BenQ Projector SU964 User Manual

  11
  Overview
EnglishRemote control
1.Power ON/OFF
Toggles the projector between standby mode 
and on.
2. Source selection keys
Selects an input source for display.
3. MENU/EXIT
Turns on the On-Screen Display (OSD) menu. 
Goes back to previous OSD menu, exits and 
saves menu settings.
4. Arrow/Keystone keys (Left  / , Up /, 
Right / , Down / )
Moves the current On-Screen Display (OSD) 
menu selection in the direction of the arrow 
being pressed when the OSD menu is activated.
Manually corrects...

12 Positioning your projector  
English
Positioning your projector
Choosing a location
Your projector is designed to be installed in one of four possible installation locations.
Your room layout or personal preference will dictate which installation location you select. Take into 
consideration the size and position of your screen, the location of a suitable power outlet, as well as the 
location and distance between the projector and the rest of your equipment.
*To set the projector position:
1. Press...

  13
  Positioning your projector
EnglishObtaining a preferred projected image size
The distance from the projector lens to the screen, the zoom setting, and the video format each factors 
in the projected image size.
This projector is equipped with a movable lens. See Shifting the projection lens on page 15 for details. 
You can see the diagrams on pages 14 for the vertical offset values in the dimension tables that are 
measured when the lens is shifted fully up or down.
If you have a...

14 Positioning your projector  
EnglishProjection dimensions
Installation for a 16:10 ratio screen
 The screen aspect ratio is 16:10 and the projected picture is 16:10
The above numbers are approximate and may be slightly different from the actual measurements. Only the 
recommended screen sizes are listed. If your screen size is not in the table above, please contact your dealer 
for assistance.




Floor Installation
: Screen             : Center of lens
 
 

Ceiling Installation
: Screen             :...

  15
  Positioning your projector
EnglishShifting the projection lens
The lens shift control provides flexibility for installing your projector. It allows the projector to be 
positioned off the center of the screen.
The lens shift is expressed as a percentage of the projected image height or width. It is measured as an 
offset from the projected image’s vertical or horizontal center. You can use the lever to shift the 
projection lens in any direction within the allowable range depending on your desired...

16 Connecting to video equipment  
English
Connecting to video equipment
You can connect the projector to any type of video equipment, such as a DVD or Blu-ray player, digital 
tuner, cable or satellite decoder, video game console or digital camera. You can also connect it to a 
desktop or laptop PC or Apple Macintosh system. You can connect the projector to a source device 
using just one of the connecting methods; however, each provides a different level of video quality. The 
method you choose will...

  17
  Connecting to video equipment
EnglishConnecting component-video devices
Be sure to match the corresponding colors between the cables and the terminals. The BNC type 
component video jacks are provided for connection to video output devices. The audio connections are 
provided for informational purposes only. You can also connect the separate audio cable to a suitable 
audio amplifier.
Connecting video devices
The audio connections are provided for informational purposes only. You can also connect...

18 Connecting to video equipment  
EnglishConnecting a computer
Connect the projector to a computer with a VGA cable. 
Many laptops do not turn on their external video ports when connected to a projector. Usually a key 
combination like Fn + F3 or CRT/LCD key turns the external display on/off. Locate a function key labeled 
CRT/LCD or a function key with a monitor symbol on the laptop. Press Fn and the labeled function key 
simultaneously. Refer to your laptop
s documentation to discover your laptops key...

  19
  Connecting to video equipment
EnglishConnecting multiple sources through HDBaseT
HDBaseT is a connectivity standard that combines HD digital video, audio, Ethernet, power over cable, and 
various control signals. These signals are transmitted with one CAT5e (or above) cable up to 100 meters in 
length. With the use of HDBaseT switching matrix (commercially available), you may connect multiple 
sources to your projector with HDBaseT connection.
The illustration below is for reference only, actual...

20 Using the projector  
English
Using the projector
Preparations
1. Plug in and turn all of the connected equipment on.
2. If not already in, plug the supplied power cable into the AC inlet 
on the rear of the projector.
3. Plug the power cable into a wall power outlet and turn the wall 
switch on.
Please use the original accessories (e.g. power cable) only with the 
device to avoid possible dangers such as electric shock and fire.
Turning the projector on
Follow the steps below
1. Make sure the Power...