Brother DCP 9010CN User Manual

Section III
SoftwareIII
Software and Network features34
 

34
5
The User’s Guide on the CD-ROM includes 
the Software User’s Guide  and Network 
User’s Guide  for features available when 
connected to a computer (for example, 
printing and scanning). These guides have 
easy to use links that, when clicked, will take 
you directly to a particular section.
You can find information on these features:
„ Printing
„ Scanning
„ ControlCenter3 (Windows
®)
„ ControlCenter2 (Macintosh)
„ Network Printing
„ Network Scanning 
Note
See  Accessing the Software User’s Guide...

Section IV
AppendixesIV
Safety and legal36
Options41
Troubleshooting and routine maintenance43
Menu and features105
Specifications113
Glossary124
 

36
A
Choosing a locationA
Put your machine on a flat, level, stable surface that is free of vibration and shocks, such as a 
desk. Put the machine near a standard grounded electrical socket. Choose a location where the 
temperature remains between 10°C and 32.5 °C and the humidity is between 20% to 80% 
(without condensation).
WARNING 
DO NOT expose the machine to direct sunlight, excessive heat, open flames, salty or corrosive 
gasses, moisture or dust.
  
DO NOT place the machine near heaters, air...

Safety and legal37
A
To use the machine safelyA
Important safety instructionsA
1 Read all of these instructions.
2 Save them for later reference.
3 Follow all warnings and instructions marked on the product.
4 Unplug this product from the wall socket before cleaning inside of the machine. DO NOT use liquid or aerosol cleaners. Use a dry, lint-free soft cloth for cleaning.
5 DO NOT place this product on an unstable cart, stand, or table. The product may fall, causing  serious damage to the product.
6...

38
15 Unplug this product from the power socket and refer all servicing to Brother Authorized Service Personnel under the following conditions:
„ When the power cord is damaged or frayed.
„ If liquid has been spilled into the product.
„ If the product has been exposed to rain or water.
„ If the product does not operate normally when the operating instructions are followed. 
Adjust only those controls that are covered by the operating instructions. Incorrect 
adjustment of other controls may result in...

Safety and legal39
A
Libtiff Copyright and LicenseA
Use and Copyright
Copyright© 1988-1997 Sam Leffler
Copyright© 1991-1997 Silicon Graphics, Inc.
Permission to use, copy, modify, distribute, and sell this software and its documentation for any 
purpose is hereby granted without fee, provided that (i) the above copyright notices and this 
permission notice appear in all copies of the software and related documentation, and (ii) the 
names of Sam Leffler and Silicon Graphics may not be used in any...

40
TrademarksA
The Brother logo is a registered trademark of Brother Industries, Ltd.
Brother is a registered trademark of Brother Industries, Ltd.
Multi-Function Link is a registered trademark of Brother International Corporation.
Adobe, Flash, Illustrator, PageMaker, Photoshop, PostScript and PostScript 3 are either 
registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or 
other countries.
Microsoft, Windows, Windows Server and Internet Explorer are registered...

41
B
B
Memory boardB
This machine has 64 MB of standard memory 
and one slot for optional memory expansion. 
You can expand the memory up to 576 MB by 
installing dual in-line memory modules 
(SO-DIMMs). When you add the optional 
memory, it increases the performance for 
both copier and printer operations.
In general, the machine uses 
industry-standard SO-DIMM with the 
following specifications:
Type: 144 pin and 64 bit output
CAS latency: 2
Clock frequency: 100 MHz or more
Capacity: 64, 128, 256 or...

42
eHold the SO-DIMM by the edges and 
align the notches in the SO-DIMM with 
the protrusions in the slot. Insert the 
SO-DIMM diagonally (1), then tilt it 
toward the interface board until it clicks 
into place (2).
 
fPut the metal (2) and then the plastic (1)   
SO-DIMM covers back on.
 
gPlug the machine’s power cord back into 
the electrical socket first, and then 
connect the interface cable. 
hTurn on the machine’s power switch.
Note
To make sure that you have installed the 
SO-DIMM correctly,...