Brother DCP 9010CN User Manual

							
Troubleshooting and routine maintenance103
C
jClose the top cover. 
kPut the waste toner box and one drum 
unit and toner cartridges assembly in 
the Styrofoam piece.
 
lUsing two people, place the machine 
into the plastic bag.
mPut the machine and the Styrofoam 
pieces into the carton. Match the front 
side of the machine to the “FRONT” 
mark on the Styrofoam pieces. Put the 
Styrofoam pieces for the drum unit and 
toner cartridge assemblies on the top of 
the machine.
 
nPut the power cord, and the three 
remaining drum unit and toner cartridge 
assemblies into the Styrofoam pieces as 
shown in the illustration.
 
 
						

							
104
oPut the four carton trays on the top. 
pClose the carton and tape it shut.
 
						

							
105
D
D
On-screen 
programming
D
Your machine has been designed to be easy 
to use. The LCD provides on-screen 
programming using the menu keys.
We have created step by step on-screen 
instructions to help you program your 
machine. Simply follow the steps as they 
guide you through the menu selections and 
programming options.
Menu tableD
You can program your machine by using the 
Menu table on page 107. These pages list 
the menu selections and options.
Press  Menu followed by the menu numbers 
to program your machine.
For example, to set  Beeper volume to  Low:
aPress  Menu, 1, 2.
bPress  a or  b to choose  Low.
cPress  OK.
Memory storageD
Your menu settings are stored permanently, 
and in the event of a power failure will  not be 
lost. Temporary settings (for example, 
Contrast)  will be lost.
Menu keysD
Menu and featuresD
 
 
Access the menu.
 Go to the next menu level.
Accept an option.
 Exit the menu by pressing 
repeatedly.
Go back to the previous 
menu level.
 Scroll through the current 
menu level.
 Go back to the previous 
menu level or forward to the 
next menu level.
 Exit the menu or stop the 
current operation.
 
						

							
106
How to access the menu 
modeD
aPress Menu.
bChoose an option.
„ Press  1 for General Setup menu.
„ Press  2 for Copy menu.
„ Press  3 for Printer menu.
„ Press  4 for Network menu.
„ Press  5 for Machine Info. menu.
You can also scroll through each menu 
level by pressing  a or  b for the direction 
you want.
cPress  OK when the option you want 
appears on the LCD.
The LCD will then show the next menu 
level.
dPress  a or  b to scroll to your next menu 
selection.
ePress  OK.
When you have finished setting an 
option, the LCD will show  Accepted.
fPress Stop/Exit  to exit Menu mode.
 
						

							
Menu and features107
D
Menu tableD
The factory settings are shown in Bold with an asterisk.Choose & OK Choose & OK to accept to exit
                      
Main Menu Submenu Menu Selections Options Descriptions Page
1.
General Setup1.Paper 1.Paper Type Thin
Plain*
Thick
Thicker
Recycled Paper Sets the type of paper in 
the paper tray.
23
2.Paper Size A4 *
Letter
Legal
Executive
A5
A5 L
A6
B5
B6
Folio Sets the size of the paper 
in the paper tray.
23
2.Beeper — Off
Low
Med*
High Adjusts the volume level of 
the beeper.
23
3.Ecology 1.Toner Save On
Off* Increases the page yield of 
the toner cartridge.
24
2.Sleep Time Range varies 
depending on model.
005Min* Conserves power. 24
4.
LCD Contrast— b - nnnno + a
b  - nnnon + a
b  - nnonn + a*
b  - nonnn + a
b  - onnnn + a Adjusts the contrast of the 
LCD.
24
 
						

							
108
1.General Setup
(Continued)5.
Document Scan1.Glass ScanSizeA4
*
Letter Adjusts the scan area of 
the scanner glass to the 
size of the document.See 
Software  User’s 
Guide  on 
the 
CD-ROM.
6.Reset 1.Network 1.Reset
2.ExitRestores all network 
settings to factory default.
99
2.
All Settings1.Reset
2.Exit Restores all the machine 
settings to factory default.
99
0.
Local Language— (Choose your  language.) Allows you to change the 
LCD language for your 
country. See 
Quick 
Setup 
Guide.
2.Copy 1.Quality —Text
Photo
Auto* You can choose the Copy 
resolution for your type of 
document.
29
2.Brightness — b - nnnno + a
b  - nnnon + a
b  - nnonn + a*
b  - nonnn + a
b  - onnnn + a Adjust the brightness for 
copies.
30
3.Contrast — b - nnnno + a
b  - nnnon + a
b  - nnonn + a*
b  - nonnn + a
b  - onnnn + a Adjusts the contrast for 
copies.
You can change to the 
higher Copy resolution 
when you make a text 
copy with 100% ratio using 
the scanner glass. 30
Main Menu Submenu Menu Selections Options Descriptions Page
 
						

							
Menu and features109
D
2.Copy
(Continued) 4.Color Adjust1.Red
b - nnnno + a
b  - nnnon + a
b  - nnonn + a*
b  - nonnn + a
b  - onnnn + a Adjusts the red colour for 
copies. 
30
2.Green b - nnnno + a
b  - nnnon + a
b  - nnonn + a*
b  - nonnn + a
b  - onnnn + a Adjusts the green colour 
for copies.
3.Blue b - nnnno + a
b  - nnnon + a
b  - nnonn + a*
b  - nonnn + a
b  - onnnn + a Adjusts the blue colour for 
copies.
3.Printer 1.Emulation —Auto*
HP LaserJet
BR-Script 3 Chooses the emulation 
mode.
See 
Software  User’s 
Guide  on 
the 
CD-ROM.
2.Print Options1.Internal Font1.HP LaserJet Prints a list of the 
machine’s internal fonts.
2.BR-Script 3
2.
Configuration— Prints a list of the  machine’s printer settings.
3.Test Print — Prints a test page.
3.
Output Color— Auto*
Color
B&W Chooses colour or black & 
white printed documents. 
If you choose Auto, the 
machine selects a suitable 
option for the document 
(colour or B&W).
4.
Reset Printer— 1.Reset Restores the printer 
settings to the original 
factory default settings.
2.Exit
5.
Calibration— Calibrate
Reset Adjusts the colour density 
or returns the colour 
calibration to the factory 
settings.  75
6.
Auto Regist.1.Registration1.Start Adjust the print position of 
each colour automatically. 76
2.Exit
2.Frequency Low
Medium*
High
Off Set the interval time you 
want to carry out the auto 
registration.
Main Menu Submenu Menu Selections Options Descriptions Page
 
						

							
110
3.Printer
(Continued)7.Manual Regist.1.Print Chart
— Print the chart to manually 
check the registration of 
the colours. 76
2.Set Regist. 1 Magenta
2 Cyan
3 Yellow
4 Magenta
5 Cyan
6 Yellow
7 Magenta
8 Cyan
9 Yellow Sets the correction value 
on the chart you printed 
from 
Print Chart .
8.
Drum Cleaning— — Carry out cleaning the  drum unit to improve the 
print quality problem.70
4.Network 1.TCP/IP 1.Boot Method Auto *
Static
RARP
BOOTP
DHCP Chooses the BOOT 
method that best suits your 
needs.
See 
Network 
User’s 
Guide  on 
the 
CD-ROM.
2.IP Address [000-255]. [000-255]. 
[000-255]. [000-255] Enter the IP address.
3.Subnet Mask [000-255]. [000-255]. 
[000-255]. [000-255] Enter the Subnet mask.
4.Gateway [000-255]. [000-255]. 
[000-255]. [000-255] Enter the Gateway 
address.
5.Node Name
BRNXXXXXXXXXXXXEnter the Node name.
6.WINS Config Auto *
Static Chooses the WINS 
configuration mode.
7.WINS Server Primary
[000-255]. [000-255]. 
[000-255]. [000-255]
Secondary
[000-255]. [000-255]. 
[000-255]. [000-255] Specifies the IP address of 
the primary or secondary 
WINS server.
Main Menu Submenu Menu Selections Options Descriptions Page
 
						

							
Menu and features111
D
4.Network
(Continued) 1.TCP/IP
(Continued)8.DNS Server
Primary
[000-255]. [000-255]. 
[000-255]. [000-255]
Secondary
[000-255]. [000-255]. 
[000-255]. [000-255] Specifies the IP address of 
the primary or secondary 
DNS server.See 
Network  User’s 
Guide  
on the 
CD-ROM.
9.APIPA On *
Off Automatically allocates the 
IP address from the link-
local address range.
0.IPv6 On
Off* Enable or Disable the IPv6 
protocol. If you want to use 
the IPv6 protocol, visit 
http://solutions.brother. 
com/ for more information.
2.Ethernet — Auto*
100B-FD
100B-HD
10B-FD
10B-HD Chooses the Ethernet link 
mode.
0.
Network Reset1.Reset — Restore all network 
settings to factory default.
2.Exit —
5.
Machine Info.1.Serial No. — — You can check the serial 
number of your machine.98
2.
Page Counter— Total
List
Copy
Print You can check the number 
of total pages the machine 
has printed during its life.
98
3.
User Settings— — Lists your settings. 98
4.
Network Config— — Lists your Network  settings.99
5.Parts Life 1.Drum 1.Black(K)
2.Cyan(C)
3.Magenta(M)
4.Yellow(Y)You can check the 
percentage of a machine 
part’s life that remains 
available.
99
2.Belt Unit —
3.PF Kit —
4.Fuser —
Main Menu Submenu Menu Selections Options Descriptions Page
 
						

							
112
Entering textD
When setting certain menu selections, you will need to type text characters. The numeric keys 
have letters printed on them.
Press the appropriate numeric key the number of times shown in this reference table to access 
the character you want.
Inserting spaces
To enter a space in a number, press c once between numbers. To enter a space in a name, 
press c twice between characters.
Making corrections
If you entered a letter incorrectly and want to change it, press  d to move the cursor to the incorrect 
character, and then press  Clear/Back.
Repeating letters
To enter a character on the same key as the previous character, press  c to move the cursor right 
before pressing the key again.
Press 
Keyone 
timetwo 
timesthree 
timesfour 
timesfive 
timessix 
timesseven  timeseight 
timesnine 
times
1 111111111
2 abcABC2ab
3 de fDEF3de
4 gh iGHI 4gh
5 jklJKL5jk
6 mn oMNO6mn
7 pq r sPQRS7
8 tuvTUV8tu
9 w x y zWXYZ 9
0 000000000
# _________
l –––––––––