Black and Decker SPACEMAKER TOASTER OVEN TROS1000D User Manual

							\037\036
UNDER THE CABINET \FTOASTER OVEN 
HORNO  TOSTADOR   PARA INSTALAR   DEBAJO DEL GABINET\FE 
GRILLE-PAIN FOUR ACCROCHABLE
U\fe & Ca\be Manual
manual de u\fo y cuida\Fdo
guide d’utili\fation et d ’ent\betien
TROS1000D
SPACEMAKER 
						

							2
•  Read all instructions
•  Do not touch hot surfaces. Use handles or knobs.
•  To protect against electrical shock do not immerse 
cord, plugs or appliance in water or other liquid.
•   Close supervision is necessary when any appliance 
is used by or near children.
•  Unplug from outlet when not in use and before 
cleaning. Allow to cool before putting on or taking 
off parts.
•   Do not operate any appliance with a damaged cord 
or plug or after the appliance malfunctions, has 
been dropped, or damaged in any manner. Call the 
appropriate toll-free number listed in this manual.
•  The use of accessory attachments not 
recommended by the appliance manufacturer may 
cause injuries.
•  Do not use outdoors.
•  Do not let cord hang over edge of table or counter, 
or touch hot surfaces.
•  Do not place on or near a hot gas or electric 
burner, or in a heated oven.
•  Extreme caution must be used when moving an 
appliance containing hot oil or other hot liquids.
•  To disconnect, turn any control to OFF, then 
remove plug from wall outlet.
•  Do not use appliance for other than intended use.
•  Oversized foods or metal utensils must not be 
inserted in a toaster-oven as they may create a fire 
or risk of electric shock. • 
A fire may occur if toaster-oven is covered or 
touching flammable material, including curtains, 
draperies, walls and the like, when in operation. Do 
not store any item on top of the appliance when in 
operation.
•  Do not clean with metal scouring pads. Pieces 
can break off the pad and touch electrical parts 
involving a risk of electric shock.
•  Extreme caution must be exercised when using 
containers constructed of other than metal or 
glass.
•  Do not store any materials, other than the 
manufacturer’s recommended accessories, in this 
oven when not in use.
•  Do not place any of the following materials in the 
oven: paper, cardboard, plastic and the like.
•  Do not cover crumb tray or any part of the oven 
with metal foil. This will cause overheating of the 
oven.
•  To reduce the risk of fire, do not place any heating 
or cooking appliance beneath the appliance.
•  To reduce the risk of fire, do not mount unit over or 
near any portion of a heating or cooking appliance.
•  To reduce the risk of electric shock, do not mount 
over a sink.
•  To reduce the risk of fire, do not store anything 
directly on top of the appliance surface when the 
appliance is in operation.
•  Do not allow cord(s) to contact rear surface of 
toaster oven.
IMPORTANT SAFETY INSTR\fCTIONS
When using electrical appliances, basic safety precautions should always 
be followed, including the following:
SAVE THESE INSTR\fCTIONS.
Th\bs product \bs for household use only.
GRO\fNDED PL\fG
As a safety feature, this product is equipped with a 
grounded plug, which will only fit into a three-prong outlet. 
Do not attempt to defeat this safety feature. Improper 
connection of the grounding conductor may result in the risk 
of electric shock. Consult a qualified electrician if you are in 
doubt as to whether the outlet is properly grounded.
TAMPER-RESISTANT SCREW
Warning:  This appliance is equipped with a tamper-
resistant screw to prevent removal of the outer cover. To 
reduce the risk of fire or electric shock, do not attempt 
to remove the outer cover. There are no user-serviceable 
parts inside. Repair should be done only by authorized 
service personnel.ELECTRICAL CORD
1)   A short power-supply cord is provided to reduce the risk 
resulting from becoming entangled in or tripping over a 
longer cord.
2)  Longer detachable power-supply cords or extension 
cords are available and may be used if care is exercised 
in their use.
3)  If a long detachable power-supply cord or extension cord 
is used:
  a)   The marked electrical rating of the extension cord 
should be at least as great as the electrical rating of the 
appliance,
  b)    If the appliance is of the grounded type, the extension 
cord should be a grounding-type 3-wire cord, and
  c)    The longer cord should be arranged so that it will not 
drape over the countertop or tabletop where it can be 
pulled on by children or tripped over.
Note:  If the power supply cord is damaged, it should be 
replaced by qualified personnel. In Latin America, by an 
authorized service center.    
						

							3
GETTING TO KNOW YOUR  
UNDER THE CABINET \VTOASTER OVEN
1.     Mounting hood / deflecto\b † 
(Pa\bt # TROS001)
2.   Mounted unit
3.   Digital di\fplay
4.   Cont\bol panel
5.   D\bopdown c\bumb t\bay
6.   Slide \back † (Pa\bt # TROS008) 7.
   Rack \flot\f (both \fide\f)
8.     Co\bd management hook  
(n ot \f h ow n)
9.     Black mounting kit †
 
(Pa\bt # TROS009-02)  
(n ot \f h ow n)
N\fte:   † indicate\f con\fume\b 
\beplaceable/\bemovable pa\bt\f
1
2
3
7 4
6 5  
						

							4
CONTRO\b PANE\b
1.    Digital di\fplay
2.   Powe\b ON indicato\b light
3.   START button
4.   BAKE button
5.   Time / Temp inc\bea\fe button 6. 
 Time / Temp dec\bea\fe button
7.    CANCEL button
8.   TIMER button
9.   KEEP WARM button
10.   TOAST button
2 1
3
4
10
5
9
6
8
7  
						

							5
SPACERS
SCREWS
WASHERS
MOUNTING
•     Mounting Pa\bt\f 
(Pa\bt # SDC-MOUNTING KIT)  
  16 Space\b\f 
    4: 
1⁄2" 
    4: 1⁄4" 
    4: 3⁄16" 
    4: 1⁄16" 
  12 Sc\bew\f  
    4: 1"  
    4: 1
3⁄4" 
    4: 21⁄4" 
  4 Wa\fhe\b\f
•   Mounting Template (in box) You will al\fo need:
•  Tape
•   Rule\b (o\b you may cut out the  
\bule\b p\bovided on the template)
•   Elect\bic d\bill with\F a 
1⁄4" d\bill bit
A  
						

							6
GETTING STARTED
• Remove all packing mate\bial, label\f, and an\Fy \fticke\b\f.
•  Remove and \fave lite\batu\be.
•  Unpack mounting pa\bt\F\f and \fet them a\fide \Fin a \fafe place whe\be they 
will not \boll away o\b get lo\ft.
  Imp\frtant: D\f n\ft attempt t\f \fperate appliance until it is pr\fperly 
installed.
CHOOSE A \bOCATION 
When choo\fing you\b location, con\fide\b the following:
• DO make \fu\be to mount within \beach of an elect\bica\Fl outlet.
•  DO con\fide\b you\b no\bmal wo\bk patte\bn\f in the kitchen when choo\fing \Flocation.
•  DO NOT mount ove\b any heating o\b cooking appliance \fuch a\f you\b \bange o\b  
oven.
  N\fte: Do not in\ftall clo\fe\b than 4 i\Fnche\f to any ve\btical \fu\bface o\b to any 
ho\bizontal \fu\bface beneath the unit.
•  DO NOT mount ove\b o\b nea\b a \fink.
•  DO NOT mount unde\b, in f\bont of o\b behind an\Fy unde\b-cabinet ligh\Ft 
fixtu\be\f.
  N\fte: If you a\be mounting multipl\Fe †SpaceMake\b™ appliance\f (A):
 •   Allow at lea\ft 4” between the \fide oppo\fi\Fte the cont\bol panel 
of you\b oven and the adjacent wall o\b the othe\b app\Fliance. 
  •   Allow at lea\ft 1” between the cont\bol panel \fide of you\b oven 
and the adjacent wall o\b the othe\b app\Fliance. 
  Cauti\fn: This appliance features a Save-A-Plug™ \futlet receptacle t\f 
c\fnnect smaller †SpaceMaker™ appliances such as the can \V\fpener.  
DO NOT USE THIS OUT\bET F\VOR ANY OTHER APP\bIANCE!
  Cauti\fn: When selectin\Vg a l\fcati\fn f\fr y\fur t\faster \fven, make sure 
y\fu have adequate r\f\fm t\f reach the Rear Receptacle.
  N\fte: If you a\be connecting anothe\b †\FSpaceMake\b™ appliance into the 
Save-A-Plug™ outlet, make \fu\be you can ea\fily unplug \Fthe appliance 
afte\b each u\fe.  
						

							7
DETERMINE CABINET \VTYPE
P\bio\b to taping the mounti\Fng template and beginning to d\bill you\b hole\f, 
dete\bmine if you\b cabinet ha\f a flat bottom (B) o\b an ove\bhang molding (C). 
If you\b cabinet i\f flat, follow STANDARD INSTA\b\bATION; if the cabinet ha\f \F
an ove\bhang molding, \befe\b to OVERHANG MO\bDING INS\VTA\b\bATION.
STANDARD INSTA\b\bATION (F\bAT CABINET)
Imp\frtant: Always wear pr\ftective glasses \fr g\fggles t\f prevent injury 
when drilling.1.   Clea\b counte\btop unde\b in\ftallation a\bea to avoid getting du\ft o\b 
deb\bi\f on othe\b appl\Fiance\f o\b item\f. Open cabinet\f a\Fnd \bemove 
content\f to make mounting ea\fie\b.
2.    Clean both the unde\F\b\fide and top\fide of 
the bottom panel of the cab\Finet.
3.    With cabinet doo\b\f op\Fen, place 
mounting template flu\fh again\ft 
the \fu\bface of the unde\b\fide \Fof you\b 
cabinet, making \fu\be to align thick line 
on template with bottom f\bont edge of 
you\b cabinet (D).
   Imp\frtant: D\f n\ft ali\Vgn screw h\fles \fn 
template directly under the parti\Vti\fn 
between cabinets, as thi\Vs will prevent y\fu fr\fm installing the 
appliance pr\fperly. Pay cl\fse attenti\fn t\f where the drill h\fles will 
be set s\f as n\ft t\f damage y\fur cabinets during\V m\funting. Drilling \V
thr\fugh y\fur cabinet’s partiti\fn may cause damage t\f cabinets 
and prevent pr\fper installati\fn.
4.    Fold the template along the edge of\F you\b cabinet \fo the t\Fhick line 
i\f \ft\baight with bottom f\bont edge; pull 
template tight and tape do\Fwn to hold 
in place.
5.    D\billing f\bom unde\b the cabine\Ft up, d\bill 
hole\f th\bough the 4 place\f ma\bked on 
the template, u\fing a 
 1⁄4" d\bill bit (E).
Imp\frtant: Always ensure y\fu are drilling 
straight up thr\fugh the marked m\funting 
h\fle \fn the template. Drilling at an angle 
may prevent pr\fper installati\fn and may 
damage cabinets if \Vthe drill bit pierces the partiti\fn.
B C
D
E  
						

							8
6. Once hole\f a\be d\billed, \bemove tape and mounting\F template.
7.    Wipe du\ft and deb\bi\f off the\F top\fide and unde\b\fide\F of the cabinet 
\fu\bface.
8.     Place a wa\fhe\b in\fide the cabi\Fnet ove\b each of the 4 ho\Fle\f you d\billed.
9.    Hold hood in place, aligning f\bont of hood with f\F\bont edge of 
cabinet; d\billed ho\Fle\f on cabinet \fhoul\Fd be aligned with m\Founting 
hole\f on the hood.
10.    D\bop one of you\b \fc\bew\f th\bough each of the wa\fhe\b\f cove\bing the 
hole\f in the cabine\Ft, f\bom in\fide the cabin\Fet down.
N\fte: To dete\bmine which \fc\bew\f to u\fe, you mu\ft have enough of the 
\fc\bew expo\fed unde\bneath the cabinet to p\bope\bly th\bead the \fc\bew into 
the nut. 
11.    Sc\bewing f\bom in\fide the cabin\Fet down into hole\f, tighten 4 \fc\bew\f 
in place to \fecu\be hood to cabinet.
N\fte: Alway\f tighten \fc\bew\f to en\fu\be the 
appliance doe\f not move o\b \fhake du\bing 
ope\bation.
12.    Afte\b the hood i\f \fecu\b\Fed, lift the toa\fte\b 
oven up to mount. Hook the \Fmounting tab\f 
on the f\bont of the oven ove\b the mounting 
hook\f at the f\bont of the hood. (\FF).
Imp\frtant: D\f n\ft pu\Vt m\funting h\f\fks \fn \V
h\f\fd thr\fugh the m\funting ta\Vbs \fn the 
\fven. Y\fu must h\f\fk the tabs up a\Vnd \fver 
the h\f\fks t\f pr\fperly h\fld. 
13.    Once the back hook\f a\be \fecu\be, hook 
you\b finge\b\f a\bound the feet on the back 
of the toa\fte\b oven (G). Pu\fh back and up 
on the feet at the \fame time to engage 
the f\bont hook\f.
14.    Plug into \ftanda\bd elect\bical outlet\F. Ext\ba 
co\bd can be hung ove\b co\bd management 
hook behind unit (\FH).
Warning: Risk \ff elect\Vrical sh\fck and fire. D\f 
n\ft all\fw c\frd t\f t\fuch rear surface \ff \fven.
Cauti\fn: This appliance features a Save-A-
Plug™ \futlet receptacle t\f c\fnnect smaller 
†SpaceMaker™ appliances such as the can \V
\fpener. D\f n\ft use this \fu\Vtlet f\fr any \fther 
appliance!
N\fte: If you a\be connecting anothe\b 
†SpaceMake\b™ appliance into the Save-A-Plug™ 
outlet, make \fu\be you can ea\fily unplug \Fthe 
appliance afte\b each u\fe.
12.    You\b †SpaceMake\b™ appliance i\f now \beady fo\b u\fe!
F
G
H  
						

							9
OVERHANG MO\bDING INS\VTA\b\bATION
F\fr cabinets with an\V \fverhang m\flding (see Illustrati\fn C)
Imp\frtant: Always wear pr\ftective glasses \fr g\fggles t\f prevent injury 
when drilling.
N\fte: Space\b\f a\be p\bovided in ca\fe you\b cabinet ha\f an ove\bhang molding at 
the f\bont edge. Only u\fe \fpace\b\f on the \bea\b \fc\bew\f of the appliance to en\fu\be 
it i\f level with the f\bont.1.   Clea\b counte\btop unde\b in\ftallation a\bea 
to avoid getting on oth\Fe\b appliance\f 
o\b item\f. Open cabinet\f a\Fnd \bemove 
content\f to make mounting ea\fie\b.
2.    Clean both the unde\F\b\fide and top\fide of 
the bottom panel of the cab\Finet.
3.    U\fing a \bule\b, mea\fu\be the thickne\f\f of the 
ove\bhang molding (I),\F accu\bately noting 
the numbe\b fo\b u\fe in the following \ftep.
N\fte: If you do not have a \bule\b, you may cut out the pape\b \F\bule\b p\bovided 
on the edge of you\b mounting template.
4.     Afte\b mea\fu\bing the ove\bhang molding thic\Fkne\f\f a\f \fhown in Illu\ft\bation 
I, look at the da\fhed line\f o\Fn the mounting template; each line ha\f a 
mea\fu\bement next to it that indicate\f the thickne\f\f of the ove\bhang 
molding u\fed with t\Fhat line. Fo\b example, if you\b cabinet ha\f an 
ove\bhang molding thic\Fkne\f\f of 
1⁄2”, you will 
u\fe the 1⁄2” da\fhed line on th\Fe template. 
5.    Fold the template along the da\fhed 
line that matche\f the thickne\f\f of you\b 
ove\bhang molding.
6.     Place the folded template again\ft the back 
edge of the ove\bhang molding, maki\Fng \fu\be 
the \fide with the d\F\bill hole ma\bk\f i\f facing 
down (J).
Imp\frtant: D\f n\ft ali\Vgn screw h\fles \fn 
template directly under the parti\Vti\fn between cabinets, as thi\Vs will 
prevent y\fu fr\fm installing the appliance pr\fperly. Pay cl\fse attenti\fn 
t\f where the drill h\fles will b\Ve set s\f as n\ft t\f damage y\fur cabinets 
during m\funting. Dr\Villing thr\fugh y\fur cabinet’s partiti\fn may cause 
damage t\f cabinets and prevent pr\fper installati\fn.
7.    Making \fu\be to keep the fold line \ft\baight 
again\ft the back edge of \Fthe ove\bhang 
molding, tape the t\Femplate \fecu\bely in 
place.
8.    D\billing f\bom unde\b\fide of the\F cabinet up, 
d\bill hole\f th\bough the 4 place\f ma\bked on 
the template u\fing a 
1⁄4" d\bill bit (K).
Imp\frtant: Always ensure y\fu are drilling 
straight up thr\fugh the marked m\funting 
h\fle \fn the template. Drilling at an angle may 
prevent pr\fper installati\fn and may damage cabinets i\Vf the drill bit 
pierces the partiti\fn.
9.  Once hole\f a\be d\billed, \bemove tape and mounting\F template. I
J
K  
						

							10
10.   Wipe du\ft and deb\bi\f off the\F top\fide and unde\b\fide\F of the cabinet 
\fu\bface.
11.    Place a wa\fhe\b in\fide the cabi\Fnet ove\b 
each of the 4 hole\f\F you d\billed.
12.    Now, u\fe you\b \bule\b o\b the pape\F\b \bule\b 
p\bovided to mea\fu\be the ove\bhang 
molding height, placing you\b \bule\b ve\btically 
again\ft the unde\b\fide of \Fthe cabinet 
behind the ove\bhang molding. Thi\f numbe\b 
dete\bmine\f the numbe\b o\Ff \fpace\b\f you 
need, u\fing a numbe\F\b of \fpace\b\f equal to 
the ove\bhang molding heig\Fht. Fo\b example, 
a 1” ove\bhang molding would u\fe 2, 
 1⁄2” 
\fpace\b\f on each of the \b\Fea\b hole\f (L).
13.    D\bop one of you\b \fc\bew\f th\bough each of the wa\fhe\b\f cove\bing the 
hole\f in the cabine\Ft, f\bom in\fide the cabin\Fet down.
N\fte: To dete\bmine which \fc\bew\f to u\fe, you mu\ft have enough of the \fc\b\Few 
expo\fed unde\bneath the cabinet to p\bope\bly th\bead the \fc\bew into the nut.
14.    Place the app\bop\biate numbe\b of \fpace\b\f dete\bmined in \ftep 12 on 
both of the \bea\b \fc\bew\f \fo the appliance will be even (M).
N\fte: If the height of \Fyou\b ove\bhang molding 
i\f too tall to be accommodated by the numbe\b 
of \fpace\b\f p\bovided, you may call, toll-f\bee, at 
1-800-231-9786 to o\bde\b additional \fpace\b\f at 
no cha\bge.   
N\fte: Fo\b \fpace\b in\ftallation, you may \bequi\be 
a\f\fi\ftance in o\bde\b to hold \fpace\b\f in place 
while \fecu\bing the \Fappliance at the \fame time. 
If a\f\fi\ftance i\f not available, u\fe a \fmall clamp 
to hold the \fpace\b\f in place while you po\fition 
the appliance.
15.    Once \fpace\b\f a\be \fet, hold hood up\F and tighten \fc\bew\f to \fecu\be. 
Sc\bew f\bom in\fide the cabin\Fet down. 
N\fte: Alway\f tighten \fc\bew\f to en\fu\be the appliance doe\f not move o\b 
\fhake du\bing ope\bation.
16.    Afte\b the hood i\f \fecu\b\Fed, lift the toa\fte\b oven up to mount. Hook the 
mounting tab\f on th\Fe back of the oven ove\b the mounting hoo\Fk\f at 
the back of the hoo\Fd (\fee Illu\ft\bation F).
17.    Once the back hook\f a\be \fecu\be, hook you\b finge\b\f a\bound the feet 
on the f\bont of the toa\fte\b oven (\fee Illu\ft\bation G). Pull fo\bwa\bd and 
pu\fh up on the feet at the \fame time to engage the f\bont hook\f.
18.    Plug into \ftanda\bd elect\bical outlet\F. Ext\ba co\bd can be hung ove\b co\bd 
management hook beh\Find unit (\fee Illu\ft\bation H).
Warning: Risk \ff elect\Vrical sh\fck and fire. D\f n\ft all\fw c\frd t\f t\fuch 
rear surface \ff \fven.
Cauti\fn: This appliance features a Save-A-Plug™ \futlet receptacle t\f 
c\fnnect smaller †SpaceMaker™ appliances such as the can \V\fpener. D\f 
n\ft use this \futlet f\V\fr any \fther appliance!
N\fte: If you a\be connecting anothe\b †\FSpaceMake\b™ appliance into the Save-A-
Plug™ outlet, make \fu\be you can ea\fily unplug \Fthe appliance afte\b each u\fe.
19.    You\b †SpaceMake\b™ appliance i\f now \beady fo\b u\fe!
L
M