Brother DCP 9010CN User Manual

							
Section III
SoftwareIII
Software and Network features34
 
						

							
34
5
The User’s Guide on the CD-ROM includes 
the Software User’s Guide  and Network 
User’s Guide  for features available when 
connected to a computer (for example, 
printing and scanning). These guides have 
easy to use links that, when clicked, will take 
you directly to a particular section.
You can find information on these features:
„ Printing
„ Scanning
„ ControlCenter3 (Windows
®)
„ ControlCenter2 (Macintosh)
„ Network Printing
„ Network Scanning 
Note
See  Accessing the Software User’s Guide 
and Network User’s Guide  on page 3.
 
How to read the HTML 
User’s Guide
5
This is a quick reference for using the HTML 
User’s Guide.
Windows®5
Note
If you have not installed the software, see 
Viewing documentation (Windows
®) 
on page 3.
 
aFrom the  Start menu, point to  Brother, 
DCP-9010CN  from the programs group, 
then click  User’s Guides in HTML 
format .
bClick on the manual you want (SOFTWARE 
USER’S GUIDE
 or NETWORK USER’S 
GUIDE
) from the Top Menu. 
cClick the heading you would like to view 
from the list at the left of the window.
 
Macintosh5
aMake sure your Macintosh is turned on. 
Insert the Brother CD-ROM into your 
CD-ROM drive.
bDouble-click the  Documentation icon.
cDouble-click your language folder, and 
then double-click  top.html.
dClick on the manual you want (SOFTWARE 
USER’S GUIDE
 or NETWORK USER’S 
GUIDE
) in the top menu, and then click the 
heading you would like to read from the list 
at the left of the window.
 
Software and Network features5
 
						

							
Section IV
AppendixesIV
Safety and legal36
Options41
Troubleshooting and routine maintenance43
Menu and features105
Specifications113
Glossary124
 
						

							
36
A
Choosing a locationA
Put your machine on a flat, level, stable surface that is free of vibration and shocks, such as a 
desk. Put the machine near a standard grounded electrical socket. Choose a location where the 
temperature remains between 10°C and 32.5 °C and the humidity is between 20% to 80% 
(without condensation).
WARNING 
DO NOT expose the machine to direct sunlight, excessive heat, open flames, salty or corrosive 
gasses, moisture or dust.
  
DO NOT place the machine near heaters, air conditioners, refrigerators, water or chemicals. 
 
CAUTION 
Avoid placing your machine in a high-traffic area.
  
Avoid placing your machine on a carpet.
  
DO NOT connect your machine to electrical sockets controlled by wall switches or automatic 
timers, or to the same circuit as large appliances that might disrupt the power supply.
 
 
Disruption of power can delete information from the machine’s memory.
  
Make sure cables leading to the machine do not constitute a trip hazard.
 
Safety and legalA
    
 
						

							
Safety and legal37
A
To use the machine safelyA
Important safety instructionsA
1 Read all of these instructions.
2 Save them for later reference.
3 Follow all warnings and instructions marked on the product.
4 Unplug this product from the wall socket before cleaning inside of the machine. DO NOT use liquid or aerosol cleaners. Use a dry, lint-free soft cloth for cleaning.
5 DO NOT place this product on an unstable cart, stand, or table. The product may fall, causing  serious damage to the product.
6 Slots and openings in the casing at the back or bottom are provided for ventilation. To ensure  reliable operation of the product and to protect it from overheating, these openings must not 
be blocked or covered. The openings should never be blocked by placing the product on a bed, 
sofa, rug, or other similar surface. This product should never be placed near or over a radiator 
or heater. This product should never be placed in a built-in installation unless adequate 
ventilation is provided.
7 This product should be connected to an AC power source within the range indicated on the  rating label. DO NOT connect it to a DC power source or inverter. If you are not sure, contact 
a qualified electrician.
8 This product is equipped with a 3-wire grounded plug. This plug will only fit into a grounded  power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, call 
your electrician to replace your obsolete outlet. DO NOT defeat the purpose of the grounded 
plug.
9 Use only the power cord supplied with this machine.
10 DO NOT allow anything to rest on the power cord. DO NOT place this product where people  can walk on the cord.
11 Use the product in a well-ventilated area.
12 The power cord, including extensions, should be no longer than 5 metres. DO NOT share the same power circuit with other high powered appliances, such as an air 
conditioner, copier, shredder, and so on. If you cannot avoid using the machine with these 
appliances, we recommend that you use a voltage transformer or a high-frequency noise filter.
Use a voltage regulator if the power source is not stable.
13 DO NOT place anything in front of the machine that will block printed pages. DO NOT place  anything in the path of printed pages.
14 Wait until pages have exited the machine before picking them up.
 
						

							
38
15 Unplug this product from the power socket and refer all servicing to Brother Authorized Service Personnel under the following conditions:
„ When the power cord is damaged or frayed.
„ If liquid has been spilled into the product.
„ If the product has been exposed to rain or water.
„ If the product does not operate normally when the operating instructions are followed. 
Adjust only those controls that are covered by the operating instructions. Incorrect 
adjustment of other controls may result in damage and will often require extensive work by 
a qualified technician to restore the product to normal operation.
„ If the product has been dropped or the casing has been damaged.
„ If the product exhibits a distinct change in performance, indicating a need for service.
16 To protect your product against power surges, we recommend the use of a power protection  device (Surge Protector).
17 To reduce the risk of fire, electric shock and injury to people, note the following: „DO NOT use this product near appliances that use water, a swimming pool or in a wet 
basement.
„ DO NOT use the machine during an electrical storm (there is the remote possibility of an 
electrical shock).
„ DO NOT use this product in the vicinity of a gas leak.
 
						

							
Safety and legal39
A
Libtiff Copyright and LicenseA
Use and Copyright
Copyright© 1988-1997 Sam Leffler
Copyright© 1991-1997 Silicon Graphics, Inc.
Permission to use, copy, modify, distribute, and sell this software and its documentation for any 
purpose is hereby granted without fee, provided that (i) the above copyright notices and this 
permission notice appear in all copies of the software and related documentation, and (ii) the 
names of Sam Leffler and Silicon Graphics may not be used in any advertising or publicity relating 
to the software without the specific, prior written permission of Sam Leffler and Silicon Graphics.
THE SOFTWARE IS PROVIDED AS-IS AND WITHOUT WARRANTY OF ANY KIND, 
EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY WARRANTY 
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR ANY SPECIAL, 
INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY 
DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, 
WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY 
OF LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 
OF THIS SOFTWARE.
 
						

							
40
TrademarksA
The Brother logo is a registered trademark of Brother Industries, Ltd.
Brother is a registered trademark of Brother Industries, Ltd.
Multi-Function Link is a registered trademark of Brother International Corporation.
Adobe, Flash, Illustrator, PageMaker, Photoshop, PostScript and PostScript 3 are either 
registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or 
other countries.
Microsoft, Windows, Windows Server and Internet Explorer are registered trademarks of Microsoft 
Corporation in the United States and/or other countries.
Windows Vista is either a registered trademark or a trademark of Microsoft Corporation in the 
United States and other countries.
Apple, Macintosh, Safari and TrueType are trademarks of Apple Inc., registered in the United 
States and other countries.
Intel, and Pentium are trademarks of Intel Corporation in the U.S. and other countries.
AMD is a trademark of Advanced Micro Devices, Inc.
PowerPC is a registered trademark of IBM in the United States and/or other countries.
Epson is a registered trademark and FX-80 and FX-850 are trademarks of Seiko Epson 
Corporation.
IBM and Proprinter are either registered trademarks or trademarks of International Business 
Machines Corporation in the United States and/or other countries.
Nuance, the Nuance logo, PaperPort and ScanSoft are trademarks or registered trademarks of 
Nuance Communications, Inc. or its affiliates in the United States and/or other countries.
All other trademarks are the property of their respective owners.
 
						

							
41
B
B
Memory boardB
This machine has 64 MB of standard memory 
and one slot for optional memory expansion. 
You can expand the memory up to 576 MB by 
installing dual in-line memory modules 
(SO-DIMMs). When you add the optional 
memory, it increases the performance for 
both copier and printer operations.
In general, the machine uses 
industry-standard SO-DIMM with the 
following specifications:
Type: 144 pin and 64 bit output
CAS latency: 2
Clock frequency: 100 MHz or more
Capacity: 64, 128, 256 or 512 MB
Height: 31.75 mm
Dram Type: SDRAM 2 Bank
You can find more information about memory 
modules on this website:
http://www.buffalo-technology.com/
Note
• There might be some SO-DIMMs that will not work with the machine.
• For more information, contact your  Brother dealer.
 
Installing extra memoryB
aTurn off the machine’s power switch.
bDisconnect the interface cable from the 
machine, and then unplug the power 
cord from the electrical socket.
Note
Be sure to turn off the machine’s power 
switch before you install or remove the 
SO-DIMM.
 
cRemove the plastic (1) and then 
metal (2) SO-DIMM covers.
 
dUnpack the SO-DIMM and hold it by its 
edges.
IMPORTANT
To prevent damage to the machine from 
static electricity, DO NOT touch the 
memory chips or the board surface.
 
OptionsB
1
2
 
						

							
42
eHold the SO-DIMM by the edges and 
align the notches in the SO-DIMM with 
the protrusions in the slot. Insert the 
SO-DIMM diagonally (1), then tilt it 
toward the interface board until it clicks 
into place (2).
 
fPut the metal (2) and then the plastic (1)   
SO-DIMM covers back on.
 
gPlug the machine’s power cord back into 
the electrical socket first, and then 
connect the interface cable. 
hTurn on the machine’s power switch.
Note
To make sure that you have installed the 
SO-DIMM correctly, you can print the user 
settings page that shows the current 
memory size. (See User Settings List 
on page 98.)
 
12
1
2