Brother HL 2700CN User Manual

3 - 24   CONTROL PANEL
PRINT MENU EPSON FX-850FONT NO.=59
FONT PITCH/POINT=10.00/12.00
SYMBOL/CHARACTER SET=US ASCIF
AUTO LF=OFF
AUTO MASK=OFF
LEFT MARGIN=####
RIGHT MARGIN=####
TOP MARGIN=####
BOTTOM MARGIN=####
LINES=####
IBM PROPRINTERFONT NO.=59
FONT PITCH/POINT=10.00/12.00
SYMBOL/CHARACTER SET=PC8
AUTO LF=OFF
AUTO CR=OFF
LEFT MARGIN=####
RIGHT MARGIN=####
TOP MARGIN=####
BOTTOM MARGIN=####
LINES=####
HP-GLCHAR SET(STD)=####
CHAR SET(ALT)=####
PEN # SIZE
PEN # GRAY
BR-SCRIPTERROR PRINT=OFF
CAPT=OFF...

CONTROL PANEL   3 - 25
NETWORK TCP/IPTCP/IP ENABLE=ON
IP ADDRESS=169.254.###.###
SUBNET MASK=255.255.0.0
GATEWAY=0.0.0.0
IP BOOT TRIES=3
IP METHOD=AUTO
APIPA=ON
NETWARENETWARE ENABLE=ON
NET FRAME=AUTO
APPLETALK=ON
NETBEUI=ON
DLC/LLC=ON
NETBIOS/IP=ON
ENET=AUTO
INTERFACE SELECT=AUTO
AUTO IF TIME=5
INPUT BUFFER=LEVEL 3
PARALLELHIGH SPEED=ON
BI-DIR=ON
USB2.0HIGH SPEED=ON
Automatic Private IP Addressing (APIPA) protocol, automatically configure an IP address and 
subnet mask. See the Network Users Guide,...

3 - 26   CONTROL PANEL
Reprint setting
If you want to reprint a document that has just been printed, you can reprint it by using the control panel 
button. Also, if you have created a document that you wish to share with colleagues, simply spool the 
document to a non-secure area of the printer. This document can then be reprinted by anyone who is on 
the network or at the printer control panel.
If you want to print PROOF, PUBLIC or SECURE data, we recommend that you install the optional 
CompactFlash
®...

CONTROL PANEL   3 - 27
Reprinting the last job
You can reprint the data from the last print job without sending it from the computer again.
Reprint the last job three times
1Turn the REPRINT setting ON by using the control panel buttons to go to the SETUP menu.
■If you want to cancel reprinting, press the Job Cancel button.
■If the printer does not have enough memory to spool the print job data, it will print only the last 
page. We recommend that you expand the memory when you want to reprint a large...

3 - 28   CONTROL PANEL
Printing PROOF data
You can use this setting to reprint PROOF data that has just been printed and has no security settings. 
Documents that are placed in the PROOF area are available to anyone. You might use this setting for a 
document that will be moved to a public folder at a later date. 
When the area to spool data is full, the earliest data is automatically deleted first. The order of deleting 
data is not connected to the order of reprinting.
When you reprint PROOF data,...

CONTROL PANEL   3 - 29
Printing SECURE data
SECURE documents are protected by a password and only those people who know the password will 
be able to print the document. The printer will not print the document when you send it for printing. 
To print the document you must use the control panel of the printer (with the password) or connect to the 
printer using a web browser.
If you want to delete the spooled data, you can carry out this operation using the control panel or the 
web-based management...

3 - 30   CONTROL PANEL
How to print SECURE data
Press the + or - button until the REPRINT menu appears (and to 
display each setting shown below).
Press the + or - button.
Press the Set button. 
Press the + or - to select the user name.
Press the Set button to set the user name.
Press the + or - to select the job.
Press the Set button to set the job.
Type your password. 
Press the Set button to set the password
Press the Set button. 
If you press the Go button, the display shows PRESS SET TO 
PRINT....

CONTROL PANEL   3 - 31
When there is no reprint data in memory
If the printer does not have reprint data in the memory and you press the Set button when the printer is 
in the REPRINT menu, the LCD shows NO DATA STORED.
To delete the job
Using the control panel button, select the DELETE STORAGE submenu under the SETUP menu. Select 
the user name and the job to delete it (you will need to enter the password to delete secure data).
To cancel the reprint job
Pressing the Job Cancel button allows you to...

4 - 1   OPTIONS
4
Optional accessories and supplies
This printer has the following optional accessories. You can increase the capabilities of the printer with 
these items.
Lower tray unit (LT-27CL)
See Lower tray unit (LT-27CL) on page 4-2.
Legal tray (LT-27LG)
See Legal tray (LT-27LG) on page 4-5.
Duplex unit (DX-2700)
See Duplex unit (DX-2700) on page 4-7.
CompactFlash® card
See CompactFlash® card on page 4-11.
SO-DIMM memory
See SO-DIMM on page 4-13.
Optional fonts package
See Optional fonts package...

OPTIONS   4 - 2
Lower tray unit (LT-27CL)
The lower tray unit (Tray 2) is an optional device that can hold up to 530 sheets of extra paper (75 g/m2 
or 20 lb). You can put Letter, A4, B5 (JIS and ISO) or Executive size (176x250 to 215.9x297mm) paper 
in this tray. If you want to buy the optional lower tray unit, call the dealer you bought the printer from.
Putting paper in the lower tray unit
After you have installed the lower paper tray, you can put paper in it the same way you put paper in the 
upper...