Brother HL 2700CN User Manual

3 - 14   CONTROL PANEL
HP LASERJET FONT NO.=I0000:#####
FONT PITCH=###.##
SYMBOL SETPC-8/...
Sets the symbol set or the character set.
TABLE PRINTPrint code table.
AUTO LF=OFF/ON
ON: CR→CR+LF, OFF: CR→CR
AUTO CR=OFF/ON
ON: LF→LF+CR, FF+CR, or VT→VT+CR
OFF: LF→LF, FF→FF, or VT→VT
AUTO WRAP=OFF/ON
Selects whether a line feed and carriage return 
will happen when the printer reaches the right 
margin.
AUTO SKIP=ON/OFF
Selects whether a line feed and carriage return 
will happen when the printer position...

CONTROL PANEL   3 - 15
EPSON FX-850 FONT NO.=I0000:#####
FONT PITCH=###.##
CHARACTER SETPC-8/...
Sets the symbol set or the character set.
TABLE PRINTPrint code table.
AUTO LF=OFF/ON
ON: CR→CR+LF
OFF: CR→CR
AUTO MASK=OFF/ON
LEFT MARGINSets the left margin at column 0 to 126 columns 
at 10 cpi.
RIGHT MARGINSets the right margin at column 10 to 136 
columns at 10 cpi.
TOP MARGINSets the top margin at a distance from the top 
edge of the paper: 0, 0.33, 0.5, 1.0, 1.5 or 2.0 
The factory setting is 0.33...

3 - 16   CONTROL PANEL
HP-GL CHAR SET(STD)=####
CHAR SET(ALT)=####
PEN # SIZEPEN 1 to 6
(Set size and gray percentage for the selected 
pen.)
PEN # GRAYPEN 1 to 6
15, 30, 45, 75, 90 or 100 %
(# is the selected pen number)
BR-SCRIPT ERROR PRINT=OFF/ON
CAPT=OFF/ON
CAPT: Color Advanced Photoscale Technology 
offers photographic fine gray scale on graphics. 
NETWORK 
Display ShowsDescription
TCP/IPSubsetting Description
TCP/IP ENABLE=ON/OFF
IP ADDRESS=###.###.###.###
SUBNET MASK=###.###.###.###...

CONTROL PANEL   3 - 17
INTERFACE
Display ShowsDescription
SELECT=AUTO/USB/PARALLEL/NETWORK
AUTO IF TIME= 1:99 (sec)
You need to set the time-out period for the auto interface selection. 
INPUT BUFFER= Level1:15
Increases or decreases the input 
buffer capacity.RESTART PRINTER?
PARALLELWhen using the parallel interface
Subsetting Description
HIGH SPEED=ON/OFF
Turns high-speed parallel communications on or 
off.
BI-DIR=ON/OFF
Turns bi-directional parallel communications on 
or off.
USB2.0 HIGH...

3 - 18   CONTROL PANEL
REPRINT
Display ShowsDescription
COPIES = 1 Appears when the printer has reprint data but no PROOF, PUBLIC or SECURE 
data in the memory.
LAST JOB COPIES = 1
Appears when the printer has reprint data and PROOF, PUBLIC or SECURE data 
in the memory.
PROOF FILE XXX (User name), XXX (Job name), COPIES = 1
Appears when the printer has PROOF data in the memory.
PUBLIC FILE XXX (User name), XXX (Job name), COPIES = 1
Appears when the printer has PUBLIC data in the memory.
SECURE FILE XXX...

CONTROL PANEL   3 - 19
Set date and time
Press the + or - button until the SETUP menu appears (and to 
display each setting shown below).
Press the Set button, and then press the + or - button 
until DATE & TIME appears.
Press the Set button, and then press the + or - button until YEAR 
appears.
a) Press the Set button.
b) Press the + button until the correct year appears.
c) Press the Set button.
d) After a short time, the display changes.
e) Press the Set button.
Repeat processes ‘a to e’ until you...

3 - 20   CONTROL PANEL
Set IP address
Press the + or - button until the NETWORK menu appears (and to 
display each setting shown below).
Press the Set button.
Press the Set button.
Press the + button.
Press the Set button.
The last digit in the first part of the number is blinking.
Press the + or - button to increase or decrease the number.
Press the Set button to go to the next number. 
Repeat this process until you have set your IP address. 
Press the Set button to complete the IP address.
An asterisk...

CONTROL PANEL   3 - 21
About emulation modes
This printer has the following emulation modes: 
HP LaserJet mode
The HP LaserJet mode (or HP mode) is the emulation mode in which this printer supports the PCL 5C 
and PCL 6 language of the Hewlett-Packard LaserJet laser printer. Many software applications support 
this type of laser printer. Using this mode will allow your printer to operate at its best with those 
applications. 
BR-Script3 mode
BR-Script is an original Brother page description language and...

3 - 22   CONTROL PANEL
List of factory settings
Table 1 shows the factory settings. 
Network factory default setting
If you wish to reset the print server back to its default factory settings (resetting all information such as 
the password and IP address information), please follow these steps:
1Turn off the printer.
2Hold down the + button as you turn on the power switch. Keep the button pressed down until the 
LCD display shows 
.
3The print server has been reset to its default factory settings....

CONTROL PANEL   3 - 23
Table 1: List of factory settings
MODEMENUFactory Setting
PAPER SOURCE=AUTO
MANUAL FEED=OFF
DUPLEX=OFF
QUALITY HRC=MEDIUM
TONER SAVE=OFF
SETUP LANGUAGE=ENGLISH
POWER SAVE TIME=30MIN
AUTO CONTINUE=OFF
LOCK PANEL=OFF
REPRINT=ON
PAGE PROTECTION=AUTO
EMULATION=AUTO(EPSON)
KEEP PCL=OFF
RAMDISK SIZE=#MB
TIME STYLE=YY/MM/DD hh:mm
PRINT MENU MEDIA TYPE=PLAIN PAPER
PAPER=A4/LETTER
COPIES=1
ORIENTATION=PORTRAIT
PRINT POSITIONX OFFSET=0
Y OFFSET=0
AUTO FF TIME=5
FF SUPPRESS=OFF
HP...