Brother DCP 9010CN User Manual

23
3
3
Paper settings3
Paper Type3
Set up the machine for the type of paper you 
are using. This will give you the best print 
quality.
aPress Menu, 1, 1,  1.
bPress  a or  b to choose  Thin, Plain , 
Thick , Thicker  or 
Recycled Paper .
Press  OK.
cPress  Stop/Exit .
Paper Size3
You can use ten sizes of paper for printing 
copies: A4, Letter, Legal, Executive, A5, 
A5 L, A6, B5, B6 and Folio. 
When you change the size of paper in the 
tray, you will also need to change the setting 
for paper size at...

Chapter 3
24
Ecology features3
Toner Save3
You can save toner using this feature. When 
you set Toner Save to  On, prints appear 
lighter. The default setting is  Off.
a Press  Menu, 1 , 3, 1.
bPress  a or  b to choose  On or  Off .
Press  OK.
cPress  Stop/Exit .
Note
We do not recommend Toner Save for 
printing Photo or Greyscale images.
 
Sleep Time3
The Sleep Time setting can reduce power 
consumption by turning off the fuser while the 
machine is idle.
You can choose how long the machine must 
be...

Section II
CopyII
Making copies26
 

26
4
How to copy4
Copy mode4
 
1 Stack/Sort
2 Copy ratio and Copy layout
3 Contrast
4 Quality
5 Number of copies
Making a single copy4
aLoad your document in the ADF or on 
the scanner glass.
bPress  Mono Start  or Colour Start .
Making multiple copies4
aLoad your document.
bUse the numeric keys to enter the 
number of copies (up to 99).
cPress Mono Start  or Colour Start .
Note
• To sort your copies, see  Sorting copies 
using the ADF  on page 29.
• If the LCD shows  Please Wait and the 
machine stops...

Making copies27
4
Copy options 
(temporary settings)
4
When you want to quickly change the copy 
settings temporarily for the next copy, use the 
temporary Copy keys. You can use different 
combinations.
 
The machine returns to its default settings 
one minute after copying.
Enlarging or reducing the 
image copied4
You can choose the following enlargement or 
reduction ratios:
* The factory setting is shown in Bold with an 
asterisk.
Custom(25-400%)  allows you to enter a 
ratio from  25% to 400% . To...

Chapter 4
28
Using the Options key4
Use the  Options  key to quickly set the following copy settings temporarily for the next copy.
Press
 
Menu selections Options Page
Press a or  b, then press  OK
 
Press a or  b, then press  OK
 
Stack/Sort
(appears when the document 
is in the ADF) Stack
*
Sort 29
Brightness b - onnnn + a
b  - nonnn + a
b  - nnonn + a *
b  - nnnon + a
b  - nnnno + a 30
Contrast b - onnnn + a
b  - nonnn + a
b  - nnonn + a *
b  - nnnon + a
b  - nnnno + a 30
Page Layout Off(1 in 1)*
2...

Making copies29
4
Improving copy quality4
You can choose from a range of quality 
settings. The default setting is  Auto.
„ Auto
Auto is the recommended mode for 
ordinary printouts. Suitable for documents 
that contain both text and photographs.
„ Photo
Suitable for copying photographs.
„ Text
Suitable for documents containing only 
text.
To  temporarily  change the quality setting, 
follow the steps below:
aLoad your document.
bUse the numeric keys to enter the 
number of copies (up to 99).
cPress...

Chapter 4
30
Adjusting Contrast, Colour 
and Brightness4
Contrast4
Adjust the contrast to help an image look 
sharper and more vivid.
To  temporarily  change the contrast setting, 
follow the steps below:
aLoad your document.
bUse the numeric keys to enter the 
number of copies (up to 99).
cPress  Options .
Press  a or  b to choose  Contrast.
Press  OK.
dPress  a or  b to increase or decrease the 
contrast.
Press  OK.
ePress  Mono Start  or Colour Start .
To change the  default setting follow the steps...

Making copies31
4
Making N in 1 copies 
(page layout)4
You can reduce the amount of paper used 
when copying by using the N in 1 copy 
feature. This allows you to copy two or four 
pages onto one page, which lets you save 
paper.
IMPORTANT
• Please make sure the paper size is set to 
A4 , Letter , Legal  or Folio .
•( P) means Portrait and ( L) means 
Landscape.
• You cannot use the Enlarge/Reduce  setting with the N in 1 feature.
 
aLoad your document.
bUse the numeric keys to enter the 
number of...

Chapter 4
32
Out of memory 
message
4
If the memory becomes full while you are 
making copies, the LCD message will guide 
you through the next step.
If you get an  Out of Memory  message 
while scanning a subsequent page, you will 
have the option to press  Mono Start or 
Colour Start  to copy the pages scanned so 
far, or to press  Stop/Exit to cancel the 
operation.
To gain extra memory:
„ Add optional memory. (See  Memory 
board  on page 41.)