.
Repeat processes ‘a to e’ until you have set the date & time.
--MENU--
INFORMATION
--MENU--
SETUP
SETUP 
DATE & TIME
DATE & TIME
YEAR
YEAR
=1999 *
YEAR
=2003 
YEAR
=2003 *
DATE & TIME
YEAR
DATE & TIME
MONTH
DATE & TIME
2003/10/25 10:22
 
						

							3 - 20   CONTROL PANEL
Set IP address
Press the + or - button until the NETWORK menu appears (and to 
display each setting shown below).
Press the Set button.
Press the Set button.
Press the + button.
Press the Set button.
The last digit in the first part of the number is blinking.
Press the + or - button to increase or decrease the number.
Press the Set button to go to the next number. 
Repeat this process until you have set your IP address. 
Press the Set button to complete the IP address.
An asterisk appears at the end of the display.
--MENU--
INFORMATION
--MENU--
NETWORK
NETWORK
TCP/IP
TCP/IP 
TCP/IP ENABLE
TCP/IP
IP ADDRESS=
IP ADDRESS=
192.0.0.192    *2
IP ADDRESS=
123.0.0.192
0
IP ADDRESS=
123.45.67.89 9
IP ADDRESS=
123.45.67.89 *
 
						

							CONTROL PANEL   3 - 21
About emulation modes
This printer has the following emulation modes: 
HP LaserJet mode
The HP LaserJet mode (or HP mode) is the emulation mode in which this printer supports the PCL 5C 
and PCL 6 language of the Hewlett-Packard LaserJet laser printer. Many software applications support 
this type of laser printer. Using this mode will allow your printer to operate at its best with those 
applications. 
BR-Script3 mode
BR-Script is an original Brother page description language and a PostScript® language emulation 
interpreter. This printer supports level 3. The BR-Script interpreter of this printer allows you to control 
text and graphics on pages. 
For technical information about PostScript
® commands, see the following commercial manuals:
■Adobe Systems Incorporated. PostScript
® Language Reference, third Edition. Addison-Wesley 
Publishing Company, Inc., 1999. ISBN: 0-201-37922-8
■Adobe Systems Incorporated. PostScript
® Language Program Design. Addison-Wesley Publishing 
Company, Inc., 1988. ISBN: 0-201-14396-8
■Adobe Systems Incorporated. PostScript
® Language Tutorial and Cookbook. Addison-Wesley 
Publishing Company, Inc., 1985. ISBN: 0-201-10179-3
HP-GL mode
The HP-GL mode is the emulation mode in which this printer supports the HP-GL of the Hewlett-Packard 
plotter model HP-7475A. Many graphics and CAD applications support this type of plotter. Use this mode 
so your printer will work well when printing from those types of applications. 
EPSON FX-850 and IBM Proprinter XL mode
The EPSON FX-850 and IBM Proprinter XL modes are the emulation modes that this printer supports to 
meet the industry-standard for dot matrix printers. Some applications support these dot matrix printer 
emulations. Use these emulation modes so your printer will work well when printing from those types of 
applications.
 
						

							3 - 22   CONTROL PANEL
List of factory settings
Table 1 shows the factory settings. 
Network factory default setting
If you wish to reset the print server back to its default factory settings (resetting all information such as 
the password and IP address information), please follow these steps:
1Turn off the printer.
2Hold down the + button as you turn on the power switch. Keep the button pressed down until the 
LCD display shows 
.
3The print server has been reset to its default factory settings.
■Different emulation modes will have different factory settings.
■The following settings cannot be automatically restored to the factory settings by using the 
FACTORY RESET in the RESET MENU menu - INTERFACE menu, HRC, PAGE 
PROTECTION, SCALABLE FONT, LOCK PANEL, page counter and local language for display 
messages.
■The COPY setting is always restored to the factory setting when the printer is turned off and on.
--MENU--
INFORMATION
 
						

							CONTROL PANEL   3 - 23
Table 1: List of factory settings
MODEMENUFactory Setting
PAPER SOURCE=AUTO
MANUAL FEED=OFF
DUPLEX=OFF
QUALITY HRC=MEDIUM
TONER SAVE=OFF
SETUP LANGUAGE=ENGLISH
POWER SAVE TIME=30MIN
AUTO CONTINUE=OFF
LOCK PANEL=OFF
REPRINT=ON
PAGE PROTECTION=AUTO
EMULATION=AUTO(EPSON)
KEEP PCL=OFF
RAMDISK SIZE=#MB
TIME STYLE=YY/MM/DD hh:mm
PRINT MENU MEDIA TYPE=PLAIN PAPER
PAPER=A4/LETTER
COPIES=1
ORIENTATION=PORTRAIT
PRINT POSITIONX OFFSET=0
Y OFFSET=0
AUTO FF TIME=5
FF SUPPRESS=OFF
HP LASERJETFONT NO.=59
FONT PITCH/POINT=10.00/12.00
SYMBOL/CHARACTER SET=PC8
AUTO LF=OFF
AUTO CR=OFF
AUTO WRAP=OFF
AUTO SKIP=ON
LEFT MARGIN=####
RIGHT MARGIN=####
TOP MARGIN=####
BOTTOM MARGIN=####
LINES=####