Brother HL 2700CN User Manual

2 - 14   DRIVER AND SOFTWARE
Advanced options
1Select the Paper Size and Copy Count.
2Set the Image Color Management, Scaling and TrueType Font settings.
2 1
 

DRIVER AND SOFTWARE   2 - 15
3You can change settings by selecting the setting in the Printer Features list:
■Media Type
■Collate (Only when a CompactFlash
® card is installed)
■Job Spooling
■PASSWORD
■Job Name
■Print Quality
■HRC
■Toner Save
■Sleep Time
■Color / Mono
■Gamma Correction
■Color Mode
■Improve Gray Color
■Enhance Black Printing
■Halftone Screen Lock 
■BR-Script Level
3
 

2 - 16   DRIVER AND SOFTWARE
For Macintosh®
This printer supports Mac OS® 8.6 to 9.2 and Mac OS® X 10.1 to 10.2.
You can download the latest driver by accessing the Brother Solutions Center at 
http://solutions.brother.com
Page setup
You can set the Paper Size, Orientation and Scale.
Layout
Set the Layout, Pages per Sheet and other settings.
The screens in this section are from Mac OS® X 10.1. The screens on your Macintosh® will vary 
depending on your Operating System.
 

DRIVER AND SOFTWARE   2 - 17
Specific settings
Set the Media Type, Job Spooling, PASSWORD and other settings.
 

2 - 18   DRIVER AND SOFTWARE
Software
Software for Networks 
BRAdmin Professional utility
The BRAdmin Professional is a utility for managing your Brother network enabled printers that are 
running under Windows® 95/98/Me, Windows NT® 4.0 and Windows® 2000/XP.
It allows you to easily configure and check the status of your printer on the network.
Driver Deployment Wizard 
This installer includes the Windows® PCL driver and Brother network port driver (LPR and NetBIOS). 
The administrator should set up the...

DRIVER AND SOFTWARE   2 - 19
Automatic Emulation Selection
This printer has an Automatic Emulation Selection feature. When the printer receives data from the 
computer, it automatically chooses the emulation mode. This feature has been set at the factory to ON. 
The printer can choose from the following combinations: 
To get the most out of this laser printer, we recommend that you use the Brother BR-Script3 emulation.
The printer is set to the HP color printer emulation (PCL 5C) mode automatically....

2 - 20   DRIVER AND SOFTWARE
Automatic Interface Selection
This printer has an Automatic Interface Selection feature. When the printer receives data from the 
computer, it automatically selects the IEEE 1284 Parallel or the USB interface, whichever is appropriate. 
When you use the parallel interface, you can turn the high-speed and bi-directional parallel 
communications on or off by using the control panel buttons to access PARALLEL in the INTERFACE 
menu. See INTERFACE on page 3-17. Since the...

CONTROL PANEL   3 - 1
3
Control panel
This printer has one liquid crystal display (LCD), six buttons and two Light Emitting Diodes (LEDs) on 
the control panel. The display can show various messages with up to 16 characters in each of the two 
rows. The LEDs light to indicate the current printer status.
Figure 3-1
Control panel
 

3 - 2   CONTROL PANEL
Buttons
You can control the basic printer operations and change various printer settings with the six buttons (Go, 
Job Cancel, +, -, Set, Back).
ButtonOperations
GoExit from the control panel menu, reprint settings, error messages and 
sleep mode.
Job CancelStop and cancel the print job in progress.
Menu +Move forward through menus.
Move forward through the options you can choose.
-Move backward through menus.
Move backward through the options you can choose.
SetSelect the control...

CONTROL PANEL   3 - 3
Go button
You can change the panel indications from the current status (Menu, Error and Reprint settings) by 
pressing the Go button once. For ERROR indications, the control panel only changes when the error is 
cleared.
You can pause printing with the Go button. Pressing the Go button again restarts the print job and clears 
the pause. During a pause, the printer is off-line.
Job Cancel button
You can cancel the processing or printing of data with the Job Cancel button. The display...